ZAKIR HOSSAIN, K.M., AHMED, I., PARSONS, A.J., SCOTCHFORD, C.A., WALKER, G.S., THIELEMANS, W. and RUDD, C.D., 2012. Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly (lactic acid) Journal of Materials Science. 47(6), 2675-2686 FELFEL, R.M., AHMED, I., PARSONS, A.J., HAQUE, P., WALKER, G.S. and RUDD, C.D., 2012. Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plates Journal of Biomaterials Applications. 26(7), 765-789 PARSONS, A.J., AHMED, I., NIAZI, M.I.K., HABEB, R.R., FITZPATRICK, B., WALKER, G.S., JONES, I.A. and RUDD, C.D., 2011. Mechanical and degradation properties of phosphate based glass fibre/PLA composites with different fibre treatment regimes Science and Engineering of Composite Materials. 17(4), 243-260 KHAN, RA, PARSONS, AJ, JONES, IA, WALKER, GS and RUDD, CD, 2010. Degradation And Interfacial Properties Of Iron Phosphate Glass Fiber-Reinforced Pcl-Based Composite For Synthetic Bone Replacement Materials Polymer-Plastics Technology And Engineering. 49(12), 1265-1274 HABEB, RR, GLOWACZ, F, WALKER, GS, JONES, IA and RUDD, CD, 2010. Fabrication Effects On Properties Of Composites For Medical Applications: 2-Retention Of Composite Mechanical Properties Journal Of Reinforced Plastics And Composites. 29(12), 1804-1813 KHAN, RA, PARSONS, AJ, JONES, IA, WALKER, GS and RUDD, CD, 2010. Preparation And Characterization Of Phosphate Glass Fibers And Fabrication Of Poly(Caprolactone) Matrix Resorbable Composites Journal Of Reinforced Plastics And Composites. 29(12), 1838-1850 HAQUE, P, PARSONS, AJ, BARKER, IA, AHMED, I, IRVINE, DJ, WALKER, GS and RUDD, CD, 2010. Interfacial Properties Of Phosphate Glass Fibres/Pla Composites: Effect Of The End Functionalities Of Oligomeric Pla Coupling Agents HAQUE, P., BARKER, I.A., PARSONS, A., THURECHT, K.J., AHMED, I., WALKER, G.S., RUDD, C.D. and IRVINE, D.J., 2010. Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber-reinforced PLA composites Journal Of Polymer Science Part A:Polymer Chemistry. 48(14), 3082-3094 WONG, K.H., PICKERING, S.J. and RUDD, C.D., 2010. Recycled carbon fibre reinforced polymer composite for electromagnetic interference shielding Composites Part A: Applied Science and Manufacturing. 41(6), 693-702 PARSONS, A.J., AHMED, I., RUDD, C.D., CUELLO, G.J., PELLEGRINI, E., RICHARD, D. and JOHNSON, M.R., 2010. Neutron scattering and ab initio molecular dynamic study of cross-linking in biomedical phosphate glasses Journal of Physics: Condensed Matter. 22(48), 485403 EFEOGLU,, BURKE,, PARSONS,, AITCHISON,, SCOTCHFORD,, RUDD,, VIKRAM, and FISHER,, 2009. Analysis of calvarial bone defects in rats using microcomputed tomography: potential for a novel composite material and a new quantitative measurement. The British journal of oral & maxillofacial surgery. AHMED, I., CRONIN, P.S., ABOU NEEL, E.A., PARSONS, A.J., KNOWLES, J.C. and RUDD, C.D., 2009. Retention of Mechanical Properties and Cytocompatibility of a Phosphate-Based Glass Fibre / Polylactic acid Composite. Journal of Biomedical Materials Research.Part B: Applied Biomaterials. 89B(1), 18-27 PARSONS, A.J., AHMED, I., HAQUE, P., FITZPATRICK, B., NIAZI, M.I.K., WALKER, G.S. and RUDD, C.D., 2009. Phosphate glass fibre composites for bone repair Journal of Bionic Engineering. 6(4), 318-323 PARSONS, AJ, AHMED, I, JONES, IA, SCOTCHFORD, CA, WALKER, GS and RUDD, CD, 2009. Composites For Bone Repair: Phosphate Glass Fibre Reinforced Pla With Varying Fibre Architecture
COZIEN-CAZUC, S, PARSONS, AJ, WALKER, GS, JONES, IA and RUDD, CD, 2009. Real-Time Dissolution Of P40na20ca16mg24 Phosphate Glass Fibers Journal Of Non-Crystalline Solids. 355(50-51), 2514-2521 LIN, H, SHERBURN, M, LONG, AC, CLIFFORD, MJ, JONES, IA and RUDD, C, 2009. Modelling And Simulations Of Fabrics Using Texgen
KHAN, RA, PARSONS, AJ, JONES, IA, WALKER, GS and RUDD, CD, 2009. Surface Treatment Of Phosphate Glass Fibers Using 2-Hydroxyethyl Methacrylate: Fabrication Of Poly(Caprolactone)-Based Composites Journal Of Applied Polymer Science. 111(1), 246-254 PARSONS, AJ, AHMED, I, HAQUE, P, NIAZI, MIK, WALKER, GS and RUDD, CD, 2009. Improving Phosphate Glass Fibre Performance In Composites
TIETJE, C, GINDY, N, MILES, NJ, DARKWA, J and RUDD, CD, 2009. Sustainable Technologies For Sustainable Cities
DING, S.-D., WANG, Y.-Z. and RUDD, C.D., 2009. Boron trifluoride-catalyzed degradation of poly-ɛ-caprolactone at ambient temperature Polymer Degradation and Stability. 94(9), 1515-1519 COZIEN-CAZUC, S., PARSONS, A.J., WALKER, G.S., JONES, I.A. and RUDD, C.D., 2008. Effects of aqueous aging on the mechanical properties of P40Na20Ca16Mg24 phosphate glass fibres Journal of Materials Science. 43(14), 4834-4839 NIAZI, M.I.K., AHMED, I., PARSONS, A.J., HABEB, R.R., FITZPATRICK, B., WALKER, G.S. and RUDD, C.D., 2008. Durability of Phosphate Glass Fibre/PLA Composites with different fibre treatments In: Duracosys2008.
JIANG, G, PICKERING, S J, WALKER, G S, WONG, K H and RUDD C D, 2008. Surface Characterisation of carbon fibre recycled using fluidized bed Applied Surface Science. 254, 2588-2593 RUDD, C.D., PARSONS, A.J. and WALKER, G.S., 2008. Degradable Composite WO2008035088 03/01/2008 00:00:00
AITCHISON, G A, WALKER, G S, JONES, I A and RUDD, C D, 2008. 31. Modeling changes in the modulus of poly-ε-caprolactone due to hydrolysis and plasticization Journal of Applied Polymer Science. 107, 3484-3490 AHMED, I., PARSONS, A.J., PALMER, G., KNOWLES, J.C. and RUDD, C.D., 2008. The Mechanical Properties of PCL and PLA Phosphate Glass Fibre Reinforced Composites In: World Biomaterials Congress.
PARSONS, A.J., BUTROUS, P., AHMED, I., SCOTCHFORD, C.A. and RUDD, C.D., 2008. Investigating the Degradation Rate of Novel Phosphate Glass, Under Different Temperatures and pH Levels In: World Biomaterials Congress.
AHMED, I., PARSONS, A.J., NAZHAT, S.N., RUDD, C.D. and KNOWLES, J.C., 2008. Comparison of Glasses in the Range xNa2O-(50-x)CaO-50P2O5 Made Using Different Precursors Glass Technology: The European Journal of Glass Science & Technology Part A. 49(2), 63-72
AHMED, I., PARSONS, A.J., NAZHAT, S.N., GUERRY, P., SMITH, M.E., KNOWLES, J.C. and RUDD, C.D., 2008. Comparison of Phosphate-Based Glasses in the Range 50P2O5 - (50-x)CaO - xNa2O Prepared Using Different Precursors The European Journal of Glass Science & Technology Part A.. 49(2), 63-72
BROOKS, R, KULANDAIVEL, P. P and RUDD, C. D., 2008. Skin Consolidation in Vacuum Moulded Thermoplastic Composite Sandwich Beams In: 8th International Conference on Sandwich Structures (ICSS8), Porto, Portugal. 627-637
AHMED, I., PARSONS, A.J., PALMER, G., KNOWLES, J.C., WALKER, G.S. and RUDD, C.D., 2008. Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre / PCL composite. Acta Biomaterialia. 4(5), 1307-1314 HARPER, L.T., TURNER, T.A., WARRIOR, N.A., DAHL, J.S. and RUDD, C.D., 2006. Characterisation of random carbon fibre composites from a directed fibre preforming process: analysis of microstructural parameters. Composites. Part A, Applied Science and Manufacturing. 37(11), 2136-2147 WONG, C.C., LONG, A.C., SHERBURN, M., ROBITAILLE, F., HARRISON, P. and RUDD, C.D., 2006. Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture Composites. Part A, Applied Science and Manufacturing. 37(6), 847-857 ENDRUWEIT, A., LONG, A.C., ROBITAILLE, F. and RUDD, C.D., 2006. Influence of stochastic fibre angle variations on the permeability of bi-directional textile fabrics Composites. Part A, Applied Science and Manufacturing. 37(1), 122-132 CORREIA, N.C., ROBITAILLE, F., LONG, A.C., RUDD, C.D., ŠIMÁČEK, P. and ADVANI, S.G., 2005. Analysis of the vacuum infusion moulding process: I. analytical formulation Composites. Part A, Applied Science and Manufacturing. 36(12), 1645-1656 JIANG, G., EVANS, M.E., JONES, I.A., RUDD, C.D., SCOTCHFORD, C.A. and WALKER, G.S., 2005. Preparation of poly(ε-caprolactone)/continuous bioglass fibre composite using monomer transfer moulding for bone implant Biomaterials. 26(15), 2281-2288 KULANDAIVEL,P., BROOKS,R., DUNMORE,M., RUDD,C. and MCNALLY,D., 2005. Processing and performance of thermoplastic composite sandwich beams for automotive applications. In: , ed., Materials and Processing Technologies for Revolutionary Applications: 37th International SAMPE Technical Conference, Seattle, Oct 31- Nov 3
CORREIA, N.C., ROBITAILLE, F., LONG, A.C., RUDD, C.D., ŠIMÁČEK, P. and ADVANI, S.G., 2004. Use of resin transfer molding simulation to predict flow, saturation, and compaction in the VARTM process Journal of Fluids Engineering. 126(2), 210-215 WARRIOR, N.A., TURNER, T.A., ROBITAILLE, F. and RUDD, C.D., 2004. The effect of interlaminar toughening strategies on the energy absorption of composite tubes Composites. Part A, Applied Science and Manufacturing. 35(4), 431-437 PARSONS, A.J., EVANS, M., RUDD, C.D. and SCOTCHFORD, C.A., 2004. Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell response Journal of Biomedical Materials Research. Part A. 71(2), 283-291 LESTER, E., KINGMAN, S., WONG, K.H., RUDD, C., PICKERING, S. and HILAL, N., 2004. Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study Materials Research Bulletin. 39(10), 1549-1556 HARRISON, P., CLIFFORD, M.J., LONG, A.C. and RUDD, C.D., 2004. A constituent-based predictive approach to modelling the rheology of viscous textile composites Composites. Part A, Applied Science and Manufacturing. 35(7-8), 915-931 PARSONS, A.J., BURLING, L.D., RUDD, C.D., SCOTCHFORD, C.A. and WALKER, G.S., 2004. The effect of production regime and crucible materials on the thermal properties of sodium phosphate Glasses Produced from Salts Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 71(1), 22-29 BROOKS, R., RUDD, C.D., SMITH, G. and HALLIDAY, I., 2004. Crashworthy automotive structures using thermoplastic composites (CRACTAC) - UK EPSRC/DTI/Industry funded Foresight Vehicle project SAE Transactions.
BROOKS,R., RUDD,C.D., SMITH,G. and HALLIDAY,I., 2004. Crashworthy automotive structures using thermoplastic composites (CRACTAC) – UK EPSRC/DTI/Industry funded Foresight Vehicle project In: Proceedings of the JSAE Annual Congress.
BROOKS, R., KULANDAIVEL, P. and RUDD, C.D., 2004. Vacuum moulding of thermoplastic composite sandwich beams In: Proc. 25th international SAMPE Europe Conference. 494-500
BROOKS, R., RUDD, C.D., SMITH, G. and HALLIDAY, I., 2004. Crashworthy automotive structures using thermoplastic composites (CRACTAC) - UK EPSRC/DTI/Industry Funded Foresight Vehicle Project In: 2004 Society of Automotive Engineers Japan (JSAE) Annual Congress.
ROBITAILLE, F., LONG, A.C., JONES, I.A. and RUDD, C.D., 2003. Automatically generated geometric descriptions of textile and composite unit cells Composites Part A: Applied Science and Manufacturing. 34(4), 303-312 LONG, A.C., CORREIA, N.C., RAGONDET, A., ROBITAILLE, F. and RUDD, C.D., 2003. Analytical and numerical modelling of vacuum infusion In: Proc. 24th SAMPE Europe International Conference. 313-320
HARRISON, P., LONG, A.C., CLIFFORD, M.J. and RUDD, C.D., 2003. Constitutive modelling of shear deformation for impregnated textile composites In: Proc. 6th International European Scientific Association for Material Forming (ESAFORM) Conference. 847-850
WARRIOR, N.A., TURNER, T.A., ROBITAILLE, F. and RUDD, C.D., 2003. Effect of resin properties and processing parameters on crash energy absorbing composite structures made by RTM Composites. Part A, Applied Science and Manufacturing. 34(6), 543-550 WIGGERS, J., LONG, A.C., HARRISON, P. and RUDD, C.D., 2003. The effects of stitch architecture on the shear compliance of non-crimp fabrics In: Proc. 6th International European Scientific Association for Material Forming (ESAFORM) Conference. 851-854
SANTULLI, C., BROOKS, R., LONG, A.C., WARRIOR, N.A. and RUDD, C.D., 2002. Impact properties of compression moulded commingled E-glass-polypropylene composites Plastics, Rubber & Composites. 31(6), 270-277 SANTULLI, C., BROOKS, R., RUDD, C.D. and LONG, A.C., 2002. Influence of microstructural voids on the mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials, Design and Applications. 216(2), 85-100 YIP, H.L.H., PICKERING, S.J. and RUDD, C.D., 2002. Characterisation of carbon fibres recycled from scrap composites using fluidised bed process Plastics, Rubber and Composites. 31(6), 278-282 ROBITAILLE, F., LONG, A.C. and RUDD, C.D., 2002. Permeability prediction for industrial preforms Plastics, Rubber & Composites: the Polymer Journal of the Institute of Materials. 31(6), 238-248 GOUGH, J.E., CHRISTIAN, P., SCOTCHFORD, C.A., RUDD, C.D. and JONES, I.A., 2002. Synthesis, degradation,and in vitro cell responses of sodium phosphate glasses for craniofacial bone repair Journal of Biomedical Materials Research. 59(3), 481-489 LONG, A.C., SOUTER, B.J., ROBITAILLE, F. and RUDD, C.D., 2002. Effects of fibre architecture on reinforcement fabric deformation Plastics, Rubber & Composites: the polymer journal of the Institute of Materials. 31(2), 87-97 RUDD, C.D., BROOKS, R., LONG, A.C., WARRIOR, N.A., WILSON, M.J. and SANTULLI, C., 2002. Development of a crashworthy side intrusion beam using long glass fibre reinforced polypropylene for the Foresight Vehicle Programme In: Future Car Congress 2002.
RUDD,C.D., BROOKS,R., LONG,A.C., WARRIOR,N.A., WILSON,M.J. and SANTULLI,C., 2002. Development of a Crashworthy Composite Side Intrusion Beam using Long Glass Fibre Reinforced Polypropylene In: Proceedings of the Future Car Congress.
RUDD, C.D., BROOKS, R., LONG, A.C., WARRIOR, N.A., WILSON, M.J. and SANTULLI, C., 2002. Development of a Crashworthy Composite Side Intrusion Beam using Long Glass Fibre Reinforced Polypropylene In: Proc Future Car Congress.
RAGONDET, A., CORREIA, N.C., ROBITAILLE, F., LONG, A.C. and RUDD, C.D., 2002. Experimental investigation on vacuum infusion process In: Proc. 9th Int. Conf. on Fibre Reinforced Composites. 437-445
RAGONDET, A., CORREIA, N.C., ROBITAILLE, F., LONG, A.C. and RUDD, C.D., 2002. Experimental investigation and modelling of the vacuum infusion process In: Proc. 10th European Conference on Composite Materials (ECCM-10).
RUDD, C.D., BROOKS, R., LONG, A.C., WARRIOR, N.A. and WILSON, M.J., 2002. Analysis and performance of a glass-polypropylene side intrusion protection beam In: Proc. 23rd international SAMPE Europe Conference. 59-70
TURNER, T.A., ROBITAILLE, F., WARRIOR, N.A., RUDD, C.D. and COOPER, E.J., 2002. Effect of resin formulation on crash energy absorbing composite structures made by RTM Plastics, Rubber & Composites: Macromolecular Engineering. 31(2), 49-57 ROBITAILLE, F., LONG, A.C., JONES, I.A., CROOKSTON, J.J. and RUDD, C.D., 2002. Automated generation of tow envelopes and inter-tow volumes for composite unit cell modelling In: Proceedings of the 6th International Conference on Textile Composites (TexComp 6).
SUTCLIFFE, M.P., SHARMA, S.B., LONG, A.C., CLIFFORD, M.J., GIL, R.G., HARRISON, P. and RUDD, C.D., 2002. A comparison of simulation approaches for forming of textile composites In: Proc. 5th Int. European Scientific Association for Material Forming (ESAFORM) Conference. 311-314
WARRIOR, N.A., TURNER, T.A., ROBITAILLE, F. and RUDD, C.D., 2002. Effect of interlaminar toughening on energy absorption of composite structures, proceedings of the tenth US- In: Japan Conference on Composite Materials.
HARRISON, P., CLIFFORD, M.J., LONG, A.C. and RUDD, C.D., 2002. Constitutive modelling of impregnated continuous fibre reinforced composites Micromechanical approach Plastics, Rubber & Composites: Macromolecular Engineering. 31(2), 76-86 HARRISON, P., CLIFFORD, M.J., LONG, A.C. and RUDD, C.D., 2002. A micro-mechanical approach to stress prediction during shear for woven continuous fibre reinforced impregnated composites In: Proc. 5th Int. European Scientific Association for Material Forming (ESAFORM) Conference. 275-278
PARSONS, A.J., BURLING, L.D., RUDD, C.D., WALKER, G.S. and SCOTCHFORD, C.A., 2002. Effect of cations on the properties of phosphate glasses for the reinforcement of degradable biomedical polymers In: Trans. 17th Conference of the European Society for Biomaterials.
ROBITAILLE, F., LONG, A.C. and RUDD, C.D., 2002. Geometric modelling of textiles for prediction of composite processing and performance characteristics Plastics, Rubber & Composites: Macromolecular Engineering. 31(2), 66-75 RUDD, C.D., 2002. Special issue: University of Nottingham - Editorial Plastics, Rubber & Composites: Macromolecular Engineering. 31(2), 47-47
RUDD, C.D., 2002. Plastics, Rubber and Composites: Editorial Plastics, Rubber and Composites Processing and Applications. 31(2), 47
WARRIOR, N.A., WILSON, M.J., BROOKS, R. and RUDD, C.D., 2001. Modelling of glass reinforced thermoplastic composite side-impact structures International Journal of Crashworthiness. 6(4), 553-559 LONG, A.C., WILKS, C.E. and RUDD, C.D., 2001. Experimental characterisation of the consolidation of a commingled glass/polypropylene composite Composites Science and Technology. 61(11), 1591-1603 WARRIOR, N.A., RUDD, C.D., BROOKS, R., LONG, A.C., WILSON, M.J. and SANTULLI, C., 2001. Development of a thermoplastic composite side intrusion beam In: Proceedings of the 4th International Conference for Lean Weight Vehicles 4.
CHRISTIAN, P., JONES, I.A., RUDD, C.D., CAMPBELL, R.I. and CORDEN, T.J., 2001. Monomer transfer moulding and rapid prototyping methods for fibre reinforced thermoplastics for medical applications Composites. Part A, Applied Science and Manufacturing. 32(7), 969-976 WARRIOR, N.A., RUDD, C.D., BROOKS, R., LONG, A.C., WILSON, M.J. and SANTULLI, C., 2001. Development of a thermoplastic composite side intrusion beam In: Proceedings of the 4th International Conference for Lean Weight Vehicles 4.
WAKEMAN, M.D., RUDD, C.D., CAIN, T.A., BROOKS, R. and LONG, A.C., 2000. Compression moulding of glass and polypropylene composites for optimised macro- and micro-mechanical properties. 4: Technology demonstrator - a door cassette structure Composites Science and Technology. 60(10), 1901-1918 SANTULLI, C., BROOKS, R., LONG, A.C., RUDD, C.D., WILSON, M.J. and WARRIOR, N.A., 2000. Impact properties of thermoplastic laminates for automotive applications In: Proceedings of ACP 2000. 43-52
PICKERING, S.J., KELLY, R.M., KENNERLEY, J.R., RUDD, C.D. and FENWICK, N.J., 2000. A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites Composites Science and Technology. 60(4), 509-523 RUDD, C.D., 2000. Prediction of preform permeability of geometrically modeled woven fabrics In: 15th Annual Conference of the American Society for Composites (ASC).
RUDD, C.D., 2000. Osteoblast responses to potassium fluoride treated PCL for craniofacial bone repair In: 6th World Biomaterials Congress.
RUDD, C.D., 2000. The synthesis and controlled degradation of poly-e-caprolactone using a boron trifluoride catalyst system In: 6th World Biomaterials Congress.
RUDD, C.D., 2000. Permeability modelling of industrial preforms: simulations and practical aspects In: 9th ECCM Conference.
WAKEMAN, M.D., CAIN, T.A., RUDD, C.D., BROOKS, R. and LONG, A.C., 1999. Compression moulding of glass and polypropylene composites for optimised macro- and micro- mechanical properties 3. Sandwich structures of GMTS and commingled fabrics Composites Science and Technology. VOL 59(NUMBER 8), 1153-1167 WAKEMAN, M.D., CAIN, T.A., RUDD, C.D., BROOKS, R. and LONG, A.C., 1999. Compression moulding of glass and polypropylene composites for optimised macro-and micro-mechanical properties II. Glass-mat-reinforced thermoplastics Composites Science and Technology. 59(5), 709-726 ROBITAILLE, F., CLAYTON, B.R., LONG, A.C., SOUTER, B.J. and RUDD, C.D., 1999. Geometric modelling of industrial preforms: woven and braided textiles Proceedings of the Institution of Mechanical Engineers. Part L, Journal of materials, design and applications. 213(2), 69-83 RUDD, C.D., 1999. Fibre composites for lightweight vehicle structures - cost effective manufacture In: IoM Materials for Lean Weight Vehicle Conference.
RUDD, C.D., 1999. Current trends in lightweight vehicle manufacture In: IoM ICAC'99. 165-178
RUDD, C.D., 1999. The influence of fabric mechanics on draping In: ICAC'99. 55-62
RUDD, C.D., 1999. Applications of fiber architecture modelling for engineered preforms In: 1st SAMPE/ACCE/DOE Conference on Automotive Composites. 33-41
RUDD, C.D., 1999. Novel manufacturing methods for fibre reinforced thermoplastics for medical applications In: IoM ICAC'99'. 255-262
RUDD, C.D., 1999. Rate dependency during processing of aligned fibre glass/thermoplastic composites In: 12th ICCM.
RUDD, C.D., 1999. Tool/ply friction and consolidation during processing of glass/thermoplastic composites In: IoM ICAC'99. 179-186
RUDD, C.D., 1999. Effects of fibre architecture on deformation during preform manufacture In: 12th ICCM Conference.
WAKEMAN, M.D., CAIN, T.A., RUDD, C.D., BROOKS, R. and LONG, A.C., 1998. Compression moulding of glass and polypropylene composites for optimised macro- and micro-mechanical properties - 1. Commingled glass and polypropylene Composites Science and Technology. 58(12), 1879-1898 WAKEMAN, M.D., CAIN, T.A., RUDD, C.D., BROOKS, R. and LONG, A.C., 1998. Compression moulding of a novel door cassette using sandwiches of GMTs and commingled fabrics In: 7th International Conference on Fibre Reinforced Composites. 183-191
RUDD, C.D., LONG, A.C., BROOKS, R., WAKEMAN, M.D., PRICE, C.B. and CAIN, T.A., 1998. Design for manufacture applied to a hybrid door module using GMTs and commingled fabric In: ACCE Conference.
KENNERLEY, J.R., KELLY, R.M., FENWICK, N.J., PICKERING, S.J. and RUDD, C.D., 1998. The characterisation and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process Composites. Part A, Applied Science and Manufacturing. 29(7), 839-846 LONG, A.C., BLANCHARD, P.J., RUDD, C.D. and SMITH, P., 1998. The development of an integrated process model for liquid composite moulding Composites. Part A, Applied Science and Manufacturing. 29(7), 847-854 RUDD, C.D., 1998. Design for manufacture applied to a hybrid door module using GMTs and co-mingled fabric In: ASM/ESD Advanced Composites Conference and Exposition.
RUDD, C.D., 1998. Compression moulding of a novel door cassette using sandwiches of GMTs and co-mingled fabrics In: 7th International Conference on Fibre Reinforced Composites. 183-192
RUDD, C.D., 1998. A predictive model for drape and flow analysis of industrial textile preforms In: 2nd ICAC Conference. 251-260
RUDD, C.D., 1998. Processes and properties of new thermoplastic composites for automotive use In: 9th SICOMP - Conference on Manufacturing and Design of Composites.
RUDD, C.D., 1998. Geometric description of woven and warp-knitted industrial reinforcements for the calculation of preform deformation and flow properties In: 1998 Automotive Composites Workshop. 35-43
RUDD, C.D., 1998. The measurement of in-plane permeability for sheared preforms In: 6th CADCOMP Conference. 495-504
RUDD, C.D., 1998. A geometrical model for textile preforms In: 19th International Conference AMPE. 151-162
KENNERLEY, J.R., FENWICK, N.J., PICKERING, S.J. and RUDD, C.D., 1997. The properties of glass fibers recycled from the thermal processing of scrap thermoset composites Journal of Vinyl and Additive Technology. VOL 3(NUMBER 1), 58-63 RUDD, C.D., 1997. Experimental analysis of fabric deformation mechanisms during preform manufacture In: International Conference on Composite Materials (ICCM11).
RUDD, C.D., 1997. Permeability measurements and modelling techniques for vaccum infusion In: ICAC'97. 231-242
RUDD, C.D., 1997. Modelling the effect of processing and geometry on the consolidation of co-mingled glass and polypropylene In: 12th ASM/ESD Advanced Composites Conference. 611-622
RUDD, C.D., 1997. Statistical study of environmental degradation in resin transfer moulded structural composites In: ICAC'97. 855-866
RUDD, C.D., 1997. Combined drape and flow modelling for liquid composite moulding In: IoM International Conference on Automated Composites (ICAC '97). 51-58
RUDD, C.D., 1997. Textile reinforcement for automotive composites In: World Textile Congress.
RUDD, C.D., 1997. The behaviour of core materials during resin transfer moulding of sandwich structures In: ICAC'97. 365-372
RUDD, C.D., 1997. Recycling glass fibres from scrap composites using a fluidised bed process In: 12th ASM/ESD Advanced Composites Conference. 81-92
RUDD, C.D., 1997. The influence of microwave resin preheating on the quality of RTM laminates In: International Conference on Composite Materials (ICCM11).
RUDD, C.D., 1997. Computer integrated design and manufacture of structural preforms In: ICAC'97. 245-252
RUDD, C.D., 1997. On the application of embroidery techniques to the production of high performance preforms for composite laminates In: IoM International Conference on Automated Composites (ICAC'97). 123-130
RUDD, C.D., 1997. Thermoplastic stamping of structural composites: a preliminary assessment In: ICAC'97. 61-74
RUDD, C.D., 1997. Modelling the effect of reinforcement deformation on the filling phase during liquid composite moulding In: ASM/ESD Advanced Composites Conference. 205-212
RUDD, C.D., 1997. Intelligent processing techniques for RTM In: ICAC'97. 41-42
RUDD, C.D., 1997. Towards high speed, low investment liquid moulding In: ASM/ESD Advanced Composites Conference.
LONG, A.C., RUDD, C.D., BLAGDON, M., KENDALL, K.N. and DEMERI, M.Y., 1996. Simulation and measurement of reinforcement deformation during preform manufacture Polymers and Polymer Composites. VOL 4(NUMBER 5), 335-342
LONG, A.C., RUDD, C.D., BLAGDON, M. and SMITH, P., 1996. Characterizing the processing and performance of aligned reinforcements during preform manufacture Composites. Part A, Applied Science and Manufacturing. 27(4), 247-254 RUDD, C.D., 1996. Liquid composite moulding - science vs technology In: 7th European Conference on Composite Materials (ECCM7).
RUDD, C.D., 1996. Analysis of an anisotropic prototype composite wheel-hub In: XXV AIAS International Conference on Material Engineering. 519-528
KENNERLEY, J.R, FENWICK, N.J., PICKERING, S.J. and RUDD, C.D., 1996. The properties of glass fibres recycled from the thermal processing of scrap thermoset composites In: ANTEC '96. 890-894
RUDD, C.D., 1996. Recent developments in liquid moulding and related issues In: Institue of Materials Residential Meeting on Manufacturing Polymer Composites - Making the Science Work.
RUDD, C.D., 1996. Flow and compaction during the isothermal consolidation of a co-mingled thermoplastic composite In: 4th International Conference On Flow Processes in Composite Materials Conference.
BLANCHARD, P.J. and RUDD, C.D., 1996. Cycle time reduction in resin transfer moulding by phased catalyst injection Composites Science and Technology. 56(2), 123-133 RUDD, C.D., 1996. Compression moulding of woven yarns of co-mingled glass and polypropylene for use in high volume structural automotive applications In: World Textiles Congress on Polypropylene in Textiles. 265-274
RUDD, C.D., 1996. Liquid composite moulding - simulation and design In: Royal Aeronautical Society Conference on Virtual Manufacturing.
CHICK, J.P., RUDD, C.D., VAN LEEUWEN, P.A. and FRENAY, T.I., 1996. Material characterization for flow modeling in structural reaction injection molding Polymer Composites. 17(1), 124-135 RUDD, C.D., 1996. Cycle time reductions in RTM based upon resin preheating and phased initiators In: 7th European Conference on Composite Materials (ECCM7). 291-297
JOHNSON, M.S., RUDD, C.D. and HILL, D.J., 1995. Cycle time reductions in resin transfer moulding using microwave preheating Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 209(6), 443