JIA , YUDAN and STACE, ROD, 2012. Numerical Modelling of the Shaft Linings at Boulby Potash Mine In: 3rd Int. Conf. on Shaft Design – IOM3, London April 2012.
MOHD YUNUS, N Z, WANATOWSKI, D and STACE, R, 2012. Effectiveness of lime stabilisation in organic clay In: TC 211 International Symposium on Ground Improvement IS-GI Brussels. (In Press.)
2011. Soft Rock Ground Control. In: SME Mining Engineering Handbook Third Edition. Society for Mining, Metallurgy, and Exploration, Inc. USA. pp595 - 610
MOHD YOUNUS, N Z, STACE, L R and WANATOWSKI, D, 2011. Effect of Humic Acid on Physical and Engineering Properties of Lime-Treated Organic Clay World Academy of Science, Engineering and Technology. 59,
V.F. NAVARRO TORRES, C. DINIS DA GAMA, M.M. COSTA E SILVA, RAGHU SINGH, REDDISH D J and STACE L R, 2011. Application of a new convergence measurement technique for the rehabilitation of old Rossio railway tunnel, Lisbon Geomechanics and Geoengineering. Vol 6(No 2),
R. N. SINGH, R. STACE, A. G. PATHAN, F. DOULATI ARDEJANI and A S ATKINS, 2010. Hydrogeological assessment of the Thar lignite Prospect In: IMWA Symposium 2010, Sydney, NS Canada.
VIDAL F. NAVARRO TORRES, CARLOS DINIS DA GAMA, ANTÓNIO D. PINTO, DAVID J. REDDISH, ROD STACE and RAGHU, N. SINGH, 2009. A mathematical model to assess an environmental sustainability index for the underground coal gasification process In: 4th International Conference on Underground Coal Gasification, London, 09.
YARDLEY, E.D. and STACE, L.R., 2008. Belt Conveying of Minerals Woodhead Publishing.
VANICHKOBCHINDA, P, REDDISH, D. J., STACE, L. R. and WHITTLES, D.N., 2007. Numerical Simulation of the Dynamic Breakage Testing of Sandstone: Part 1:Development of Homogeneous constitutive Model for the Fragmentation Analysis in Sandstone International journal of Materials and Structural Reliability. vol 5(No 1), 29-44
REDDISH, D.J., STACE, L.R., VANICHKOBCHINDA, P. and WHITTLES, D.N., 2005. Numerical simulation of the dynamic impact breakage testing of rock International Journal of Rock Mechanics and Mining Sciences. 42(2), 167-176 LU, Z., REDDISH, D.J. and STACE, L.R., 2005. Uncertainty analysis in a numerical modelling context - an example application on a coal mine roadway design Transactions of the Institution of Mining and Metallurgy. Section A, Mining technology.. 114(4), 232-240 SALEH, S.Y., REDDISH, D.J. and STACE, L.R., 2005. The potential sensitivity of the grout/rock interface roughness on the performance of the rockbolt system In: 11th International conference of IACMAG.
YARDLEY, E.D., WILLIAMS, M., WYMARK, S. and STACE, L.R., 2004. Development of a small-scale fire propagation test for conveyor belts Transactions of the Institution of Mining and Metallurgy. Section A, Mining Industry. 113(2), 73-82 SALEH, S.Y., REDDISH, D.J., STACE, L.R. and WHITTLES, D.N., 2004. Investigating the interaction between pre-stressed cable bolts and the rock mass using numerical modelling techniques In: Aachen International Mining Symposia. 241-258
REDDISH, D., STACE, L., BOOTH, D. and WHITTLES, D.N., 2004. An investigation into the effectiveness of support systems combining steel supports and rock bolts within coal mine roadways In: 23rd International Conference on Ground Control in Mining. 278-285
LU, Z., REDDISH, D.J. and STACE, L.R., 2004. Addressing uncertainty for a coal mine tunnel design based on numerical modelling In: 5th International Symposium on Mining Science and Technology.
REDDISH, D.J., STACE, L.R. and WHITTLES, D.N., 2003. Prediction of gas flows around Longwall Coal Mine panels using numerical modelling techniques In: 3rd International Symposium High Performance Mine Production. 411-428
REDDISH, D., STACE, L. and WHITTLES, D.N., 2003. Numerical modelling of longwall panels as an aid to mine layout design In: CIM Mining Industry Conference and Exhibition.
REDDISH, D.J., STACE, L.R. and WHITTLES, D.N., 2003. A model mine the use of numerical modelling as an aid to coal mine layout design World Coal. AUG, 49-53
HEDLEY, D.A. and STACE, L.R., 2002. Profit and safety-the pressures on the manufacturer International Mining and Minerals. 2, 7-14
REDDISH, D.J., WHITTLES, D.N. and STACE, L., 2000. The application of rock mass classification principles to coal mine design in UK conditions In: 19th Conference on ground control in mining.
MOHAMMAD, N., REDDISH, D. J. and STACE, L. R., 1997. The relation between in situ and laboratory rock properties used in numerical modelling INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES AND GEOMECHANICS ABSTRACTS. VOL 34(NUMBER 2), 289-298