GLASS J, ACHOUR N, PARRY T and NICHOLSON N, 2012. Engaging small firms in sustainable supply chains: responsible sourcing practices in the Uk construction industry International Journal of Agile Systems and Management. 5(1), 29-58
LATASTE J-F, BARNETT SJ, PARRY T and SOUSTOS MN, 2011. Study of fibre orientation and distribution in UHPFRC by electrical resistivity and mechanical tests European Journal of Environmental and Civil Engineering. 15(4), 533-544 BYRNE M, ISOLA R and PARRY T, 2011. A generalised approach to outlier identification in pavement condition data International Journal of Pavement Engineering. BARNETT SJ, LATASTE J-F, PARRY A, MILLARD SG and SOUSTOS MN, 2010. Assessment of fibre orientation in uktra high performance fibre reinforced concrete and its effect on flexural strength Materials and Structures. 43(8), 1009-1023
ROBINSON JP, PARRY AR, GRENFELL JRA and GHAZIREH N, 2010. Microwave vitrification for lightweight aggregate manufacture Proceedings of the Institution of Civil Engineers, Construction Materials. 163(CM3), 167-174 BROWN, J, PARRY, T and MOON, J, 2009. Corporate Responsibility Reporting In Uk Construction Proceedings Of The Institution Of Civil Engineers-Engineering Sustainability. 162(4), 193-205 AIREY, G.D, MOHAMMED, M.H, COLLOP, A.C, PARRY, A. and HAYES, C. J., 2008. Linear viscoelastic behaviour of polyacrylate binders and bitumen blends Journal of Road Materials and Pavement Design: Special Issue EATA 08. 9, 13-35 KIANI, M, PARRY, T and CENEY, H, 2008. Environmental Life-Cycle Assessment Of Railway Track Beds Proceedings Of The Institution Of Civil Engineers-Engineering Sustainability. 161(2), 135-142 MOHAMMED, M.H, AIREY, G.D, COLLOP, A.C, HAYES, C and PARRY, T., 2007. Synthesis of asphalt binders from renewable resources and their rheological properties In: Sustainable Construction Materials and Technologies.
CARDER, D. R., HAWKER, L. and PARRY, A. R., 2007. Motorway noise barriers as solar power generators PROCEEDINGS- INSTITUTION OF CIVIL ENGINEERS ENGINEERING SUSTAINABILITY. VOL 160(ISSU 1), 17-26 KIANI, M, PARRY, T and CENEY, H., 2007. Comparative LCA study of railway track beds In: International conference on sustainability in the cement and concrete industry. Lillehammer, Norway, September 2007.. (In Press.)
MORGAN, P. and PARRY, T., 2006. SILVIA's proposal for specifying low-noise road surfaces in Europe. Asphalt Professional. 13-17
PARRY, A.R. and VINER, H.E., 2005. Accidents and the skidding resistance standard for strategic roads in England Wokingham: TRL Limited. (1846086213)
VINER, H., SINHAL, R. and PARRY, A.R., 2005. Review of United Kingdom Skid Resistance Policy Routes: Roads. 326, 66-77
PARRY, A.R., 2005. A model set of asphalt sustainability indicators Wokingham: TRL Limited. (184608637x)
VINER, H., GREENE, M. and PARRY, T., 2005. Managing skidding resistance - a review of the strategy for UK trunk roads. In: , ed., TRL Annual Research Review 2004 Berkshire: Transport Research Laboratory. 27-35
PARRY, T., 2004. Briefing: Development of asphalt and concrete products incorporating alternative aggregates Institution of Civil Engineers. Proceedings. Civil Engineering. 157, 111-112
VINER, H., SINHAL, R. and PARRY, A.R., 2004. Review of UK skid resistance policy In: 5th Symposium of Pavement Surface Characteristics.
PARRY, A.R. and VINER, H., 2003. Developing a new skid resistance policy Asphalt Professional. No. 2 April 2003,
GOTHIE, M., PARRY, A.R. and ROE, P., 2002. The relative influence of the parameters affecting road surface friction In: FISITA 2002.
PARRY, A.R., BLACKMAN, D. and MERRILL, D., 2001. Measurements of truck tyre contact stresses and pavement wear In: International Rubber Conference.
GOTHIE, M., PARRY, A.R. and ROE, P., 2001. The relative influence of the factors affecting road surface friction In: 2nd International Colloquium on Vehicle Tyre Road Interaction.
PARRY, A.R., ROE, P. and GOTHIE, M., 2001. Implications for road surface guidelines In: 2nd International Colloquium on Vehicle Tyre Road Interaction.
FERNE, B., VINER, H., RAMDAS, V. and PARRY, A.R., 2001. Development of management indicators for the English trunk road network. In: , ed., Transport Research Laboratory Annual Research Review 2000 Berkshire: Transport Research Laboratory. 43-52
MCKEOWN, A., PARRY, A.R., FERNE, B.W., WILLETT, M.R. and MERCER, J., 2000. Improving the longitudinal profile and evenness of asphalt pavements In: Pavement Surface Characteristics. 33
PARRY, A.R. and ROE, P., 2000. The next generation of low noise asphalt road surfaces In: inter.noise 2000. 4023
VINER, H.E., ROE, P.G., PARRY, A.R. and SINHAL, R., 2000. High and low-speed skidding resistance: the influence of texture on smooth and ribbed tyre friction In: Pavement Surface Characteristics. 227
PARRY, A.R. and WOOD, S., 2000. Sustainable construction and the issues for transport infrastructure Journal of the Institution of Highways and Transportation. 47(12),
MANCOSU, F., PARRY, A.R. and LA TORRE, F., 2000. Friction variation due to speed and water depth In: Pavement Surface Characteristics. 249
PHILLIPS, S.M., PARRY, A.R. and FERNE, B.W., 1999. Monitoring the safety and environmental performance of road surfaces In: PIARC World Congress.
ROE, P.G., PARRY, A.R. and VINER, H.E., 1998. High and low speed skidding resistance: The influence of texture depth TRL Ltd, Wokingham, UK.
PARRY, A.R., 1997. UK Design of flexible composite pavements In: Eight International conference on Asphalt Pavements. 17-24
PARRY, A.R., PHILLIPS, S.J., POTTER, J.F. and NUNN, M.E., 1990. Design and performance of flexible composite road pavements Institution of Civil Engineers. Proceedings. Civil Engineering. 135, 9-16
BROOKES, C.A. and PARRY, A.R., 1988. Some Fundamental-Aspects of the Mechanical Wear of Hard Ceramic Crystals due to Sliding Materials Science and Engineering A: Structural Materials: Properties,Microstructures and Processing. 143-150