PARSONS, A. J., GONCIARUK, A., ZENG, X., THOMANN, F. S., SCHUBEL, P., LORRILLARD, J. and JOHNSON, M. S., 2022. Controlling mass loss from RTM6 epoxy resin under simulated vacuum infusion conditions Polymer Testing. 107, TAN, C., RUDD, C. D., PARSONS, A. J., SHARMIN, N. and AHMED, I., 2022. L-DOPA coating improved phosphate glass fibre strength and fibre/matrix interface: Journal of the Mechanical Behavior of Biomedical Materials Journal of the Mechanical Behavior of Biomedical Materials. 136, TAN, C., RUDD, C. D., PARSONS, A. J., SHARMIN, N. and AHMED, I., 2022. L-DOPA coating improved phosphate glass fibre strength and fibre/matrix interface: Journal of the Mechanical Behavior of Biomedical Materials Journal of the Mechanical Behavior of Biomedical Materials. 136, WANG, Y., FU, J., LIU, J., PARSONS, A., AHMED, I., RUDD, C. and SHARMIN, N., 2020. Processing and characterization of phosphate glass fiber/polylactic acid commingled yarn composites for commercial production: Journal of Biomedical Materials Research - Part B Applied Biomaterials Journal of Biomedical Materials Research - Part B Applied Biomaterials. ISLAM, M. T., SHARMIN, N., RANCE, G. A., TITMAN, J. J., PARSONS, A. J., HOSSAIN, K. M. Z. and AHMED, I., 2019. The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses: Journal of Biomedical Materials Research - Part B Applied Biomaterials Journal of Biomedical Materials Research - Part B Applied Biomaterials. WANG, Y., LIU, X., ZHU, C., PARSONS, A., LIU, J., HUANG, S., AHMED, I., RUDD, C. and SHARMIN, N., 2019. Production and characterisation of novel phosphate glass fibre yarns, textiles, and textile composites for biomedical applications: Journal of the Mechanical Behavior of Biomedical Materials Journal of the Mechanical Behavior of Biomedical Materials. 99, 47-55 ANDREW J. PARSONS, REDA M. FELFEL, MATTHEW D. WADGE and DAVID M. GRANT, 2019. Improved phosphate‐based glass fiber performance achieved through acid etch/polydopamine treatment International Journal of Applied Glass Science. WANG, Y., ZHU, C., PARSONS, A., RUDD, C., AHMED, I. and SHARMIN, N., 2019. Effects of ZnO addition on thermal properties, degradation and biocompatibility of P45Mg24Ca16Na(15-x)Znx glasses: Biomedical Glasses Biomedical Glasses. 5(1), 53-66 KABIR, S. F., ADLINGTON, K., PARSONS, A. J., AHMED, I. and IRVINE, D. J., 2019. Comparison of thermal, thermomechanical, and rheological properties of blends of divinylbenzene-based hyperbranched and linear functionalized polymers: Journal of Applied Polymer Science Journal of Applied Polymer Science. ŁAPA, A., CRESSWELL, M., CAMPBELL, I., JACKSON, P., GOLDMANN, W. H., DETSCH, R., PARSONS, A., AHMED, I. and BOCCACCINI, A. R., 2019. Correction: Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications (Journal of Materials Chemistry B (2019) DOI: 10.1039/c9tb00820a): Journal of Materials Chemistry B Journal of Materials Chemistry B. 7(45), 7246 SHARMIN, N., HASAN, M. S., ISLAM, M. T., PANG, C., GU, F., PARSONS, A. J. and AHMED, I., 2019. Effect of dissolution rate and subsequent ion release on cytocompatibility properties of borophosphate glasses: Biomedical Glasses Biomedical Glasses. 5(1), 85-97 TAN, C., RUDD, C., PARSONS, A., SHARMIN, N., ZHANG, J., CHEN, W. and AHMED, I., 2018. Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites: Fibers Fibers. 6(4), ZHU, C., AHMED, I., PARSONS, A., LIU, J. and LIU, X., 2018. The mechanical property, degradation and cytocompatibility analysis of novel phosphate glass fiber textiles: Textile Research Journal Textile Research Journal. TAN, C., AHMED, I., PARSONS, A. J., SHARMIN, N., ZHU, C., LIU, J., RUDD, C. D. and LIU, X., 2017. Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition: Journal of Materials Science Journal of Materials Science. 1-14 ZHU, C., AHMED, I., PARSONS, A., HOSSAIN, K. Z., RUDD, C., LIU, J. and LIU, X., 2017. Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses: Journal of Non-Crystalline Solids Journal of Non-Crystalline Solids. 457, 77-85 SHARMIN, N., HASAN, M.S., RUDD, C.D., BOYD, D., WERNER-ZWANZIGER, U., AHMED, I. and PARSONS, A.J., 2017. Effect of boron oxide addition on the viscosity-temperature behaviour and structure of phosphate-based glasses Journal of Biomedical Materials Research - Part B Applied Biomaterials. 105(4), 764-777 MUÑOZ-SENOVILLA, L., MUÑOZ, F., TRICOT, G., AHMED, I. and PARSONS, A.J., 2017. Structure–properties relationships in fibre drawing of bioactive phosphate glasses Journal of Materials Science. 1-13 CHEN, M., LU, J., FELFEL, R. M., PARSONS, A. J., IRVINE, D. J., RUDD, C. D. and AHMED, I., 2017. Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: In-situ polymerisation versus laminate stacking: Composites Science and Technology Composites Science and Technology. 150, 1-15 CHEN, M., LU, J., FELFEL, R.M., PARSONS, A.J., IRVINE, D.J., RUDD, C.D. and AHMED, I., 2017. Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: In-situ polymerisation versus laminate stacking Composites Science and Technology. 150, 1-15 TOMCZYNSKA, M. M., WARD, M., CHOONG, G. Y. H., WALTON, K., DE FOCATIIS, D. S. A., GRANT, D. M., IRVINE, D. J. and PARSONS, A. J., 2017. Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants ZHU, C., AHMED, I., PARSONS, A., WANG, Y., TAN, C., LIU, J., RUDD, C. and LIU, X., 2017. Novel bioresorbable phosphate glass fiber textile composites for medical applications: Polymer Composites Polymer Composites. TAN, C., AHMED, I., PARSONS, A. J., ZHU, C., ZHANG, J., RUDD, C. D. and LIU, X., 2017. Investigating the use of chitosan as a coupling agent to improve the interfacial properties of phosphate glass fibre/polycaprolactone composites ZHU, C., AHMED, I., PARSONS, A. J., WANG, Y., TAN, C., LIU, J., RUDD, C. D. and LIU, X., 2017. Novel bioresorbable textile composites for medical applications SHARMIN, N., RUDD, C.D., PARSONS, A.J., AHMED, I., 2016. Structure, viscosity and fibre drawing properties of phosphate-based glasses: effect of boron and iron oxide addition Journal of Materials Science. 51(16), 7523-7535 SHARMIN, N., HASAN, M.S., PARSONS, A.J., RUDD, C.D., AHMED, I., 2016. Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites Journal of the Mechanical Behavior of Biomedical Materials. 59, 41-56 CHEN, M., PARSONS, A.J., FELFEL, R.M., RUDD, C.D., IRVINE, D.J., AHMED, I., 2016. In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties Journal of the Mechanical Behavior of Biomedical Materials. 59, 78-89 CHAKLADAR, N.D., HARPER, L.T., PARSONS, A.J., 2016. Optimisation of composite bone plates for ulnar transverse fractures Journal of the Mechanical Behavior of Biomedical Materials. 57, 334-346 SHAHARUDDIN, S.I.S., AHMED, I., FURNISS, D., PARSONS, A.J., RUDD, C.D., 2016. Investigation on the thermal properties, density and degradation of quaternary iron and titanium phosphate based glasses In: IOP Conference Series: Materials Science and Engineering. 114. 012124 CHOONG, GABRIEL Y. H., PARSONS, ANDREW J., GRANT, DAVID M. and DE FOCATIIS, DAVIDE S. A., 2015. Rheological Techniques for Determining Degradation of Poly lactic Acid in Bioresorbable Medical Polymer Systems PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY. 1664, FELFEL, R.M., HOSSAIN, K.M.Z., PARSONS, A.J., RUDD, C.D., AHMED, I., 2015. Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites Journal of Materials Science. 50(11), 3942-3955 PARSONS, A.J., SHARMIN, N., SHAHARUDDIN, S.I.S., MARSHALL, M., 2015. Viscosity profiles of phosphate glasses through combined quasi-static and bob-in-cup methods Journal of Non-Crystalline Solids. 408, 76-86 LIU, X., GRANT, D.M., PALMER, G., PARSONS, A.J., RUDD, C.D., AHMED, I., 2015. Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites Journal of Biomedical Materials Research - Part B Applied Biomaterials. 103(7), 1424-1432 S.I.S. SHAHARUDDIN, I. AHMED, D. FURNISS, A.J. PARSONS and C.D. RUDD, 2015. The Glass Transition Temperature of Iron and Titanium Containing Phosphate Based Glasses Advanced Materials Research Vol. 1115 (July 2015) pp 178-181.. 1115, HOSSAIN, K.M.Z., PARSONS, A.J., RUDD, C.D., AHMED, I., THIELEMANS, W., 2014. Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres European Polymer Journal. 53(1), 270-281 SHARMIN, N., PARSONS, A.J., RUDD, C.D., AHMED, I., 2014. Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5 Journal of Biomaterials Applications. 29(5), 639-653 LIU, X., HASAN, M.S., GRANT, D.M., HARPER, L.T., PARSONS, A.J., PALMER, G., RUDD, C.D., AHMED, I., 2014. Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites Journal of Biomaterials Applications. 29(5), 675-687 FELFEL, R. M., AHMED, I., PARSONS, A. J., PALMER, G., SOTTILE, V. and RUDD, C. D., 2013. Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS. 33(4), 1914-1924 HASAN, M. S., AHMED, I., PARSONS, A. J., WALKER, G. S. and SCOTCHFORD, C. A., 2013. Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A. 101(11), 3301-3310 FELFEL, R. M., AHMED, I., PARSONS, A. J. and RUDD, C. D., 2013. Bioresorbable screws reinforced with phosphate glass fibre: Manufacturing and mechanical property characterisation JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. 17, 76-88 HASAN, M.S., AHMED, I., PARSONS, A.J., WALKER, G.S., SCOTCHFORD, C.A., 2013. The influence of coupling agents on mechanical property retention and long-term cytocompatibility of phosphate glass fibre reinforced PLA composites Journal of the Mechanical Behavior of Biomedical Materials. 28, 1-14 HASAN, M.S., AHMED, I., PARSONS, A.J., WALKER, G.S., SCOTCHFORD, C.A., 2013. Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester Journal of Biomedical Materials Research - Part A. 101(11), 3301-3310 LIU, X., GRANT, D.M., PARSONS, A.J., HARPER, L.T., RUDD, C.D., AHMED, I., 2013. Magnesium coated bioresorbable phosphate glass fibres: Investigation of the interface between fibre and polyester matrices BioMed Research International. 2013, SHARMIN, N., HASAN, M.S., PARSONS, A.J., FURNISS, D., SCOTCHFORD, C.A., AHMED, I., RUDD, C.D., 2013. Effect of boron addition on the thermal, degradation, and cytocompatibility properties of phosphate-based glasses BioMed Research International. 2013, HASAN, M.S., AHMED, I., PARSONS, A.J., RUDD, C.D., WALKER, G.S., SCOTCHFORD, C.A., 2013. Investigating the use of coupling agents to improve the interfacial properties between a resorbable phosphate glass and polylactic acid matrix Journal of Biomaterials Applications. 28(3), 354-366 HAQUE, P., AHMED, I., PARSONS, A., FELFEL, R., WALKER, G., RUDD, C., 2013. Degradation properties and microstructural analysis of 40P 2O5-24MgO-16CaO-16Na2O-4Fe2O 3 phosphate glass fibres Journal of Non-Crystalline Solids. 375, 99-109 FELFEL, R.M., AHMED, I., PARSONS, A.J., PALMER, G., SOTTILE, V., RUDD, C.D., 2013. Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods Materials Science and Engineering C. 33(4), 1914-1924 HAN, N., AHMED, I., PARSONS, A.J., HARPER, L., SCOTCHFORD, C.A., SCAMMELL, B.E., RUDD, C.D., 2013. Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates Journal of Biomaterials Applications. 27(8), 990-1002 FELFEL, R.M., AHMED, I., PARSONS, A.J., RUDD, C.D., 2013. Bioresorbable composite screws manufactured via forging process: Pull-out, shear, flexural and degradation characteristics Journal of the Mechanical Behavior of Biomedical Materials. 18, 108-122 ZAKIR HOSSAIN, K.M., JASMANI, L., AHMED, I., PARSONS, A.J., SCOTCHFORD, C.A., THIELEMANS, W., RUDD, C.D., 2012. High cellulose nanowhisker content composites through cellosize bonding Soft Matter. 8(48), 12099-12110 SHAHARUDDIN, S.I.S., AHMED, I., FURNISS, D., PARSONS, A.J., RUDD, C.D., 2012. Thermal properties, viscosities and densities of (50-x)Na 2O-xCaO-50P2O5 glasses Glass Technology: European Journal of Glass Science and Technology Part A. 53(6), 245-251 FELFEL, R.M., AHMED, I., PARSONS, A.J., RUDD, C.D., 2012. Bioresorbable screws reinforced with phosphate glass fibre: Manufacturing and mechanical property characterisation Journal of the Mechanical Behavior of Biomedical Materials. 17, 76-88 HASAN, M.S., AHMED, I., PARSONS, A.J., WALKER, G.S., SCOTCHFORD, C.A., 2012. Material characterisation and cytocompatibility assessment of quinternary phosphate glasses Journal of Materials Science: Materials in Medicine. 23(10), 2531-2541 FELFEL, R.M., AHMED, I., PARSONS, A.J., HARPER, L.T., RUDD, C.D., 2012. Initial mechanical properties of phosphate-glass fibre-reinforced rods for use as resorbable intramedullary nails Journal of Materials Science. 47(12), 4884-4894 FELFEL, R.M., AHMED, I., PARSONS, A.J., HAQUE, P., WALKER, G.S., RUDD, C.D., 2012. Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plates Journal of Biomaterials Applications. 26(7), 765-789 HOSSAIN, K.M.Z., AHMED, I., PARSONS, A.J., SCOTCHFORD, C.A., WALKER, G.S., THIELEMANS, W., RUDD, C.D., 2012. Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid) Journal of Materials Science. 47(6), 2675-2686 KHAN, RUHUL A., PARSONS, A. J., JONES, I. A., WALKER, G. S. and RUDD, C. D., 2011. Interfacial Properties of Phosphate Glass Fiber/Poly(caprolactone) System Measured Using the Single Fiber Fragmentation Test COMPOSITE INTERFACES. 18(1), 77-90 KHAN, RUHUL A., PARSONS, A. J., JONES, I. A., WALKER, G. S. and RUDD, C. D., 2011. Effectiveness of 3-Aminopropyl-Triethoxy-Silane as a Coupling Agent for Phosphate Glass Fiber-Reinforced Poly(caprolactone)-based Composites for Fracture Fixation Devices JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS. 24(4), 517-534 AHMED, I., HAN, N., PARSONS, A., SCOTCHFORD, C., SCAMMELL, B., RUDD, C., 2011. Effect of increasing fibre volume fraction, orientation and screw-holes in fully resorbable composite plates for bone fracture repair In: FELFEL, R.M., AHMED, I., PARSONS, A.J., WALKER, G.S., RUDD, C.D., 2011. In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods Journal of the Mechanical Behavior of Biomedical Materials. 4(7), 1462-1472 DEY, K., SHARMIN, N., KHAN, R.A., NAHAR, S., PARSONS, A.J., RUDD, C.D., 2011. Effect of iron phosphate glass on the physico-mechanical properties of jute fabric-reinforced polypropylene-based composites Journal of Thermoplastic Composite Materials. 24(5), 695-711 AHMED, I., JONES, I.A., PARSONS, A.J., BERNARD, J., FARMER, J., SCOTCHFORD, C.A., WALKER, G.S., RUDD, C.D., 2011. Composites for bone repair: Phosphate glass fibre reinforced PLA with varying fibre architecture Journal of Materials Science: Materials in Medicine. 22(8), 1825-1834 SCOTCHFORD, C.A., SHATAHERI, M., CHEN, P.-S., EVANS, M., PARSONS, A.J., AITCHISON, G.A., EFEOGLU, C., BURKE, J.L., VIKRAM, A., FISHER, S.E., RUDD, C.D., 2011. Erratum: Repair of calvarial defects in rats by prefabricated, degradable, long fibre composite implants (Journal of Biomedical Materials Research - Part A (2011) 96:1 (230-238)) Journal of Biomedical Materials Research - Part A. 98 A(2), 322 KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2011. Effectiveness of 3-aminopropyl-triethoxy-silane as a coupling agent for phosphate glass fiber-reinforced poly(caprolactone)-based composites for fracture fixation devices Journal of Thermoplastic Composite Materials. 24(4), 517-534 KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2011. Interfacial properties of phosphate glass fiber/poly(caprolactone) system measured using the single fiber fragmentation test Composite Interfaces. 18(1), 77-90 SCOTCHFORD, C.A., SHATAHERI, M., CHEN, P.-S., EVANS, M., PARSONS, A.J., AITCHISON, G.A., EFEOGLU, C., BURKE, J.L., VIKRAM, A., FISHER, S.E., RUDD, C.D., 2011. Repair of calvarial defects in rats by prefabricated, degradable, long fibre composite implants Journal of Biomedical Materials Research - Part A. 96 A(1), 230-238 KHAN, RUHUL A., PARSONS, A. J., JONES, I. A., WALKER, G. S. and RUDD, C. D., 2010. Degradation and Interfacial Properties of Iron Phosphate Glass Fiber-Reinforced PCL-Based Composite for Synthetic Bone Replacement Materials POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING. 49(12), 1265-1274 PARSONS, A.J., AHMED, I., RUDD, C.D., CUELLO, G.J., PELLEGRINI, E., RICHARD, D., JOHNSON, M.R., 2010. Neutron scattering and ab initio molecular dynamics study of cross-linking in biomedical phosphate glasses Journal of Physics Condensed Matter. 22(48), PARSONS, A.J., AHMED, I., NIAZI, M.I.K., HABEB, R.R., FITZPATRICK, B., WALKER, G.S., JONES, I.A., RUDD, C.D., 2010. Mechanical and degradation properties of phosphate based glass fibre/PLA composites with different fibre treatment regimes Science and Engineering of Composite Materials. 17(4), 243-260 HAQUE, P., PARSONS, A.J., BARKER, I.A., AHMED, I., IRVINE, D.J., WALKER, G.S., RUDD, C.D., 2010. Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents Composites Science and Technology. 70(13), 1854-1860 KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2010. Degradation and interfacial properties of iron phosphate glass fiber-reinforced pcl-based composite for synthetic bone replacement materials Polymer - Plastics Technology and Engineering. 49(12), 1265-1274 PARSONS, A.J., AHMED, I., HAN, N., FELFEL, R., RUDD, C.D., 2010. Mimicking bone structure and function with structural composite materials Journal of Bionic Engineering. 7(SUPPL.), HAQUE, P., BARKER, I.A., PARSONS, A., THURECHT, K.J., AHMED, I., WALKER, G.S., RUDD, C.D., IRVINE, D.J., 2010. Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber-reinforced PLA composites Journal of Polymer Science, Part A: Polymer Chemistry. 48(14), 3082-3094 KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2010. Preparation and characterization of phosphate glass fibers and fabrication of poly(caprolactone) matrix resorbable composites Journal of Reinforced Plastics and Composites. 29(12), 1838-1850 AHMED, I., PARSONS, A., JONES, A., WALKER, G., SCOTCHFORD, C., RUDD, C., 2010. Cytocompatibility and effect of increasing MgO content in a range of quaternary invert phosphate-based glasses Journal of Biomaterials Applications. 24(6), 555-575 AHMED, I., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2009. Biodegradable composite materials as bone regenerative implants In: COZIEN-CAZUC, S., PARSONS, A.J., WALKER, G.S., JONES, I.A., RUDD, C.D., 2009. Real-time dissolution of P40Na20Ca16Mg24 phosphate glass fibers Journal of Non-Crystalline Solids. 355(50-51), 2514-2521 HAQUE, P., PARSONS, A.J., AHMED, I., IRVINE, D.J., WALKER, G.S., RUDDA, D., 2009. Oligomer coupling agents for phosphate based glass fibre/PLA composites In: PARSONS, A.J., AHMED, I., HAQUE, P., FITZPATRICK, B., NIAZI, M.I.K., WALKER, G.S., RUDD, C.D., 2009. Phosphate Glass Fibre Composites for Bone Repair Journal of Bionic Engineering. 6(4), 318-323 EFEOGLU, C., BURKE, J.L., PARSONS, A.J., AITCHISON, G.A., SCOTCHFORD, C., RUDD, C., VIKRAM, A., FISHER, S.E., 2009. Analysis of calvarial bone defects in rats using microcomputed tomography: potential for a novel composite material and a new quantitative measurement British Journal of Oral and Maxillofacial Surgery. 47(8), 616-621 AHMED, I., CRONIN, P.S., NEEL, E.A., PARSONS, A.J., KNOWLES, J.C., RUDD, C.D., 2009. Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite Journal of Biomedical Materials Research - Part B Applied Biomaterials. 89(1), 18-27 KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S., RUDD, C.D., 2009. Surface treatment of phosphate glass fibers using 2-hydroxyethyl methacrylate: Fabrication of poly(caprolactone)-based composites Journal of Applied Polymer Science. 111(1), 246-254 PARSONS, A.J., AHMED, I., JONES, I.A., SCOTCHFORD, C.A., WALKER, G.S., RUDD, C.D., 2009. Composites for bone repair: Phosphate glass fibre reinforced PLA with varying fibre architecture In: 487-490 PARSONS, A.J., AHMED, I., HAQUE, P., NIAZI, M.I.K., WALKER, G.S., RUDD, C.D., 2009. Improving phosphate glass fibre performance in composites In: 68-70 COZIEN-CAZUC, S., PARSONS, A.J., WALKER, G.S., JONES, I.A. and RUDD, C.D., 2008. Effects of aqueous aging on the mechanical properties of P40Na20Ca16Mg24 phosphate glass fibres Journal of Materials Science. 43(14), 4834-4839 NIAZI, M.I.K., AHMED, I., PARSONS, A.J., HABEB, R.R., FITZPATRICK, B., WALKER, G.S. and RUDD, C.D., 2008. Durability of Phosphate Glass Fibre/PLA Composites with different fibre treatments In: Duracosys2008.
AHMED, I., PARSONS, A.J., PALMER, G., KNOWLES, J.C., WALKER, G.S. and RUDD, C.D., 2008. Weight Loss, Ion Release and Initial Mechanical Properties of a Binary Calcium Phosphate Fibre/PCL Composite Acta Biomaterialia. 4, 1307-1314 (In Press.)
RUDD, C.D., PARSONS, A.J. and WALKER, G.S., 2008. Degradable Composite WO2008035088 03/01/2008 00:00:00
AHMED, I., PARSONS, A.J., PALMER, G., KNOWLES, J.C. and RUDD, C.D., 2008. The Mechanical Properties of PCL and PLA Phosphate Glass Fibre Reinforced Composites In: World Biomaterials Congress.
AHMED, I., PARSONS, A.J., NAZHAT, S.N., RUDD, C.D. and KNOWLES, J.C., 2008. Comparison of Glasses in the Range xNa2O-(50-x)CaO-50P2O5 Made Using Different Precursors Glass Technology: The European Journal of Glass Science & Technology Part A. 49(2), 63-72
PARSONS, A.J., BUTROUS, P., AHMED, I., SCOTCHFORD, C.A. and RUDD, C.D., 2008. Investigating the Degradation Rate of Novel Phosphate Glass, Under Different Temperatures and pH Levels In: World Biomaterials Congress.
AHMED, I., PARSONS, A. J., RUDD, C. D., NAZHAT, S. N., KNOWLES, J. C., GUERRY, P. and SMITH, M. E., 2008. Comparison of phosphate-based glasses in the range 50P(2)O(5)-(50-x)CaO-xNa(2)O prepared using different precursors GLASS TECHNOLOGY-EUROPEAN JOURNAL OF GLASS SCIENCE AND TECHNOLOGY PART A. 49(2), 63-72
PARSONS, A. J. and RUDD, C. D., 2008. Glass forming region and physical properties in the system P2O5-Na2O-Fe2O3 JOURNAL OF NON-CRYSTALLINE SOLIDS. 354(40-41), 4661-4667 PARSONS, A., BUTROUS, P., AHMED, I., SCOTCHFORD, C., RUDD, C., 2008. Investigating the degradation rate of novel phosphate glass, under different temperatures and pH levels In: 1171 AHMED, I., PARSONS, A., PALMER, G., KNOWLES, J., RUDD, C., 2008. The properties of PCL and PLA reinforced with phosphate based glass fibres In: 128 AHMED, I., PARSONS, A.J., PALMER, G., KNOWLES, J.C., WALKER, G.S., RUDD, C.D., 2008. Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre/PCL composite Acta Biomaterialia. 4(5), 1307-1314 COZIEN-CAZUC, S., PARSONS, A.J., WALKER, G.S., JONES, I.A., RUDD, C.D., 2008. Effects of aqueous aging on the mechanical properties of P 40Na20Ca16Mg24 phosphate glass fibres Journal of Materials Science. 43(14), 4834-4839 AHMED, I., PARSONS, A.J., RUDD, C.D., NAZHAT, S.N., KNOWLES, J.C., GUERRY, P., SMITH, M.E., 2008. Comparison of phosphate-based glasses in the range 50P2O 5-(50-x)CaO-xNa2O prepared using different precursors Glass Technology: European Journal of Glass Science and Technology Part A. 49(2), 63-72 AHMED, I., PARSONS, A.J., SCOTCHFORD, C.A. and RUDD, C.D., 2007. Fully Resorbable Composites as Bone Regenerative Implant Devices In: FP7 General Information Meeting and EuMAT Brokerage Event.
AHMED, I., PALMER, G., PARSONS, A.J., KNOWLES, J.C. and RUDD, C.D., 2007. The Initial Properties of a Binary Calcium Phosphate-Based Glass Fibre/PCL Composite In: 6th Annual UKSB Conference.
PARSONS, A.J., AHMED, I., YANG, J. and RUDD, C.D., 2007. Heat-Treatment of Phosphate Glass Fibres and its Effect on Composite Property Retention In: ICCM-16.
A.J. PARSONS, I. AHMED, J. YANG, S. COZIEN-CAZUC AND C.D. RUDD., 2007. Heat-Treatment of Phosphate Glass Fibres and Its Effect on Composite Property Retention. In: Proceedings of the 16th International Conference on Composite Materials (ICCM-16)..
AHMED, I., PARSONS, A.J., COZIEN-CAZUC, S., YANG, J. and RUDD, C.D., 2006. Using Phosphate-Based Glass Fibres to Reinforce Biodegradable Polymers In: BITEG Meeting, 8th Annual White Rose Tissue Engineering Meeting.
KHAN, R.A., PARSONS, A.J., JONES, I.A., WALKER, G.S. and RUDD, C.D., 2006. Effect of surface treatment of phosphate glass fibres using 3-amino propyl triethoxy silane on poly(e-caprolactone) based biomedical composites In: 12th European Conference on Composite Materials.
HABEB, R.R, KHAN, R.A., JING, Y., PARSONS, A.J., WALKER, G.S., JONES, I.A. and RUDD, C.D., 2006. Textile-Based Bio-Compatible Composites with Low Temperature Formability In: TEXCOMP-8, 8th International Conference on Textile Composites.
HABEB, R.R., KHAN, R.A., COZIEN-CAZUC, S., JING, Y., PARSONS, A.J., WALKER, G.S., JONES, I.A., SCOTCHFORD, C.A. and RUDD, C.D., 2006. Novel fabrication methods for (low temperature) thermoformable composites intended for medical applications In: 8th International Conference on Flow Processes in Composite Materials.
PARSONS, A.J., 2006. Vanishing Act - The Design of Degradable Composites for Bone Repair In: East Midlands Materials Society Meeting.
AHMED, I., PARSONS, A.J., NAZHAT, S.N., KNOWLES, J.C. and RUDD, C.D., 2006. Investigation of Phosphate-Based Glasses in the Range 50P2O5-(50-x)CaO-xNa2O Prepared Using Different Precursors In: FibreMed'06.
AHMED, I., PARSONS, A.J., COZIEN-CAZUC, S., YANG, J. and RUDD, C.D., 2006. Phosphate Glass Fibres as Reinforcement in Resorbable Composites for Medical Implant Devices In: The Fiber Society 2006 Fall Annual Meeting and Technical Conference.
SCHUBEL, P.J., PARSONS, A.J., LESTER, E.H., WARRIOR, N.A. and RUDD, C.D., 2006. Characterisation of thermoset laminates for cosmetic automotive applications: Part II - Cure and residual volatile assessment Composites Part A: Applied Science and Manufacturing. 37A(10), 1747-1756
PARSONS, A.J., BURLING, L.D., SCOTCHFORD, C.A., WALKER, G.S. and RUDD, C.D., 2006. Properties of sodium-based ternary phosphate glasses produced from readily available phosphate salts Journal of Non-Crystalline Solids. 352(50-51), 5309-5317 COZIEN-CAZUC, S., PARSONS, A.J., BURLING, L.D., WALKER, G.S., JONES, I.A., ROBITAILLE, F. and RUDD, C.D., 2005. Characterisation of Phosphate Glass Fibres for Resorbable Bio-Medical Composites In: Spring Fiber Society Conference.
KHAN, R.A., PARSONS, A.J., COZIEN-CAZUC, S., JONES, I.A., WALKER, G.S. and RUDD, C.D., 2005. Processing and characterisation of iron-phosphate glass fibres for polycaprolactone based biomedical composites In: The Fiber Society 2005 Fall Annual Meeting and Technical Conference. (In Press.)
KHAN, R.A., PARSONS, A.J., COZIEN-CAZUC, S., JONES, I.A., WALKER, G.S. and RUDD, C.D., 2005. Studies on the interfacial characterisation of a biomedical composite In: UK Society for Biomaterials 4th Conference.
COZIEN-CAZUC, S., PARSONS, A.J., BURLING, L.D., WALKER, G.S., JONES, I.A., ROBITAILLE, F. and RUDD, C.D., 2005. Suitability of Phosphate Glass Fibres for Resorbable Bio-Medical Composites In: 15th International Conference on Composites Materials.
PARSONS, A.J., EVANS, M., RUDD, C.D. and SCOTCHFORD, C.A., 2004. Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell response Journal of Biomedical Materials Research. Part A. 71(2), 283-291 PARSONS, A.J., BURLING, L.D., RUDD, C.D., SCOTCHFORD, C.A. and WALKER, G.S., 2004. The effect of production regime and crucible materials on the thermal properties of sodium phosphate Glasses Produced from Salts Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 71(1), 22-29 PARSONS, A.J., COZIEN-CAZUC, S., AITCHISON, G., BURLING, L.D., ROBITAILLE, F., SCOTCHFORD, C.A., WALKER, G.S. and RUDD, C.D., 2004. Reinforcement of Degradable Medical Implant Devices with Phosphate Glass Fibres In: IOM3 conference.
PARSONS, A.J., COZIEN-CAZUC, S., AITCHISON, G., BURLING, L.D., ROBITAILLE, F., SCOTCHFORD, C.A., WALKER, G.S. and RUDD, C.D., 2004. Phosphate Glass Fibres as Reinforcement in Degradable Composites for Medical Implant Devices In: 11th European Conference on Composite Materials. (In Press.)
COZIEN-CAZUC, S., ROBITAILLE, F., WALKER, G.S., PARSONS, A.J., BURLING, L.D., RUDD, C.D. and , 2004. Proprietes Mecaniques de Fibres de Verre pour Applications Medicales In: 4eme Salon des Materiaux Innovants et Technologies Associees.
COZIEN-CAZUC, S., ROBITAILLE, F., WALKER, G.S., PARSONS, A.J., BURLING, L.D. and RUDD, C.D., 2003. Mechanical Properties of Glass Fibres for Medical Applications In: 2nd International Conference on EcoComposites.
PARSONS, A.J., BURLING, L.D., RUDD, C.D., WALKER, G.S. and SCOTCHFORD, C.A., 2002. Effect of cations on the properties of phosphate glasses for the reinforcement of degradable biomedical polymers In: Trans. 17th Conference of the European Society for Biomaterials.
WEBB, P.B., MARR, P.C., PARSONS, A.J., GIDDA, H.S. and HOWDLE, S.M., 2000. Dissolving biomolecules and modifying biomedical implants with supercritical carbon dioxide Pure and Applied Chemistry. 72(7), 1347-1356 AHMED, I., CRONIN, P., ABOUNEEL, E., PARSONS, A.J., KNOWLES, J. and RUDD, C.D., Retention of Mechanical Properties and Cytocompatibility of a Phosphate-Based Glass Fibre/Polylactic acid Composite Journal of Biomedical Materials Research. Part B: Applied Biomaterials. (In Press.)