WILLIAMS, J,, HIBBERD, S., POWER, H. and RILEY, D.S., 2012. Thin film rimming flow subject to droplet impact at the surface: (accepted) Physics of Fluids. (In Press.)
GARRATT, J.E., HIBBERD, S., CLIFFE, K.A. and POWER, H., 2012. Centrifugal inertia effects in high-speed hydrostatic air thrust bearings: Accepted Journal of Engineering Mathematics. 1-22 (In Press.)
C WANG, H P MORVAN, S HIBBERD and K A CLIFFE, 2012. Specifying and Benchmarking a Thin Film Model for Oil Systems Applications in ANSYS FLUENT. In: Proceedings of ASME Turbo Expo 2012: June 11-15, 2012, Copenhagen, Denmark (In Press.)
R SYMONDS, S HIBBERD and T CROSS, 2012. Supporting engineering students with non-typical backgrounds using a proactive intervention to facilitate transition to Higher Education MSOR Connections. 12(1), 34-38
T CROSS, R SYMONDS and S HIBBERD, 2012. In: Facilitating Transition for Engineering Students in Mathematics using a Proactive Intervention: STEM 1st Annual Conference, 12-13 April 2012
Imperial College, London HEA. (In Press.)
HIBBERD, S., 2011. Integrative Use of Group Projects. In: ROBINSON, M., CHALLIS, N. and THOMLINSON, M., eds., Developing Graduate Skills in HE Mathematics Programmes - Case Studies of Successful Practice: Reflections on experience, practice and provision Math, Stats and OR Network. 18-19
SYMONDS, R, HIBBERD, S. and CROSS, T., 2011. A proactive intervention to facilitate transition to HE for engineering students with non-typical backgrounds In: 7th IMA Conference on Mathematical Education of Engineers. 1-9
WANG, C., MORVAN, H.P., HIBBERD, S. and CLIFFE, K.A., 2011. Thin Film Modelling for Aero-Engine Bearing Chambers: GT2011 - 46259 In: Proceedings of ASME Turbo Expo 2011 - GT2011. 1 - 10 (In Press.)
GARRATT, J.E., CLIFFE. K.A., HIBBERD, S. and POWER, H., 2010. A numerical scheme for solving a periodically forced Reynolds equation. International Journal for Numerical Methods in Fluids. 67(5), 559-580 BAXTER,S.J., POWER, H., CLIFFE, K.A. and HIBBERD, S., 2010. Free surface Stokes flows obstructed by multiple obstacles International Journal for Numerical Methods in Fluids. 62(2), 530-564 HIBBERD, S., 2010. Maths, Skills and Employability: An Integrative Use of Group Projects. In: BAKER, G., FALK-WHYNES, J. and SIDOROVITCH, A., eds., Teaching for Integrative Learning Innovations in University Practice 3. Centre for Integrative Learning, University of Nottingham. 59-72
HIBBERD, S. and GROVE, M., 2010. Mini-symposium on 'Mathematics Education' held at the British Applied Mathematics Colloquium (BAMC) MSOR Connections. 9(4), 47-52
HIBBERD, S., 2010. Maths, skills and employability - an integrative use of group projects. In: ROBINSON, M., CHALLIS N. and TOMLINSON,M., eds., Maths at University -: Reflections on experience, practice and provision. More Maths Grads Project. 182-187
HIBBERD, S., 2010. Employability Skills: A key role for mathematics. In: , ed., Responding to the mathematics problem: The implementation of Institutional Support Mechansms Maths, Stats & OR Network. 76-82
CUI, X., MORVAN. H.P., CLIFFE, K.A. and HIBBERD, S., 2009. Film modelling with application to aero-engine bearing chamber flows In: Grand Review in the State-of-the-Art in the Numerical Simulation of Fluid Flow 2, IMech E, London. (In Press.)
BAXTER, S.J., POWER. H., CLIFFE. K.A. and HIBBERD. S., 2009. Numerical simulation of a free surface Stokes flow around multiple cylinders on an inclined plane using a boundary element method and radial basis function approach. In: Grand Review in the State-of-the-Art in the numerical simulation of fluid flow 2, IMechE, London. (In Press.)
BAXTER, S.J., POWER, H., CLIFFE, K.A. and HIBBERD, S., 2009. Three-dimensional thin film flow over and around an obstacle on an inclined plane Physics of Fluids. 21(3), 1-23 BAXTER, S.J., POWER, H., CLIFFE, K.A. and HIBBERD, S., 2009. An efficient numerical scheme for a low Reynolds number flow in a three-dimensional lid-driven cavity. In: Seventh UK Conference on Boundary Integral Methods. 1-13 (In Press.)
SHUIB, N., POWER, H. and HIBBERD, S., 2009. BEM solutions of thin film flows on an inclined plane with a bottom outlet. Engineering Analysis with Boundary Elements. 388-398
HIBBERD,S and GROVE, M., 2009. Developing graduate and employability skills within a mathematical sciences programme MSOR Connections. 9(2), 33-39
BAXTER, S.J., POWER, H., CLIFFE, K.A. and HIBBERD, S., 2008. Simulation of thin flim flow around a cylinder on an inclined plane using the boundary eleemnt method Boundary Elements and Other Mesh Reduction Methods XXX. 13-24
HIBBERD,S. and DEMLOVA, M., 2008. Special Editors: Mathematical Education of Engineers IMA Journal of Teaching Mathematics and its Applications. 27(3),
HIBBERD, S., 2007. Harmonising learning and graduate skills in the mathematical sciences In: CETL-MSOR Conference. 87-92
HARRISON, M., BEALE, B., FOSTER, B., GU, D-W. and HIBBERD, S., 2007. The HELM Transferability Project In: CETL-MSOR Conference 2006. 72-79
FARRAL, M., HIBBERD,S. and SIMMONS, K., 2007. The effect of initial injection conditions on the oil droplet motion in a simplified bearing chamber. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme. 130(1), 1-7 EASTWICK, C.N., SIMMONS, K., WANG, Y. and HIBBERD, S., 2006. Study of aero-engine oil-air separators Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy. 220(7), 707-717 FARRALL, M., SIMMONS, K., HIBBERD, S. and GORSE, P., 2006. A numerical model for oil film flow in an aeroengine bearing chamber and comparison to experimental data Journal of Engineering for Gas Turbines and Power. 128(1), 111-117 SHUAIB, N.H., POWER, H., HIBBERD, S. and SIMMONS, K., 2006. A numerical study of wave structures developed on the free surface of a film flowing on inclined planes and subjected to surface shear International Journal for Numerical Methods in Engineering. 68(7), 755-789 FARRALL, M., HIBBERD, S., SIMMONS, K. and GIDDINGS, D., 2006. Prediction of air/oil exit flows in a commercial aero-engine bearing chamber Proceedings of the Institution of Mechanical Engineers. Part G, Journal of Aerospace Engineering. 220(3), 197-202 HIBBERD, S. and GROVE, M., 2006. A Response to the Royal Society paper: Science Education in 2015 and beyond MSOR CONNECTIONS. VOL 6(NUMB 3), 36-39
FARRALL, M., HIBBERD, S., SIMMONS, K. and YOUNG, C., 2005. Computational investigation of the airflow through a shrouded bevel gear. In: ASME INTERNATIONAL GAS TURBINE INSTITUTE, ed., Proceedings of ASME Turbo Expo 2005, Power for Land, Sea, and Air Conference, Reno, Nevada, USA, June 6-9, 2005. GT2005. New York: American Society of Mechanical Engineers. Paper 68879
FARRALL, M., HIBBERD, S., SIMMONS, K. and YOUNG, C., 2005. Computational investigation of the airflow through a shrouded bevel gear. In: ASME INTERNATIONAL GAS TURBINE INSTITUTE, ed., Proceedings of ASME Turbo Expo 2005, Power for Land, Sea, and Air Conference, Reno, Nevada, USA, June 6-9, 2005. GT2005. New York: American Society of Mechanical Engineers. Paper 68879
HIBBERD, S., 2005. Use of Projects in Mathematics: Dissemination from an MSOR Network mini-project survey MSOR Connections. VOL 5(NUMB 4), 10-16
HIBBERD, S., LITTON, C.D., CHAMBERS, C. and ROWLETT, P., 2004. Embedding CAA and Support for Mathematics in a Web-based Learning Environment In: Math CAA-Series, LTSN Maths, Stats and OR Network, April. FARRALL, M., HIBBERD, S., SIMMONS, K. and GIDDINGS, D., 2004. Predictions of air/oil exit flows in a commercial aero-engine bearing chamber In: Seminar Proceedings: Analytic Methods and Tools in Transmission Systems.
HIBBERD,S., 2004. Sharing of project practice MSOR Connections. 4(1), 28-32
HIBBERD, S., BERRY, S., GREENHOW, M., HOOPER, A., LUKE, G., MALABAR, I. and O'ROURKE, F., 2004. Undergraduate project practice-organisation and assessment In: Proceedings of 30th Undergraduate Mathematics Teaching Conference.
HIBBERD, S., FARRALL, M., SIMMONS, K. and GORSE, P., 2004. A numerical model for oil film flow in an aero-engine bearing chamber and comparison with experimental data In: Proceedings of ASME Turbo Expo 2004: Power for Land, Sea and Air, 2004.
HIBBERD,S., LITTON,C.D., CHAMBERS,C. and ROWLETT,P., 2003. MELEES-e-support or mayham? MSOR Connections. 3(3), 29-34 LITTON, C.D., HIBBERD, S., CHAMBERS, C. and ROWLETT, P., 2003. MELEES--managing mayham? In: IMA Conference Proceedings 'Mathematical Education of Engineers IV',Loughborough.
HIBBERD, S. and MUSTOE, L., 2003. Teaching mathematics and its applications
HIBBERD, S. and MUSTOE, L., 2003. The Mathematical Education of Engineers IV In: IMA Conference Series.
HIBBERD, S., 2003. Statistical Analysis Techniques in ACT. In: Advanced Concrete Technology: Volume 4, Testing and Quality 4. 10/1-10/4
COPE, S.J., HIBBERD, S., WHETSTONE, J., MACRAE, R.J. and MELIA, C.D., 2002. Measurement and mapping of pH in hydrating pharmaceutical pellets using confocal laser scanning microscopy Pharmaceutical Research. VOL 19(NUMBER 10), 1554-1563 EASTWICK, C.N., SIMMONS, K.A., HIBBERD, S., WANG, Y., CARE, I. and AROUSSI, A., 2002. Using CFD to improve aero-engine separator design In: ASME - Pressure vessels and piping. 215-220
SIMMONS, K.A., HIBBERD, S., WANG, Y. and EASTWICK, C.N., 2002. Numerical study of the two-phase air/oil flow within an aeroengine bearing chamber using a coupled Lagrangian droplet tracking method In: Proceedings of ASME Fluids Engineering Division Summer Meeting 2002.
HIBBERD, S., 2002. Using CFD to improve aero-engine air/oil separator designs In: Proceedings of ASME 4th International Symposium on Computational Technologies for Fluid/Thermal/Chemical Systems with Industrial Applications.
HIBBERD, S., SIMMON, K., WANG, Y. and CARE, I., 2002. Numerical study of the two-phase air/oil flow within an aero-engine bearing chamber model using a coupled Largrangian droplet tracking method In: ASME 4th International Symposium on Computational Technologies for Fluid/Thermal/Chemical Systems with Industrial Applications.
HIBBERD, S., 2002. Mathematical modelling skills. In: Effective learning & teaching in Mathematics and its applications Kogan Page, London, UK. 158-174
HIBBERD, S., 2002. Computer based diagnostic testing and support in mathematics. In: Readings in Innovative Ideas in Teaching Collegiate Mathematics 79-203
HIBBERD, S., 2002. 'Case study, BSc & MMath group project in assessment case studies, LTSN Engineering Report: Assessment of Individuals in Teams', LTSN Engineering, Loughborough University
HIBBERD, S., ROBERTS, H., STEWART, B. and QUINNEY, D., 2002. Group projects in mathematical course In: Proceedings of 28th Undergraduate Mathematics Teaching Conference. 70-89
WANG, Y., HIBBERD, S., SIMMONS, K.A., EASTWICK, C.N. and CARE, I., 2001. Application of CFD to modelling two-phase flow in a high-speed aero-engine transmission chamber In: ASME FEDSMð1:ASME 2001 Fluids Engineering Division Summer Meeting. 249-254
HIBBERD, S., WANG, Y., SIMMONS, K., EASTWICK, C. and CARE, I., 2001. Application of CFD to modelling two-phase flow in a high-speed aero-engine transmission chamber In: ASME Fluids Engineering Division, New Orleans.
HOSSAIN, M., WANG, Y., HIBBERD, S. and SIMMONS, K.A., 2000. A Comparison of Flow Characteristics for Two Aeroengine Air/Oil Separators In: NAFEMS Conference on Industrial CFD and the Move Towards Multiphase Analysis.
FARRALL, M., HIBBERD, S. and SIMMONS, K.A., 2000. Computational Modelling of Two-Phase Air/Oil Flow within an Aero-Engine Bearing Chamber In: Proceedings of ASME FEDSM'00. 1-8
HIBBERD, S., HOSSAIN, M., WANG, Y., EASTWICK, C.N. and SIMMONS, K., 2000. A comparison of flow characteristics for two aero-engine air/oil separators In: NAFEMS Conference 'Industrial CFD and the move towards multiphase analyses, Warwick University, 8 November 2000.
LUCK, M. R., YE, J., ALMISLIMANI, H. and HIBBERD, S., 2000. Follicular fluid rheology and the duration of the ovulatory process Journal of Reproduction and Fertility. VOL 120(PART 2), 411-421 EASTWICK, C.N., HIBBERD, S., CARE, I., SIMMONS, K. and WANG, Y., 2000. Numerical Study of the Turbulent Air Flow Field and Droplet Trajectories in a Geometrically Simplified Bearing Chamber with the Presence of an Oil-Air Separator
HIBBERD,S., CROFT,A.C., LAWSON,D.A., MUSTOE,L.R., SHAW,C.T. and SMITH,J.R., 2000. Engineering mathematics matters, curriculum proposals to meet SARTOR 3 requiremnets for Chartered Engineers and Incorporated Engineers Engineering Science and Education Journal. 9(2), 77-87
HIBBERD, S., FARREL, M.B. and SIMMONS, S., 2000. Computational modelling of two-phase air/oil flow within an aero-engine bearing chamber In: Proceedings of ASME FEDSM '00. 1-8
HIBBERD, S. and MUSTOE, L., 2000. The Mathematical Education of Engineers IIII In: IMA Conference Series.
WANG, Y., CARE, I., EASTWICK, C.N., HIBBERD, S. and SIMMONS, K.A., 1999. CFD Study of Droplet Motion in a Simplified Breather Chamber Geometry at High Shaft Rotating Speed In: Multiphase Flow and Heat Transfer Proceedings of the 4th International Symposium.
HIBBERD,S., LUCK,M.R. and BINKS,M., 1999. Towards a university-wide undergraduate Basic IT skills (UG Bits) programme Capability. 4, 32-40
HIBBERD, S., SIMMONS, K. and EASTWICK, C., 1999. Mathematical modelling of an aero gas turbine bearing chamber In: Proceedings IMechE Conference, Concurrent Design and Manufacture of Aerospace Transmission Systems, Rolls-Royce, Derby, May 1999.
HIBBERD, S., WANG, Y., CARE, I., EASTWICK, C. and SIMMONS, K., 1999. CDF study of droplet motion in a simplified breather chamber geometry at high shaft rotation speed In: Proceedings of the Fourch International Symposium Multiphase Flow and Heat Transfer, Xian, China, August, 1999.
HIBBERD, S., CROFT, A.C., LAWSON, D.A., MUSTOE, L.R., SHAW, C.T. and SMITH, J.R., 1999. Engineering mathematics matters, curriculum proposals to meet SARTOR3 requirements for Chartered Engineers and Incorporated Engineers Institute of Mathematics and its Applications, Southend-on-Sea, UK.
HIBBERD, S., CROFT, A.C., LAWSON, D.A., MUSTOE, L.R., SHAW, C.T. and SMTIH, J.R., 1999. 'Responding to SARTOR3' In: Mathematics Today, Institute of Mathematics and its Applications, February 1999, 6-9.
HIBBERD, S., CARE, I., SIMMONS, K. and WANG, Y., 1999. CFD computation of air-oil separatin in an engine breather In: Proceedings IMechE Conference, CFD-Technical Developments and Future Trends, London, December, 1999.
SIMMONS, K.A., EASTWICK, C.N. and HIBBERD, S., 1998. Mathematical modelling of an aero gas turbine bearing chamber In: Aerospace Transmission Systems. 45-50
LEE, A.J., KING, J.R. and HIBBERD, S., 1998. Mathematical modelling of the release of drug from porous, nonswelling transdermal drug-delivery devices IMA Journal of Mathematics Applied in Medicine and Biology. 15(2), 135-164
HIBBERD, S., POLES, R.M. and AZZOPARDI, B.J., 1998. Discontinuous wave solutions in sttatified and annular tow-phase flows In: Proceedings of Third International Conderence on Multiphase Flow, ICMF'98, Lyon, France, 8-12 June.
ROBERTS, P. A., AZZOPARDI, B. J. and HIBBERD, S., 1997. The split of horizontal annular flow at a T-junction Chemical Engineering Science. VOL 52(NUMBER 20), 3441-3453 HIBBERD, S. and MUSTOE, L., 1997. The Mathematical Education of Engineers II In: IMA Conference Series.
HIDER, Z. E., HIBBERD, S. and BAKER, C. J., 1997. Modelling particulate dispersion in the wake of a vehicle Journal of Wind Engineering and Industrial Aerodynamics. VOL 67/68, 733-744 HIBBERD, S., HAU, M.Y. and TAYLOR, A., 1997. Modelling the uptake of diacetyl in extruded starch. In: Flavour Science: Recent Developments RSC Publications, London, UK. 437-441
HIDER, Z., HIBBERD, S. and BAKER, C., 1996. Modelling particulate dispersion in the wake of a vehicle In: CWE2 conference.
HIBBERD, S., MELIA, C.D., CUTTS, L.S., ADLER, J., DAVIES, M.C. and ROBERTS, P.A., 1996. Measuring dynamic processes inside hydrating biopolymer matrices using confocal laser scanning microscopy. In: Gums and Stabilisers for the Food Industry 8 RSC Publications, London, UK. 17-26
ROBERTS, P. A. and HIBBERD, S., 1996. Internal hydraulic jumps at T-junctions Journal of Fluid Mechanics. VOL 314, 331-348 CUTTS, L. S., HIBBERD, S., ADLER, J., DAVIES, M. C. and MELIA, C. D., 1996. Characterising drug release processes within controlled release dosage forms using the confocal laser scanning microscope Journal of Controlled Release. VOL 42(NUMBER 2), 115-124 HIBBERD, S., 1996. The Mathematical Assessment of Students Entering University Engineering Courses Studies in Educational Evaluation. VOL 22(NUMBER 4), 375-384