Browse resources by title

Previous / Next

Questions and activities in lectures

Duration: 4 minutes : 5 seconds

Ed Lester (Department of Chemical & Environmental Engineering).

Can I ask you about asking the students questions in lectures, why do you do it and what do you think are the benefits?

Probably because the attention span of the average person is in the order of minutes. You have got to do anything you can to get them to think for themselves.

The risk is that if you ask them questions and there is total silence, do you accept that they are not going to think for themselves or do you try and encourage them and I think there are techniques for getting them to stump up something.

You will normally find someone in the class who is prepared to give an answer.

One other thing I really noticed in your lecture was set in the little activity or the task you ask groups to go away and talk about a particular point. Could you describe how you've came to use that kind of activity in your lecture?

It is something that I am doing more, especially in courses where, like this one, its environmental protection, it's for engineers, and the concern of environmental protection is not first on their agenda.

So if it is something where we want their opinion, and I would love to know what their opinion is on say environmental protection, do they thinks it's important at all? Then you will get a very good snapshot of the opinion if you split them into groups and they make a list and then you take the papers you read them, you can find out whether they actually care about the subject.

You might suspect that they do or don't, but if you ask them and they write it down, you have it for certain. It's also, again, a good technique for getting them to do something different.

At this point I will keep the diagram that is on there on here as well, but you have got to do something in your groups. Groups you can form of any size, so long as you can see and hear each other.

I want you to make a list, because it's fairly logical, of all the things you would need to know if you were actually modelling a plume.

What are the factors which affect that kind of formation? It's fairly logical, so nominate a scribe, get a piece of paper and write down the things that are going to affect the formation of that plume.

Low level noise as students work in groups.

Give me your lists then, let's have a look.

Wind speed, wind direction, weather conditions, stack geometry, composition, fair doos.

I think the most important thing is that they have got to believe you are not going to embarrass them if they are wrong, and students worrying about what happens if they say something wrong is probably one of the biggest reasons for not suggesting things. If they don't like you either, then that's another reason, so you have got to overcome all those reasons before you try it.

A 50 minute lecture with nothing but talking from the front, nothing but writing, is a very long time and I think anything you can do to mix it up and get them think a bit and discuss something is a good thing.

I guess the only down side, really, is that they won't take it seriously, and they will just be talking about something completely different from your lecture, but on the whole that doesn't tend to happen, if you stage it right it tends to be successful.

Resource 206 of 284
Ed is teaching engineering students on a module about environmental protection (H8BENP Environmental Protection, Level B). Produced February 2007.
192 views on campus, 2700 views in total
Staff on campus who looked at Questions and… also viewed

Using student response systems to improve interaction in ...   (Andrew Fisher; Feb 2008; 3 min 42s video)

Also viewed auto-updated daily

Next resource

Reading academic papers: participation in tutorials.   (Nicola Pitchford; Sep 2009; 4 min 33s video)

Previous resource

Purposes of student-led seminars: development of ...   (Nick Thomas; Jun 2007; 2 min 21s video)

Teaching at Nottingham © Copyright The University of Nottingham
This page:
Printed: 09:06 am, Saturday 16th December 2017

URI_elements = Array ( [1] => browse [2] => title [3] => question698 [4] => )
dfpsb_page_prop['page_Id'] = 3_1
dfpsb_page_prop['bcrumb_type'] = L3
dfpsb_page_prop['pagecat'] = 1
dfpsb_page_prop['set'] =
dfpsb_config['numperpage'] = 10

res_id is empty
Array ( [0] => Browse resources by title [1] => 1 [2] => By title [3] => [4] => Browse resources )