TALAT Lecture 3208: The Finishing of Castings
This lecture provides an introduction to some of the finer points in the production of high quality castings. The students will be able to understand the various processes for sealing porosity in badly made castings and to appreciate factors influencing the accuracy of castings, including a basic understanding of how to control and measure casting dimensions. Basic understanding of the foundry industry is assumed.
TALAT Lecture 3204: The Freezing of Castings
This lecture provides an introduction to solidification theory; it aims at achieving an essential background understanding of solidification and cast structures. Basic knowledge of the solidification of metals is assumed.
Zimska pokrajina na Pohorju
Fotografija prikazuje značilno pohorsko pokrajino pozimi v vsej lepoti. Uporabimo jo lahko pri pouku predmeta spoznavanje narave in družbe, učna tema narava po zimi.,Typical Pohorje winter landscape - pines, snow and sun.
TALAT Lecture 2203: Structural materials fabrication
This lecture gives a brief introduction into the basic fabrication methods for structural aluminium alloy materials with respect to machining, forming, joining and surface treatments as a necessary background for the design process; it describes the subject of welding structural aluminium alloys in order to understand the materials requirements which the designer has to take into account when designing load carrying welded aluminium structures. General materials engineering background is assumed
TALAT Lecture 2201.01: State of the Art
This lecture gives an introduction into use of aluminium in stressed applications, with examples of the past experiences and likely future developments. A general engineering background is an advantage but the subject matter is suitable for most audiences concerned with transport and structural applications.
TALAT Lecture 2102.03: The Transmission Housing of an Inboard-Outboard Engine, Special Study: Castin
This lecture offers an example of product development. It imparts knowledge about different ways of casting aluminium and criteria for selecting casting methods; the heat treatment of aluminium; corrosion-proofing and surface treatment of cast alloys used in a saline environment and choice of alloy. It provides insight into how to develop a product using the general specificiations and the interaction between form, material and processing chain and ?the importance of being thoroughly familiar wi
TALAT Lecture 2102.02: An Upper Casing for an Automobile Steering Column, Special Study: Impact Extr
This lecture offers an example of product development. It imparts knowledge about cold forging of aluminium and choice of alloy. It provides insight into how to develop a product using the general specifications and the interaction between form, material and processing chain and the importance of being thoroughly familiar with the different design materials, their processing possibilities and properties. The lecture is recommended for those situations, where a brief, general background informati
TALAT Lecture 2101.02: The product development process
This lecture provides a brief introduction to the product development process and systematic design. It aims at generating interest in and a common understanding of the product development process; telling about the basic principles and terminology used in connection with systematic design in order to facilitate the use of the four product design examples presented in this course (see TALAT lectures 2102.01 - .04). The lecture is recommended for those situations, where a brief, general backgrou
TALAT Lecture 1100.01: Introduction: Aluminium, a Light Metal
This lecture provides basic information about the history of aluminium, the principles behind the production of primary metal, environmental properties, potential applications, areas of application. The lecture is recommended for those situations, where a brief, general background information about aluminium is needed as an introduction of other subject areas of aluminium application technologies. This lecture is part of the self-contained course "Aluminium in Product Development", which is trea
The term ?Intelligenz Vuilding? is not any longer a mere slogan used by smart salesmen of commercial and / or office buildings. During recent years it has come to describe a broad engineering concept for building design, construcions and operation, the realization of which challenges architects and engineers involved in the various aspects of building industry. The concept empasizes a multidisciplinary effort to integrate and potimize the building strctures, systems , services and management in
Experiments as Modus Operandi
Architecture has for too long focused on the presentation of pristine objects and the presentation in drawing form. A critical understanding of the field, however, necessitates a reevaluation of the roles of the process involved in the production of building. Rather than emphasizing surface appearances, an architecture rooted in process aims ultimately at revealing the fundamental and deep structures inherent within the making of architecture. One of the primary tasks of the process is to provok
Interface boundary between h-BN and Si3N4 grains
The micrograph shows a regularly stepped interface boundary between h-BN (precipitate) and Si3N4 grains (within a silicon nitride particulate-reinforced silicon carbide composite). The occurrence of BN inclusions results from the introduction of colloidal BN into the hot isostatic pressing process. They are formed from B2O3 present as a thin surface film on the BN particles in the barrier layer. B2O3 will be molten during the pressing process and will diffuse rapidly into the powder compact and
Misoriented interphase boundary between h-BN and SiC grains
The micrograph shows misoriented interphase boundary between h-BN (precipitate) and SiC grains (within a silicon nitride particulate-reinforced silicon carbide composite). The occurrence of BN inclusions results from the introduction of colloidal BN into the hot isostatic pressing process. They are formed from B2O3 present as a thin surface film on the BN particles in the barrier layer. B2O3 will be molten during the pressing process and will diffuse rapidly into the powder compact and react wit
Delamination cracks in h-BN particles.
h-BN particles were subjected to compressive stress in the (0001) planes (within a silicon nitride particulate-reinforced silicon carbide composite). The occurrence of BN inclusions results from the introduction of colloidal BN into the hot isostatic pressing process. They are formed from B2O3 present as a thin surface film on the BN particles in the barrier layer. B2O3 will be molten during the pressing process and will diffuse rapidly into the powder compact and react with Si3N4 to form BN. Su
The Changing Image of the City
The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the
Creativity and Collaboration in Architecture Education in the UAE
A review of national government literature indicates that today?s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and p
Diffusion Across a Sheep Red Blood Cell Membrane
This cell membrane physiology laboratory uses sheep red blood cells to determine: (1) the isotonic and hemolytic molar concentrations of electrolytes and nonelectrolytes, and degree of electrolyte dissociation; (2) the diffusion rate of penetrating molecules of varying size and lipid solubility; and (3) the relationship of molecular size, number of hydroxyl groups, and partition coefficient to diffusion rate. Student research teams then design an experiment using the acquired techniques to deter
Developing a New Approach of Computer Use ?KISS Modeling? for Design-Ideas Alternatives of Form Mass
This research aims at developing a new approach called ?KISS Modeling?. KISS is generally a rule of ?Keep It Simple, Stupid? that will be applied in modeling process investigated and presented by the research. The new approach is implemented in a computer program ?KISS Modeling? that generates three dimensional forms based on simplifying the concept of shape recognition in design. The research, however, does not employ totally concepts of shape recognition or shape understanding in Artificial In
No More Fear or Doubt: Electronic Architecture in Architectural Education
Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combin