Ali Akhavan Farid

Contact

• workRoom BB76 Block B
  Malaysia Campus
  Jalan Broga
  43500 Semenyih
  Selangor Darul Ehsan
  Malaysia
• work+6 (03) 8725 3556
• Ali.Farid@nottingham.edu.my

Biography

Dr. Ali Akhavan Farid received his PhD from Universiti Teknologi Malaysia (UTM) in 2012. He has served for more than five years in Azad University, UTM and Multimedia University as a lecturer before joining UNMC. His areas of specialisations are in metal cutting and high-speed machining. He is actively involved in other research areas such as sustainable manufacturing, design, and casting.

Expertise Summary

Metal cutting operations for aerospace and automotive applications Mechanical Design Biomaterial CAD/CAM Design and Analysis of experiments, Process optimization

Selected Publications

• JAHANBAKHSH, M., FARID, A. AKHAVAN and LOTFI, MOHAMMAD, 2018. Optimal flank wear in turning of Inconel 625 super-alloy using ceramic tool PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 232(2), 208-216

• View all publications

• TIYAMIKE BANDA, KING YUNG HO, ALI AKHAVAN FARID and CHIN SEONG LIM, 2022. Characterization of Tool Wear Mechanisms and Failure Modes of TiAlN-NbN Coated Carbide Inserts in Face Milling of Inconel 718 Journal of Materials Engineering and Performance. 31(3), 2309–2320
• LEE WEI XIONG, ALI AKHAVAN FARID and HAMIDREZA NAMAZI, 2022. Investigation of anodised surface complexity and its correlation with surface hydrophilicity using fractal analysis Results in Surfaces and Interfaces. 6,
• MOHAMMAD LOTFI, ALI AKHAVAN FARID, JAVAD AKBARI, SAFIAN SHARID and AMRIFAN, 2022. Evaluation of surface integrity when drilling Inconel 718 through experimental measurement and finite element analysis The International Journal of Advanced Manufacturing Technology. 4237–4248
• TIYAMIKE BANDA, ALI AKHAVAN FARID, VERONICA LESTARI and LIM CHIN SEONG, 2022. Application of machine vision for tool condition monitoring and tool performance optimization–a review The International Journal of Advanced Manufacturing Technology.
• BANDA, TIYAMIKE, JAUW, VERONICA LESTARI, LI, CHUAN, FARID, ALI AKHAVAN and LIM, CHIN SEONG, 2022. Flank wear prediction using spatial binary properties and artificial neural network in face milling of Inconel 718 INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 120(7-8), 4387-4401
• BANDA, TIYAMIKEAND WONG, KOK-CHEONGAND FARID, ALI AKHAVANAND LIM, CHIN SEONG, 2021. Comparative Study of Temperature Prediction in the Machining Process of Ti-6Al-4V, Inconel 718 and AISI4340 Using Numerical Analysis In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. 579-588
• AKHAVAN FARID, ALI, SHARIF, SAFIAN and IDRIS, MOHD HASBULLAH, 2021. Performance and wear mechanisms of uncoated, TiAlN, and AlTiN-coated carbide tools in high-speed drilling of Al-Si alloy INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 113(9-10), 2671-2684
• 2021. Machine Vision and Convolutional Neural Networks for Tool Wear Identification and Classification In:
• 2021. Complexity-Based Analysis of the Effect of Forming Parameters on the Surface Finish of Workpiece in Single Point Incremental Forming (SPIF)
• 2021. A Numerical Study of the effect of Bolt Thread Geometry on the Load Distribution of Continuous Threads
• MOHAMMAD LOTFI, SAEID AMINI,, ZAHRA AGHAYAR, SAYED ALI SAJJADY and ALI AKHAVAN FARID, 2020. Effect of 3D elliptical ultrasonic assisted boring on surface integrity Measurement. 163,
• ALI AKHAVAN FARID and MOHAMMAD ASYRAFF ZULKIF MOHDYUSOFF, 2020. Effect of cutting path strategy on the quality of convexly curved surface and its energy consumption International Journal of Lightweight Materials and Manufacture. 3(4), 338-343
• TAN, P. S., FARID, ALI AKHAVAN, KARIMZADEH, ATEFEH, KOLOOR, SEYED SAEID RAHIMIAN and PETRU, MICHAL, 2020. Investigation on the Curvature Correction Factor of Extension Spring MATERIALS. 13(18),
• DAYAGHI, E, BAKHSHESHI-RAD, H R, HAMZAH, E, AKHAVAN-FARID, A, ISMAIL, A F, AZIZ, M and ABDOLAHI, E, 2019. Magnesium-zinc scaffold loaded with tetracycline for tissue engineering application: In vitro cell biology and antibacterial activity assessment. Materials science & engineering. C, Materials for biological applications. 102, 53-65
• BAKHSHESHI-RAD, HAMID REZA, DAYAGHI, EHSAN, ISMAIL, AHMAD FAUZI, AZIZ, MADZLAN, AKHAVAN-FARID, ALI and CHEN, XIONGBIAO, 2019. Synthesis and in-vitro characterization of biodegradable porous magnesium-based scaffolds containing silver for bone tissue engineering TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. 29(5), 984-996
• THASTHAKEER, AHMAD THUFFAIL, FARID, ALI AKHAVAN, SENG, CHANG TECK and NAMAZI, HAMIDREZA, 2019. ANALYSIS OF THE CORRELATION BETWEEN FRACTAL STRUCTURE OF CUTTING FORCE SIGNAL AND SURFACE ROUGHNESS OF MACHINED WORKPIECE IN END MILLING OPERATION FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY. 27(2),
• NAMAZI, HAMIDREZA, FARID, ALI AKHAVAN and SENG, CHANG PECK, 2019. DECODING OF THE RELATION BETWEEN FRACTAL STRUCTURE OF CUTTING FORCE AND SURFACE ROUGHNESS OF MACHINED WORKPIECE IN END MILLING OPERATION FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY. 27(4),
• FARID, A. AKHAVAN, LOTFI, MOHAMMAD and JAHANBAKHSH, M., 2019. OPTIMUM FLANK WEAR OF TiAlN-COATED TOOL: TOWARD PRODUCTIVE ROUGH CUTTING OF INCONEL 625 SURFACE REVIEW AND LETTERS. 26(8),
• MOHAMMAD LOTFI, ALI AKHAVAN FARID and MEHRAN JAHANBAKHSH, 2019. Tool wear deceleration in turning of Inconel 625 International Journal of Machining and Machinability of Materials. 21(4), 321-335
• JAHANBAKHSH, M., FARID, A. AKHAVAN and LOTFI, MOHAMMAD, 2018. Optimal flank wear in turning of Inconel 625 super-alloy using ceramic tool PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 232(2), 208-216
• HAMIDREZA NAMAZI, ALI AKHAVAN FARID and CHANG TECK SENG, 2018. Fractal based analysis of the influence of cutting depth on complex structure of cutting forces in rough end milling Fractals. 26(5), 1850068
• HAMIDREZA NAMAZI, ALI AKHAVAN FARID and CHANG TECK SENG, 2018. COMPLEXITY-BASED ANALYSIS OF THE INFLUENCE OF TOOL GEOMETRY ON CUTTING FORCES IN ROUGH END MILLING Fractals: Complex Geometry, Patterns, and Scaling in Nature and Society. 26(5), 7
• NAMAZI, HAMIDREZA, FARID, ALI AKHAVAN and SENG, CHANG TECK, 2018. FRACTAL-BASED ANALYSIS OF THE VARIATIONS OF CUTTING FORCES ALONG DIFFERENT AXES IN END MILLING OPERATION FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY. 26(6),
• LOTFI, MOHAMMAD, ASHRAFI, HOSSEIN, AMINI, SAEID, FARID, A. AKHAVAN and JAHANBAKHSH, M., 2017. Characterization of various coatings on wear suppression in turning of Inconel 625: A three-dimensional numerical simulation PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY. 231(6), 734-744
• NAMAZI, HAMIDREZA, KHOSROWABADI, REZA, HUSSAINI, JAMAL, HABIBI, SHAGHAYEGH, FARID, ALI AKHAVAN and KULISH, VLADIMIR V., 2016. Analysis of the influence of memory content of auditory stimuli on the memory content of EEG signal ONCOTARGET. 7(35), 56120-56128
• LOTFI, MOHAMMAD, JAHANBAKHSH, M. and FARID, A. AKHAVAN, 2016. Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis TRIBOLOGY INTERNATIONAL. 99, 107-116
• LOTFI, MOHAMMAD, FARID, ALI AKHAVAN and SOLEIMANIMEHR, HAMID, 2016. A new hybrid model based on the radius ratio for prediction of effective cutting limit of chip breakers PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 230(8), 1417-1427
• LOTFI, MOHAMMAD, FARID, ALI AKHAVAN and SOLEIMANIMEHR, HAMID, 2015. The effect of chip breaker geometry on chip shape, bending moment, and cutting force: FE analysis and experimental study INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 78(5-8), 917-925
• ASHRAFI, S. ALIZADEH, SHARIF, S., FARID, A. AKHAVAN and YAHYA, M. Y., 2014. Performance evaluation of carbide tools in drilling CFRP-Al stacks JOURNAL OF COMPOSITE MATERIALS. 48(17), 2071-2084
• 2013. Effects of Cutting Condition on Surface Roughness when Turning Untreated and Sb-Treated Al-11% Si Alloys Using PVD Coated Tools 315, 413-417
• FARID, ALI AKHAVAN, SHARIF, SAFIAN, ASHRAFI, SINA ALIZADEH and IDRIS, MOHD HASBULLAH, 2013. Statistical analysis, modeling, and optimization of thrust force and surface roughness in high-speed drilling of Al-Si alloy PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 227(6), 808-820
• SHARIF, S., FARID, A. AKHAVAN and IDRIS, M. H., 2012. Tool life prediction model of uncoated carbide tool in high speed drilling of Al-Si alloy using response surface methodology INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING. 6(1-2), 112-121
• FARID, ALI AKHAVAN, SHARIF, SAFIAN and IDRIS, MOHD HASBULLAH, 2011. Chip morphology study in high speed drilling of Al-Si alloy INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 57(5-8), 555-564
• FARID, A. AKHAVAN, SHARIF, S. and IDRIS, M. H., 2011. Surface integrity study of high-speed drilling of Al-Si alloy using HSS drill PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 225(B7), 1001-1007