Faculty of Engineering
   
   
  
 

Image of Jianfeng Li

Jianfeng Li

Senior Research Fellow, Faculty of Engineering

Contact

Biography

Jianfeng Li is a member of the Power Electronics, Machines and Control research group.

Research Summary

Advanced joining materials and technologies for high performance and lost cost power electronics

Selected Publications

Past Research

Tribilogy

Thermal sprayed coatings

Laser processing of materials

Liquid solder jonts for high temperature applications

  • LI, JIANFENG, CASTELLAZZI, A., ELEFFENDI, M.A., GURPINAR, E., JOHNSON, C.M. and MILLS, L., 2018. A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module IEEE Transactions on Power Electronics. 33(3), 2494 - 2508
  • LI, JIANFENG, CASTELLAZZI, A., ELEFFENDI, M.A., GURPINAR, E., JOHNSON, C.M. and MILLS, L., 2017. A Physical RC Network Model for Electro-Thermal Analysis of a Multichip SiC Power Module IEEE Transactions on Power Electronics.
  • LI, JIANFENG, YAQUB, I., CORFIELD, M. and JOHNSON, C.M., 2017. Interconnect Materials Enabling IGBT Modules to Achieve Stable Short Circuit Failure Behavior IEEE Transactions on Components, Packaging and Manufacturing Technology.
  • BILLORE, J., HASCOËT, S., ROBUTEL, R., BUTTAY, C. and LI, JIANFENG, 2017. Sintered-Silver Bonding of High-Temperature Piezoelectric Ceramic Sensors IEEE Transactions on Components, Packaging and Manufacturing Technology.
  • ARJMAND, E., AGYAKWA, P.A., CORFIELD, M., LI, J. and JOHNSON, C.M., 2016. Predicting Lifetime of Thick Al Wire Bonds Using Signals Obtained From Ultrasonic Generator IEEE Transactions on Components, Packaging and Manufacturing Technology. (In Press.)
  • MOUAWAD, B., LI, J., CASTELLAZZI, A. and JOHNSON, C.M., 2016. Hybrid half-bridge package for high voltage application In: 28th International Symposium on Power Semiconductor Devices and ICs, ISPSD 2016.
  • ARJMAND, E., AGYAKWA, P.A., CORFIELD, M., LI, JIANFENG, MOUAWAD, B. and JOHNSON, C.M., 2016. A thermal cycling reliability study of ultrasonically bonded copper wires Microelectronics Reliability. 59, 126-133
  • MOUAWAD, B., LI, JIANFENG, CASTELLAZZI, A., FRIEDRICHS, P. and JOHNSON, C.M., 2016. Low parasitic inductance multi-chip SiC devices packaging technology In: 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe).
  • MOUAWAD, B., LI, JIANFENG, CASTELLAZZI, A. and JOHNSON, C.M., 2016. Reliable integration of a high performance multi-chip half-bridge SiC power module In: 6th Electronics System-Integration Technology Conference (ESTC’16).
  • JIANFENG LI, CHRISTOPHER MARK JOHNSON, CYRIL BUTTAY, WISSAM SABBAH, STÉPHANE AZZOPARDI, 2015. Bonding strength of multiple SiC die attachment prepared with sintering of Ag nanoparticles Journal of Materials Processing Technology. 215, 299-308
  • YAQUB, I., LI, J. and JOHNSON, C.M., 2015. Dependence of overcurrent failure modes of IGBT modules on interconnect technologies Microelectronics Reliability. 55(12), 2596-2605
  • LI, JIANFENG, JOHNSON, C.M., BUTTAY, C., SABBAH, W. and AZZOPARDI, S., 2015. Bonding strength of multiple SiC die attachment prepared by sintering of Ag nanoparticles Journal of Materials Processing Technology. 215(1), 299-308
  • LI, J., GURPINAR, E., LOPEZ-AREVALO, S., CASTELLAZZI, A. and MILLS, L., 2014. Built-in reliability design of a high-frequency SiC MOSFET power module In: 7th International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014.
  • YUN WANG, JIANFENG LI, PEARL AGYAKWA, CHRISTOPHER MARK JOHNSON, SHUGUANG LI, 2014. Surface profiles of printed Ag nanoparticle paste and their implication on the quality of sintered joints In: Proceedings of the 7th International Conference on Integrated Power Electronics Systems. 193-199
  • JIANFENG LI, IMRAN YAQUB, MARTIN CORFIELD, PEARL AGYAKWA, CHRISTOPHER MARK JOHNSON, 2014. Comparison of thermo-mechanical reliability of high-temperature bonding materials for attachment of SiC devices In: Proceedings of the 7th International Conference on Integrated Power Electronics Systems. 489-495
  • JIANFENG LI, PEARL AGYAKWA, PAUL EVANS, CHRISTOPHER MARK JOHNSON, YIMIN ZHAO, YIBO WU, KIM EVANS, 2014. Packaging / assembling technologies for a high performance SiC-based planar power module In: Greener Aviation Conference.
  • J.F. LI, P.A. AGYAKWA, C.M. JOHNSON, 2014. Interdiffusion coefficients of binary multiphase systems with consideration of variation in Molar volumes International Journal of Materials Engineering and Technology. 12(1), 25-36
  • ADANE SOLOMON, JIANFENG LI, ALBERTO CASTELLAZZI, CHRISTOPHER MARK JOHNSON, 2014. Integrated Half-Bridge Switch using 70μm Thin Devices and Hollow Interconnects IEEE Transactions on Industry Applications.
  • LI, J., CASTELLAZZI, A., DAI, T., CORFIELD, M., SOLOMON, A.K. and JOHNSON, C.M., 2014. Built-in reliability design of highly integrated solid-state power switches with metal bump interconnects IEEE Transactions on Power Electronics. 30(5), 6895288
  • WANG, YUN, LI, JIANFENG, AGYAKWA, PEARL, JOHNSON, CHRISTOPHER MARK and LI, SHUGUANG, 2014. Quantitative Microstructure Characterization of Ag Nanoparticle Sintered Joints for Power Die Attachment MOLECULAR CRYSTALS AND LIQUID CRYSTALS. 604(1), 11-26
  • GURPINAR, E., LOPEZ-AREVALO, S., LI, J., DE, D., CASTELLAZZI, A. and MILLS, L., 2014. Testing of a lightweight SiC power module for avionic applications In: 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014.
  • CASTELLAZZI, A., DAI, T., LI, J., SOLOMON, A., TRENTIN, A. and WHEELER, P.W., 2013. Integrated matrix converter switch In: 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013. 525-530
  • SKURIAT, R., LI, J.F., AGYAKWA, P., MATTEY, N., EVANS, P. and JOHNSON, C.M., 2013. Degradation of thermal interface materials for high-temperature power electronics applications Microelectronics Reliability. (In Press.)
  • DAI, T., LI, J.F., CORFIELD, M.R., CASTELLAZZI, A. and WHEELER, P.W., 2013. Real-time degradation monitoring and lifetime estimation of 3D integrated bond-wire-less double-sided cooled power switch technologies In: 15th European Conference on Power Electronics and Applications (EPE-ECCE 2013).
  • LI, J.F., AGYAKWA, P.A. and JOHNSON, C.M., 2012. Effect of traceAl on growth rates of intermetallic compound layers between Sn-based solders and Cu substrate Journal of Alloys and Compounds. 545, 70-79
  • J.F. LI, A. CASTELLAZZI, A. SOLOMON and C.M. JOHNSON, 2012. Reliable Integration of Double-Sided Cooled Stacked Power Switches Based on 70 um Thin IGBTs and Diodes In: 7th International Conference on Integrated Power Electronics Systems. 131-136
  • PA AGYAKWA, MR CORFIELD, L YANG, JF LI, VMF MARQUES, C M JOHNSON, 2011. Microstructural evolution of ultrasonically bonded high purity Al wire during extended range thermal cycling Microelectronics Reliability. 51(2), 406-415
  • CYRIL BUTTAY, AMANDINE MASSON, JIANFENG LI, MARK JOHNSON, CHRISTOPHE RAYNAUD, HERVÉ MOREL MIHAI LAZAR, 2011. Die Attach of Power Devices Using Silver Sintering - Bonding Process Optimisation and Characterization In: The International Conference and Exhibition on High Temperature Electronics Network (HiTEN 2011), July 18-20, 2011, Oxford. pp 084-090 (In Press.)
  • LI, J.F., AGYAKWA, P.A. and JOHNSON, C.M., 2011. Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process Acta Materialia. 59(3), 1198-1211
  • CASTELLAZZI, A., SOLOMON, A., AGYAKWA, P., LI, J., TRENTIN, A. and JOHNSON, C. M., 2010. High power density, low stray inductance, double sided cooled matrix-converter type switch In: 2010 International Power Electronics Conference (IPEC).
  • MATTEY, N., SKURIAT, R., LI, J., AGYAKWA, P., EVANS, P. and JOHNSON, C.M., 2010. Thermal and mechanical design optimization of a pressure-mounted base-plate-less high temperature power module In: Electronic System-Integration Technology Conference (ESTC), 13-16 Sept. 2010.
  • AGYAKWA, P., CORFIELD, M., LI, J., JOHNSON, C., HOGG, S., LIOTTI, E. and LOH, W., 2010. Unusual Observations in the Wear-out of High Purity Aluminium Wire Bonds under Extended Range Passive Thermal Cycling IEEE Transactions on Device and Materials Reliability.
  • J.F. LI, P.A. AGYAKWA, C.M. JOHNSON, 2010. A fixed-grid numerical modelling of transient liquid phase bonding and other diffusion controlled phase changes Journal of Materials Science. 45(9), 2340-2350
  • J.F. LI, P.A. AGYAKWA, C.M. JOHNSON, D. ZHANG, T. HUSSAIN, D.G. MCCARTNEY, 2010. Characterization and solderability of cold sprayed Sn coatings on both Al and Cu substrates Surface and Coatings Technology. 204, 1395-1404
  • LI, J.F., AGYAKWA, P.A. and JOHNSON, C.M., 2010. Kinetics of Ag3Sn growth in Ag-Sn-Ag system during transient liquid phase soldering process Acta Materialia. 58(9), 3429-3443
  • ADANE SOLOMON, ALBERTO CASTELLAZZI, RUTH HOYLAND, PEARL AGYAKWA, JIANFENG LI, MARK JOHNSON, 2009. A Highly Integrated High-Voltage Bi-Directional Switch In: ISDRS 2009. Paper 38
  • K. CHEN, C. LIU, D.C. WHALLEY, D.A. HUTT, J.F. LI, S.H. MANNAN, 2008. A comparative study of the interfacial reaction between electroless Ni–P coatings and molten tin Acta Materialia. 56(19), 5668-5676 (In Press.)
  • J.F. LI, S.H. MANNAN, M.P. CLODE, C. LIU, K. CHEN, D.C. WHALLEY, D.A. HUTT, P.P. CONWAY, 2008. Interfacial reaction between molten Sn-Bi based solders and electroless Ni-P coatings for liquid solder interconnects IEEE Transactions on Components and Packaging Technologies. 31(3), 574-585
  • J.F. LI, S.H. MANNAN, M.P. CLODE, C. JOHNSTON, A. CROSSLEY, 2007. Dissolution and interfacial reaction of Nb in contact with the molten 52In-48Sn solder Acta Materialia. 55(15), 5057-5071 (In Press.)
  • JIANFENG LI, FARHAD SARVAR, DAVID .C. WHALLEY, DAVID A. HUTT, MIKE P. CLODE, SAMJID H. MANNAN, 2007. Failure Mechanisms of Dummy IGBT Assembles Constructed Using Liquid In-Sn/Nb System In: Proceedings of 9th Electronics Packaging Technology Conference (EPTC 2007), Grand Copthorne Waterfront Hotel, Singapore, 10-12 December 2007. 43-46 (In Press.)
  • J.F. LI, S.H. MANNAN, M.P. CLODE, K. CHEN, D.C. WHALLEY, C. LIU, D.A. HUTT, 2007. Comparison of interfacial reactions of Ni and Ni-P in extended contact with liquid Sn-Bi based solders Acta Materialia. 55(2), 737-752
  • J.F. LI, S.H. MANNAN, M.P. CLODE, D.C. WHALLEY, D.A. HUTT, 2006. Interfacial reactions between molten Sn-Bi-X solders and Cu substrates for liquid solder interconnects Acta Materialia. 54(11), 2907-2922
  • J.F. LI, S.H. MANNAN, M.P. CLODE, 2006. Lifetime Of Solid Metals In Contact With Liquid Solders For High-Temperature Liquid Solder Assemblies Scripta Materialia. 54, 1773-1778 (In Press.)
  • K. CHEN, C. LIU, D.C. WHALLEY, D.A.C. HUTT, J.F. LI, S.H. MANNAN, 2006. Electroless Ni-W-P Alloys as Barrier Coatings for Liquid Solder Interconnects In: Proceedings of the 1st IEEE Electronic Systemintegration Technology Conference (ISBN: 1-4244-0553-X), Dresden, Germany, Sept 5 - 7, 2006. pp 421 – 427 (In Press.)
  • J.F. LI, S.H. MANNAN, M.P. CLODE, 2006. Edge effects in intermetallic compound crystal growth between Nb and molten 52In-48Sn solder Applied Physics Letters. 88, 104105-1-3 (In Press.)
  • JIANFENG LI, SAMJID H. MANNAN, MIKE P. CLODE, DAVID N. FENNER, DAVID .C. WHALLEY, KEMING CHEN, 2006. Reliability and failure analysis of dummy IGBT assembles using liquid solder joints under thermal cycling In: Proceedings of International Conference and Exhibition on High Temperature Electronics (HiTEC 2006), Santa Fe, USA, May 15-18, 2006. pp 390-397 (In Press.)
  • J.F. LI, H. LIAO, C.X. DING, C. CODDET, 2005. Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments Journal of Material Processing Technology. 160(1), 34-42 (In Press.)
  • J.F. LI, S.H. MANNAN, M.P. CLODE, H.M. LOBATO, C. LIU, D.C. WHALLEY, F.T. LAWRENCE, G. JACKSON, H. STEEN, 2005. Interactions Between Liquid Sn-Bi Based Solders with Contact Metals for High Temperature Applications In: Proceedings of the 55th Electronics Components and Technology Conference (ECTC'55, ISSN 0569-5503) , Lake Buena Vista, Fl, USA, 31st May 2005. pp 441-451 (In Press.)
  • JIANFENG LI, CHANGQING LIU, KEMING CHEN, SAMJID H. MANNAN, MIKE P. CLODE, DAVID C. WHALLEY, DAVID A. HUTT, PAUL P. CONWAY, 2005. Molten Solder Interconnects I: Evaluation of Sn-Bi-X / Cu systems and failure mechanisms of LGA assemblies In: Proceedings of HITEN 2005, 6-8 September 2005, Paris, France. (In Press.)
  • J.F. LI, L. LI, C.X. DING, 2005. Thermal diffusivity of plasma sprayed Cr3C2-NiCr coatings Materials Science and Engineering A: Structural Materials: Properties,Microstructures and Processing. 394(1-2), 229-237 (In Press.)
  • KEMING CHEN, JIANFENG LI, CHANGQING LIU, DAVID .C. WHALLEY, DAVID A. HUTT, PAUL P. CONWAY, SAMJID H. MANNAN, MIKE P. CLODE, H. LOBATO, 2005. Molten Solder Interconnects II: Reactions between Ni substrates and Sn-Bi based solders In: Proceedings of HITEN 2005, 6-8 September 2005, Paris, France. (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Statistical approach for minimizing cracks in combined flame spraying and laser surface modification of refractory ceramics Journal of the European Ceramic Society. 24(13), 3509-3520 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. A three-dimensional numerical model for convection-diffusion phase change process during laser melting of ceramic materials International Journal of Heat and Mass Transfer. 47(25), 5523-5539.
  • J.F. LI, L. LI, F.H. STOTT, 2004. Fractal characteristics of apparent pores present on polished cross sections of alumina coatings prepared by laser-assisted flame hybrid spraying Thin Solid Films. 453-454, 229-233 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials International Journal of Heat and Mass Transfer. 47(6-7), 1159-1174 (In Press.)
  • J.F. LI, X.Y. WANG, H. LIAO, C.X. DING, C. CODDET, 2004. Indentation analysis of plasma sprayed Cr3C2-NiCr coatings Journal of Materials Science. 39(23), 7111-7114 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Crystallographical analysis of surface layers of refractory ceramic formed using combined flame spray and simultaneous laser treatment Journal of the European Ceramic Society. 24(10-11), 3129-3138 (In Press.)
  • J.F. LI, H. LIAO, X.Y. WANG, C. CODDET, H. CHENG, C.X. DING, 2004. Plasma spraying of nanostructured partially yttria stabilized zirconia powders Thin Solid Films. 460, 101-115 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Predictions of flow velocity and velocity boundary layer thickness at surface during laser melting of ceramic materials Journal of Physics D: Applied Physics. 37, 1710-1717 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Multi-layered surface coatings of refractory ceramics prepared by combined laser and flame spraying Surface and Coatings Technology. 180-181, 499-504 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Thermal stresses and their implication on cracking during laser melting of ceramic materials, Acta Materialia. 52(14), 4385-4398 (In Press.)
  • J.F. LI, H. LIAO, X.Y. WANG, B. NORMAND, V. JI, C.X. DING, C. CODDET, 2004. Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder Tribology International. 37, 77-84 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2004. Combined laser and flame surface coating of refractory: phase and microstructure characteristics Thin Solid Films. 453-454, 67-71 (In Press.)
  • X.Y. WANG, J.F. LI, H. LIAO, C.X. DING, C. CODDET, 2003. Effect of a localized thermal treatment process on the electrochemical behaviour of thermally sprayed nickel-based alloy Surface and Coatings Technology. 166, 167-175 (In Press.)
  • JIANFENG LI, HANLIN LIAO, XIAOYAN WANG, CHRISTIAN CODDET, 2003. Fractal perimeters of polishing-Induced pull outs present on metallographic cross sections of plasma sprayed yttria stabilized zirconia coatings Journal of the American Ceramic Society. 86(11), 1906-1910 (In Press.)
  • J.F. LI, L. LI, F.H. STOTT, 2003. Surface modification of refractory ceramic using combined flame spraying and laser surface coating In: Proceedings of the 22nd International Congress on Applications of Lasers & Electro-Optics, October 13-16, 2003, Jacksonville, Florida, USA. P512 (In Press.)
  • J.F. LI, H. LIAO, B. NORMAND, C. CORDIER, G. MAURIN, J. FOCT, C. CODDET, 2003. Uniform design method for optimization of process parameters of plasma sprayed TiN coatings Surface and Coatings Technology. 176, 1-13 (In Press.)
  • JIANFENG LI, HANLIN LIAO, CHRISTIAN CODDET, 2002. Friction and wear behavior of flame-sprayed PEEK coatings Wear. 252, 824-831 (In Press.)
  • H.L. LIAO, J.F. LI, S. LAURENCE, C. CODDET, 2002. Mechanical properties and friction behavior of thermal spray PEEK coatings In: Zhang, Z.R. Zhou, J.J. Liu, M.H. Zhu (eds.), 3rd International Conference on Surface Engineering: Contributions of Surface Engineering to Modern Manufacturing and Remanufacturing, Chengdu, China, Oct 10-13, 2002. pp 150-156. (In Press.)
  • CHUANXIAN DING, JIANFENG LI, JI HENG, 2001. Mathematical model of microhardness of plasma-sprayed chromium oxide coating In: Ceramic Materials and Components for Engines, [Internatiol Symposium], 7th, Goslar, Germany, June 19-21, 2000, Wiley-VCH Verlag GmbH, Weinheim, Germany. pp 299-303. (In Press.)
  • JIANFENG LI, JINGQI HUANG, HENG JI, CHUANXIAN DING, 2001. Process optimization of microhardness of plasma sprayed Cr2O3 coating Journal of the Chinese Ceramic Society (in Chinese). 29(1), 49-53. (In Press.)
  • J.F. LI, C.X. DING, 2001. Characterization and tribological properties of electroless plated Ni-Co on plasma-sprayed Cr3C2-NiCr coating In: C. C. Berndt, K. A. Khor, E. F. Lugscheider (eds.), Thermal Spray 2001: New Surface for a New Millennium, ASM International, Materials Park, OH. pp 1099-1104 (In Press.)
  • JIANFENG LI, CHUANXIAN DING, 2001. Self-mated tribological properties of plasma-sprayed chromium carbide coating In: Ceramic Materials and Components for Engines, [International Symposium], 7th, Goslar, Germany, June 19-21, 2000, Wiley-VCH Verlag GmbH, Weinheim, Germany. pp 187-192 (In Press.)
  • J.F. LI, C.X. DING, 2001. Determining microhardness and elastic modulus of plasma-sprayed Cr3C2-NiCr coatings using Knoop indentation testing Surface and Coatings Technology. 135, 229-237 (In Press.)
  • JIANFENG LI, CHUANXIAN DING, 2001. Tribological properties of plasma-sprayed Cr3C2-NiCr coating against toughened SiC ceramics under water-lubricated sliding Tribology (in Chinese). 21(2), 90-93 (In Press.)
  • JIANFENG LI, CHUANXIAN DING, 2001. Tribological properties of plasma-sprayed Cr3C2-NiCr coating without or with electroless plated Ni Journal of Inorganic Materials (in Chinese). 16(1), 103-109. (In Press.)
  • J.F. LI, C.X. DING, 2000. Improvement in tribological properties of plasma-sprayed Cr3C2-NiCr coating followed by electroless Ni-based alloy plating Wear. 240, 180-185 (In Press.)
  • J.F. LI, C.X. DING, 2000. Improvement in properties of plasma-sprayed chromium carbide coating using Ni-clad Cr3C2 powders Surface and Coatings Technology. 130, 15-19 (In Press.)
  • J.F. LI, C.X. DING, 2000. Fractal character of circumferences of polishing-induced pull outs of plasma sprayed Cr3C2-NiCr coatings Thin Solid Films. 376(1-2), 179-182 (In Press.)
  • JIANFENG LI, CHUANXIAN DING, 2000. Study on Vickers hardness of plasma-sprayed Cr3C2-NiCr coatings Journal of the Chinese Ceramic Society (in Chinese). 28(3), 223-228 (In Press.)
  • J.F. LI, C.X. DING, 1999. Polished-induced pull outs of plasma-sprayed Cr3C2-NiCr coatings Journal of Materials Science Letters. 18, 1719-1721 (In Press.)
  • J.F. LI, C. X. DING, 1999. Statistical analysis of porosity variations in plasma-sprayed Cr3C2-NiCr coatings Journal of Materials Science Letters. 18, 1591-1593 (In Press.)
  • J.F. LI, C.X. DING, 1998. Crystalline orientation of plasma-sprayed TiO2 coatings Journal of Materials Science Letters. 17, 1747-1749 (In Press.)
  • JIANFENG LI, JINGQI HUANG, YEFANF ZHANG, CHUANXIAN DING, 1998. Tribological properties of plasma-sprayed coatings under water-lubricated sliding Journal of Inorganic Materials (in Chinese). 13(4), 514-520 (In Press.)
  • JIANFENG LI, CHUANXAIN DING, 1998. Statistical analysis of microhardness variation in plasma sprayed Cr3C2-NiCr coatings Journal of the Korean Vacuum Society. 7(S1), 171-178 (In Press.)
  • JIANFENG LI, JINGQI HUANG, SHOUHONG TAN, ZHONGMING CHENG, CHUANXIAN DING, 1998. Tribological properties of toughened SiC ceramics under water-lubricated sliding Journal of the Chinese Ceramic Society (in Chinese). 26(3), 305-312. (In Press.)
  • J. LI, Y ZHANG, J. HUANG, C. DING, 1998. Mechanical and tribological properties of plasma-sprayed Cr3C2-NiCr, WC-Co and Cr2O3 coatings Journal of Thermal Spray Technology. 7(2), 242-246 (In Press.)
  • J.F. LI, J.Q. HUANG, S.H. TAN, Z.M. CHENG, C.X. DING, 1998. Tribological properties of silicon carbide under water-lubricated sliding Wear. 218, 167-171 (In Press.)
  • C. DING, J. LI, L. ZHANG, X. YU, 1998. Wear evaluation of plasma sprayed oxide and carbide coatings In: C. Coddet (ed.), Thermal Spray: Meeting the Challenges of the 21st Century, ASM International, Materials Park, OH. pp 275-279. (In Press.)
  • J.F. LI, J.Q, HUANG, Y.F. ZHANG, C.X. DING, P.Y. ZHANG, 1998. Friction and wear behaviour of plasma-sprayed Cr3C2-NiCr against TiO2 coating under water- and ethanol-lubricated sliding Wear. 214, 202-206 (In Press.)
  • JIANFENG LI, XIANQIANG LI, CHUANXIAN DING, PINGYU ZHANG, 1997. Sliding friction and wear ofchromium carbide-nickel chromium coating against ceramic materials Journal of Zhengzhou University of Technology (in Chinese). 18(1), 17-23. (In Press.)
  • CHUANXIAN DING, JIANFENG LI, JINGQI HUANG, 1997. Tribological properties of plasma-sprayed chromium oxide coating against different materials In: 6th International Symposium on Ceramic Materials and Component for Engines, October 19-23 1997, Arita, Japan. pp 526-529. (In Press.)
  • J.F. LI, C.X. DING, J.Q. HUANG, P.Y. ZHANG, 1997. Wear mechanism of plasma-sprayed Cr3C2-NiCr against TiO2 coating Wear. 211, 177-184 (In Press.)
  • XIANQIANG LI, JIANFENG LI, CHUANXIAN DING, ZONGCHENG ZHANG, PINGYU ZHANG, 1996. Plasma sprayed Al2O3-TiO2 and Cr3C2-NiCr based coatings and their wear characteristics Journal of Zhengzhou University of Technology (in Chinese). 17(2), 11-16. (In Press.)
  • JIANFENG LI, WEIWEI DAI, CHUANXIAN DING, PINGYU ZHANG, 1996. Tribological properties of plasma-sprayed Cr3C2-NiCr coating Tribology (in Chinese). 16(1), 14-20. (In Press.)
  • W.W. DAI, C.X. DING, J.F. LI, Y.F. ZHANG, P.Y. ZHANG, 1996. Wear mechanism of plasma-sprayed TiO2 coating against stainless steel Wear. 196, 238-242 (In Press.)
  • CHUANXIAN DING, JIANFENG LI,, 1995. Plasma sprayed wear-resistant ceramic coatings Thermal Spray Technology (in Chinese). 1(1), 25-28 (In Press.)
  • JIANFENG LI, WEIWEI DAI, CHUANXIAN DING, 1995. Study on sliding wear of plasma-sprayed Cr3C2-NiCr coating Journal of the Chinese Nonferrous Metal (in Chinese). 9, 823-827. (In Press.)

Faculty of Engineering

The University of Nottingham
University Park
Nottingham, NG7 2RD



Contacts: Please see our 'Contact us' page