Gas Turbine and Transmissions Research Centre
  • Print
   
   

Publications

Content
HIBBERD, S., CARE, I., SIMMONS, K. and WANG, Y., 1999. CFD computation of air-oil separatin in an engine breather In: Proceedings IMechE Conference, CFD-Technical Developments and Future Trends, London, December, 1999.

Content
HACK, R. S. and BECKER, A. A., 1999. Frictional contact analysis under tangential loading using a local axes boundary element formulation International Journal of Mechanical Sciences. VOL 41(NUMBER 4/5), 419-436

Content
LEAHY, J. G. and BECKER, A. A., 1999. A quadratic boundary element formulation for three-dimensional contact problems with friction Journal of Strain Analysis for Engineering Design. VOL 34(NUMBER 4), 235-252

Content
EASTWICK, C.N., PICKERING, S.J. and AROUSSI, A., 1999. Comparisons of two commercial computational fluid dynamics codes in modelling pulverised coal combustion for a 2.5 MW burner Applied Mathematical Modelling. VOL 23(NUMBER 6), 437-446

Content
HIBBERD, S., SIMMONS, K. and EASTWICK, C., 1999. Mathematical modelling of an aero gas turbine bearing chamber In: Proceedings IMechE Conference, Concurrent Design and Manufacture of Aerospace Transmission Systems, Rolls-Royce, Derby, May 1999.

Content
EASTWICK, C.N., 1999. CFD Computation of Air-Oil Separation in an Engine Breather In: IMechE Seminar, Computational Fluid Dynamics: Technical Developments and Future Trends.

Content
EASTWICK, C.N., 1999. CFD Study of Droplet Motion in a Simplified Breather Chamber Geometry at High Shaft Rotating Speed In: 4th International Symposium on Multiphase Flow and Heat Transfer.

Content
WANG, Y., CARE, I., EASTWICK, C.N., HIBBERD, S. and SIMMONS, K.A., 1999. CFD Study of Droplet Motion in a Simplified Breather Chamber Geometry at High Shaft Rotating Speed Multiphase Flow and Heat Transfer: Proceedings of the 4th International Symposium, Xi'an, China, 22-24 August 1999. 250-257

Content
KENNEDY, A. R. and KARANTZALIS, A. E., 1999. The incorporation of ceramic particles in molten aluminium and the relationship to contact angle data Materials Science and Engineering A: Structural Materials: Properties,Microstructures and Processing. VOL 264(NUMBER 1/2), 122-129

Content
KENNEDY, A. R., KARANTZALIS, A. E. and WYATT, S. M., 1999. The microstructure and mechanical properties of-TiC and TiB~2-reinforced cast metal matrix composites Journal of Materials Science. VOL 34(NUMBER 5), 933-940

Content
KENNEDY, A.R., KARANTZALIS, A.E., WYATT, S.M., 1999. The microstructure and mechanical properties of TiC and TiB2-reinforced cast metal matrix composites Journal of Materials Science. 34(5), 933-940

Content
KENNEDY, A.R., KARANTZALIS, A.E., 1999. The incorporation of ceramic particles in molten aluminium and the relationship to contact angle data Materials Science and Engineering A. 264(1-2), 122-129

Content
STEWART, D.A., SHIPWAY, P.H. and MCCARTNEY, D.G., 1999. Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings Wear. VOL 225/229(NUMBER 2), 789-798

Content
SHIPWAY, P.H., 1999. Microabraision of Glass - The Interrelated Effects of Load and Abrasive Slurry Viscosity In: 21st Meeting of the IRG-OECD Group on Wear of Materials.

Content
SHIPWAY, P.H., 1999. The role of test conditions on the microabrasive wear behaviour of soda-lime glass WEAR -LAUSANNE-. VOL 233-235(NUMBER 1), 191-199
Displaying 1396 to 1410 of 1573
Previous 92 93 94 95 96 Next

Gas Turbine and Transmissions Research Centre

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:ez-g2trc@exmail.nottingham.ac.uk