Present and explain property reports - PRDRE22A
You're going to help a client find the perfect investment property, which means you have some property inspections to do and reports to write. Youll inspect two properties and identify the building style, construction type, current and projected market value, defects, enhancement measures to improve each property's value, preventive measures to protect property and cost benefits analysis for carrying out improvements to each property.
Apply basic food handling and safety practices
This unit focuses on basic food handling techniques. Topics
addressed include: the importance of identifying hazards and risks to seafood and
aquatic products within a food-processing shed; hygiene standards, procedures and
practices that need to be followed at food producing workplaces; the way fish
products are handled and stored, in particular, how temperature and packaging
effects the quality of the product; food safety during fish product processes with
the focus on
Meet workplace health and safety requirements
This unit covers a broad spectrum of issues related to safe
working practices in the aquaculture industry. Activity 1 covers basic occupational
health and safety legislation and its implications in the aquaculture workplace.
Activity 2 focuses on identifying safety hazards and risks at the aquaculture
workplace. It covers two main areas - the shed and the chemicals store. It also
covers actions that can be taken to remove or control the risks. Activity 3 covers
the proces
Advanced Quality Concepts: Trainers Guide
Trainers Guide. This unit is designed to help you meet the requirements of the module Advanced Quality Concepts. It has the following learning outcomes: Discuss the importance of quality, basic concepts of quality management and quality improvement and the links with productivity, economic advantage and standard of living. Discuss the characteristics and practices of customer focussed organisations. Identify and discuss various quality improvement models and apply quality improvement tools. Iden
3 Aims The aim of this section is to help you to think about how you study mathematics and consider ways in which you can make your study more effective.
5.4 Inspiratory drive The supply of oxygen to tissues such as the heart, liver and WAT is, under euthermic conditions, invariably linked to and dependent upon local blood flow and pulmonary function. However, as we have already seen, under conditions in which blood flow is reduced to a trickle, the control of energy supply switches to local adaptations in the capillaries and tissue cells, including the oxygen affinity of erythrocyte haemoglobin, the supply and metabolism of respiratory fuels and the rate of protei
Defining and assessing benefits for economic evaluation
43 PowerPoint slides from Richard Smith of the London School of Hygiene and Tropical Medicine on Defining and Assessing Benefits for Economic Evaluation, covering Why, what and how of benefits; Benefit assessment for CEA; Benefit assessment for CUA; Practical exercise in estimating benefits for CUA
Pharmaco-economic evaluation – benefits and outcomes
32 PowerPoint slides from Richard Smith of the London School of Hygiene and Tropical Medicine on Pharmaco-economic evaluation – benefits and outcomes, covering Identification, Measurement and Valuation.
Interdisciplinary Science Nanoscale Frontiers Student Document
In this module you will explore basic cell biology and cell imaging techniques. using quantum dots. You will also be introduced to the flow of genetic information through the cell, whereby the DNA inherited by an organism leads to specific traits by dictating the synthesis of proteins.
TALAT Lecture 2502: Material Aspects of Fire Design
This lecture gives information about characteristic behaviour of aluminium alloys and insulation materials at high temperatures; it describes the philosophy of using aluminium alloy structures under risks of fire; it gives an example of fire risk analysis. General engineering background and some familiarity with TALAT lecture 2501 is assumed.
Low magnification SEM image of open cell polyurethane foam
If a gas is injected into a liquid it forms a cellular foam structure. When a thermoset prepolymer of low viscosity is foamed, the polymer can drain from the cell walls (driven by surface tension) before it sets at the cell edges, leaving an open-celled foam. The cell edges have three concave sides, giving rise to the tri-cuspid cross section visible at the bottom of this image. The average co-ordination number for the nodes (where struts meet) is four, giving tetrahedral junctions.
X-ray tomography image of open cell polyurethane foam
If a gas is injected into a liquid it forms a cellular foam structure. When a thermoset prepolymer of low viscosity is foamed, the polymer can drain from the cell walls (driven by surface tension) before it sets at the cell edges, leaving an open-celled foam. The cell edges have three concave sides. The average co-ordination number for the nodes (where struts meet) is four, giving tetrahedral junctions. The deformation behaviour of the foam was observed by X-ray microtomography at the ESRF in Gr
Open celled aluminium foam produced by infiltration of sintered salt
This is an inexpensive route for the production of open celled foams. It allows a high degree of control over cell size and shape, and results in relatively uniform morphology. The interconnectivity of pores can be controlled by varying the degree of sintering of the precursor.
Fe, C 1.0 (wt%), hypereutectoid alloy
This secondary electron SEM image shows the cementite delineating prior austenite grain boundaries with a thin layer. The amount of proeutectoid phase is very low, with the majority of the area being taken by the pearlite eutectoid. Again each pearlite cell has a different orientation with the ferrite phase being selectively etched.
Poly (lactic-co-glycolic acid) (PLGA) porous scaffold for tissue engineering. Enlargement of a Pore.
The patients own cells are seeded onto the scaffold and allowed to attach and start producing new bone. The construct is implanted into the defect site, where eventually the polymer will biodegrade and be completely removed, leaving a natural autogenous bone graft. This technique is particularly useful for large defects, or where the host bed is compromised due to disease, although it is still at the research stage. Average Pore Size 350-550 micrometre, porosity estimated at 35-45%.
Alporas' closed cell aluminium foam
Additions are made to molten aluminium or aluminium alloy to modify the melt viscosity and make it suitable for foaming. 1 to 3 wt% titanium hydride is then added to the melt, and this foams the melt by releasing hydrogen. The foamed melt solidifies to yield a closed cellular structure with an average cell size of 4.5 mm
Resistance spot weld in T3
Macrograph of a resistance spot weld made in two plates of 1,5 mm thickness. T3 - solution heat treatment, cold working and natural ageing. AA2024-T3 RSW x40 Keller's reagent interferential contrast Base material characterised by elongated, plastically deformed grains. Presence of dendritic grains in the weld. The line on the left is the original plates separation line. The two short lines on the right (inside the weld) are solidification cracks.
Fe, C 1.0 (wt%), hypereutectoid alloy
This secondary electron SEM image shows the cementite delineating prior austenite grain boundaries with a thin layer. The amount of proeutectoid phase is very low, with the majority of the area being taken by the pearlite eutectoid. Again each pearlite cell has a different orientation with the ferrite phase being selectively etched.
Poly (lactic-co-glycolic acid) (PLGA) porous scaffold for tissue engineering.
The patients own cells are seeded onto the scaffold and allowed to attach and start producing new bone. The construct is implanted into the defect site, where eventually the polymer will biodegrade and be completely removed, leaving a natural autogenous bone graft. This technique is particularly useful for large defects, or where the host bed is compromised due to disease, although it is still at the research stage. Average Pore Size 350-550 micrometre, porosity estimated at 35-45%.
Poly (lactic-co-glycolic acid) (PLGA) porous scaffold for tissue engineering.
The patients own cells are seeded onto the scaffold and allowed to attach and start producing new bone. The construct is implanted into the defect site, where eventually the polymer will biodegrade and be completely removed, leaving a natural autogenous bone graft. This technique is particularly useful for large defects, or where the host bed is compromised due to disease, although it is still at the research stage. Average Pore Size 350-550 micrometre, porosity estimated at 35-45%.
