Advanced Materials Research Group
  • Print
   
   

Publications

Content
DALEY, P. J., WILLIAMS, O., HENG PANG, C., WU, T. and LESTER, E., 2019. The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour: Fuel Fuel. 251, 779-788

Content
CLARK, I., SMITH, J., GOMES, R. L. and LESTER, E., 2019. Continuous Synthesis of Zn2Al-CO3 Layered Double Hydroxides for the Adsorption of Reactive Dyes from Water: Journal of Environmental Chemical Engineering Journal of Environmental Chemical Engineering. 7(3),

Content
WILLIAMS, O., URE, A., STEVENS, L., BINNER, E., DODDS, C., KINGMAN, S., DAS, B., DASH, P. S. and LESTER, E., 2019. Formation of metallurgical coke within minutes through coal densification and microwave energy: Energy and Fuels Energy and Fuels. 33(7), 6817-6828

Content
YAN, Y., MENG, Y., TANG, L., KOSTAS, E. T., LESTER, E., WU, T. and PANG, C. H., 2019. Ignition and Kinetic Studies: The Influence of Lignin on Biomass Combustion: Energy and Fuels Energy and Fuels. 33(7), 6463-6472

Content
STIEBEROVA, B., ZILKA, M., TICHA, M., FREIBERG, F., CARAMAZANA-GONZÁLEZ, P., MCKECHNIE, J. and LESTER, E., 2019. Sustainability assessment of continuous-flow hydrothermal synthesis of nanomaterials in the context of other production technologies: Journal of Cleaner Production Journal of Cleaner Production. 241,

Content
CARRINGTON, M. J., DAURE, J., RATIA, V. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation: Materials and Design 164,

Content
RATIA, V. L., ZHANG, D., DAURE, J. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment: Wear Wear.

Content
KIRK, A. M., SHIPWAY, P. H., SUN, W. and BENNETT, C. J., 2019. Debris development in fretting contacts – Debris particles and debris beds: Tribology International Tribology International.

Content
KIRK, A. M., SHIPWAY, P. H., SUN, W. and BENNETT, C. J., 2019. Debris development in fretting contacts – Debris particles and debris beds: Tribology International Tribology International.

Content
QIN W., WANG M., SUN W., SHIPWAY P. H., L X., 2019. Modelling the effectiveness of oil lubrication in reducing both friction and wear in a fretting contact Wear. 426-427, 770-777

Content

Content
RATIA, V. L., ZHANG, D., CARRINGTON, M. J., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2019. Comparison of the sliding wear behaviour of self-mated HIPed Stellite 3 and Stellite 6 in a simulated PWR water environment: Wear Wear.

Content
REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science.

Content
REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science.
Displaying 31 to 45 of 3143
Previous 1 2 3 4 5 Next

Advanced Materials Research Group

Faculty of Engineering
The University of Nottingham
University Park
Nottingham, NG7 2RD



email:AdvMaterials@nottingham.ac.uk