Publications
This site is periodically updated. It was last updated in July 2018. For a full list of publications visit my Google Scholar site
Peer reviewed journal papers
Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating, Journal of Alloys and Compounds, J Wang, J Liu, N Neate, M Bai, F Xu, T Hussain, C Scotchford, X Hou
Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings, Materials & Design 148, 17-29, E Sadeghimeresht, L Reddy, T Hussain, M Huhtakangas, N Markocsan, S Joshi
Corrosion of cast Stellite-3 analogue in simulated PWR conditions, Corrosion Science, GN Karimi, PH Shipway, DA Stewart, T Hussain
Process parameter optimisation of laser clad iron based alloy: predictive models of deposition efficiency, porosity and dilution, Surface and Coatings Technology, L Reddy, SP Preston, PH Shipway, C Davis, T Hussain
Robust hydrophobic surfaces from suspension HVOF thermal sprayed rare-earth oxide ceramics coatings, Scientific reports 8 (1), 6973, M Bai, H Kazi, X Zhang, J Liu, T Hussain
Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700° C, Corrosion Science 135, 147-157, M Bai, L Reddy, T Hussain
Microstructure and wear behaviour of powder and suspension hybrid Al2O3–YSZ coatings, Ceramics International 44 (7), 8498-8504, JW Murray, A Leva, S Joshi, T Hussain
Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating, Corrosion, E Sadeghimeresht, N Markocsan, T Hussain, M Huhtakangas, S Joshi
Microstructure and phase stability of suspension high velocity oxy-fuel sprayed yttria stabilised zirconia coatings from aqueous and ethanol based suspensions, Journal of the European Ceramic Society 38 (4), 1878-1887, M Bai, H Maher, Z Pala, T Hussain
Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear, Journal of the European Ceramic Society 38 (4), 1819-1828, JW Murray, GA Rance, F Xu, T Hussain
High temperature chlorine-induced corrosion of Ni50Cr coating: HVOLF, HVOGF, cold spray and laser cladding, Surface and Coatings Technology 337, 357-369, B Song, KT Voisey, T Hussain
Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings, Corrosion Science 132, 170-184, E Sadeghimeresht, L Reddy, T Hussain, N Markocsan, S Joshi
Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear, Journal of Thermal Spray Technology 27 (1-2), 207-219, J Pulsford, S Kamnis, J Murray, M Bai, T Hussain
Heat treatment of cold-sprayed C355 Al for repair: microstructure and mechanical properties, Journal of Thermal Spray Technology 27 (1-2), 159-168, JW Murray, MV Zuccoli, T Hussain
Microstructural Evolution in Solution Heat Treatment of Gas-Atomized Al Alloy (7075) Powder for Cold Spray, Journal of Thermal Spray Technology 27 (1-2), 145-158, A Sabard, HL de Villiers Lovelock, T Hussain
Cold-Sprayed Metal Matrix Composite Coatings, Cold-Spray Coatings, 275-295, YTR Lee, T Hussain, GA Fisher, AG McDonald
Suspension high velocity oxy-fuel spraying of a rutile TiO2 feedstock: Microstructure, phase evolution and photocatalytic behaviour, Ceramics International, 43 (17), 15288-15295, M Bai, R Khammas, L Guan, JW Murray, T Hussain
Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700° C, Oxidation of Metals, 1-23, Z Pala, M Bai, F Lukac, T Hussain
HVOF and Laser-Cladded Fe–Cr–B Coating in Simulated Biomass Combustion: Microstructure and Fireside Corrosion, Oxidation of Metals 87 (5-6), 825-835L Reddy, P Shipway, C Davis, T Hussain
Cold sprayed metal-ceramic coatings using satellited powders, KS Al-Hamdani, Materials Letters 198, 184-187, JW Murray, T Hussain, A Kennedy, AT Clare,
Role of oxides and porosity on high temperature oxidation of HVOLF thermal sprayed Ni50Cr coatings, Journal of Thermal Spray Technology, B. Song, M Bai, K. T. Voisey, T. Hussain
Advanced diamond-reinforced metal matrix composites via cold spray: Properties and deposition mechanism, Composites Part B: Engineering, S. Yin, Y. Xie, J. Cizek, E. Ekoi, T. Hussain, D. Dowling, R. Lupoi
Suspension high velocity oxy-fuel spraying of TiO2: a quantitative approach to phase composition, Journal of the European Ceramic Society, 2017, 37 (2), 801-810, Z. Pala, E. Shaw, J.W. Murray, N. Senin, T. Hussain
Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, H. Chen, Z. Pala, T. Hussain, D. G. McCartney
Suspension High Velocity Oxy-Fuel (SHVOF)-sprayed alumina coatings: microstructure, nanoindentation and wear. Journal of Thermal Spray Technology, 2016, 25 (8), 1700-1710. 2016, J. Murray, A. Ang, Z. Pala, E. Shaw, T. Hussain
High temperature performance of ferritic steels in fireside corrosion regimes: temperature and deposits, Journal of Materials Engineering and Performance, 2017, 26 (1), 84- 93, T. Dudziak, T. Hussain, N. J. Simms
Laser Cladding of Ni50Cr: A Parametric and Dilution Study, Physics Procedia, 2016, 83, 706- 715, B. Song, K.T. Voisey, T. Hussain
Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: Microstructure and high temperature oxidation, Surface and Coatings Technology, B. Song, Z. Pala, K.T. Voisey, T. Hussain
A novel method for metal–diamond composite coating deposition with cold spray and formation mechanism, Scripta Materialia, 2016, 115: p. 10-13 Co-authors: B. Aldwell, S. Yin, K.A. McDonnell, D. Trimble, T. Hussain, R. Lupoi
High temperature oxidation of HVOF thermally sprayed NiCr- Cr3C2 coatings: microstructure and kinetics, Journal of Materials Science, 2015, 50 (20): p. 6808- 6821 Co-authors: Y. Ding, T. Hussain and D. G. McCartney
Fireside corrosion degradation of HVOF sprayed FeCrAl at 700- 800°C, Surface and Coatings Technology, 2015, 268: p.165- 172 Co-authors: T. Hussain, N.J. Simms and J.R. Nicholls, J.E. Oakey
Fireside corrosion degradation of 15Mo3, T22, T23 & T91 in simulated coal-biomass co-fired environment, Materials and Corrosion, 2015, 66 (9): p.839-850 Co-authors: T. Dudziak , T. Hussain, D. Orlicka, A. Pokrywa and N. J. Simms
Comparison Between Oxidation of Fe-Cr-Al Sputter Coatings in Air and Air-HCl environments at 550 °C, Materials at High Temperature, 2015, 32 (1-2): p. 167- 176 Co-authors: D. Orlicka, N.J. Simms, T. Hussain and J.R. Nicholls
Modelling Fireside Corrosion of Thermal Sprayed Coatings in Co-firing of Coal Biomass, Materials and Corrosion, 2014, 65 (2): p. 197- 205 Co-authors: T. Hussain, N. J. Simms and J. R. Nicholls
Fireside Corrosion Degradation of ferritic alloys at 600°C in oxy-fired conditions, Corrosion Science, 2014, 79: p. 184-191 Co-authors: T. Dudziak , T. Hussain, N. J. Simms, A. U. Syed and J.E. Oakey
Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties, Key Engineering Materials, Progress in Surface Treatment II, 2013. 533: p. 53-90 Author: T. Hussain
Fireside Corrosion of Superheater Materials in Coal/Biomass Co-fired Advanced Power Plants, Oxidation of Metals, 2013, 80 (5-6): p. 529- 540Co-authors: T. Hussain, A. U. Syed, N. J. Simms and J. E. Oakey
Fireside Issues in Advanced Power Generation Systems, Materials Science and Technology, 2013. 29 (7): p. 804- 812Co-authors: N.J. Simms, J. Sumner, T. Hussain and J. E. Oakey
Co-combustion of Cereal Co-Product (CCP) with a UK coal (Daw Mill): Combustion gas composition and deposition, Fuel, 2013. 112: p. 572- 583Co-authors: T. Hussain, A. H. M. Khodier, N. J. Simms and J.E. Oakey,
Fireside Corrosion Behaviour of HVOF & Plasma Sprayed Coatings in Advanced Coal/ Biomass Co-fired Power Plants, Journal of Thermal Spray Technology, 2013. 22 (5): p. 797- 807Co-authors: T. Hussain, T. Dudziak, N. J. Simms and J. R. Nicholls
Trends in Fireside Corrosion Damage to Superheaters in Air and Oxy-firing of Coal/ Biomass, Fuel, 2013. 113: p. 787- 797Co-authors: T. Hussain, A. U. Syed and N. J. Simms
Bonding Between Aluminium and Copper in Cold Spraying: Story of Asymmetry, Materials Science and Technology, 2012. 28(12): p.1371-1378Co-authors: T. Hussain, D. G. McCartney and P. H. Shipway
Microscopy of Fireside Corrosion on Superheater Materials for Oxy-fired Pulverised Fuel Power Plants, Materials at High Temperatures, 2012. 29 (3): p. 219- 228 Co-authors: A. U. Syed, T. Hussain, N. J. Simms and J. E. Oakey
Deposit formation and emissions from co-firing miscanthus with Daw Mill Coal: pilot plant experiments, Fuel, 2012. 101: p. 53-61Co-authors: A.H.M. Khodier, T. Hussain, N.J. Simms, J.E. Oakey and P.J. Kilgallon
Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings. Journal of Thermal Spray Technology, 2011. 20(4): p. 909-917Co-authors: T. Marrocco, T. Hussain, D. McCartney and P. Shipway
Impact Phenomena in Cold-spraying of Titanium onto Various Ferrous Alloys. Surface and Coatings Technology, 2011. 205: p. 5021-5027Co-authors: T. Hussain, D.G. McCartney and P.H. Shipway
Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits. Journal of Thermal Spray Technology, 2011. 20(1-2): p. 260- 274Co-authors: T. Hussain, D. G. McCartney, P. H. Shipway and T. Marrocco
Characterization and Solderability of Cold Sprayed Sn-Cu Coatings on Al and Cu Substrates. Surface and Coatings Technology, 2010. 204: p. 1395-1404Co-authors: J.F. Li, P.A. Agyakwa, C.M. Johnson, D. Zhang, T. Hussain and D.G. McCartney
Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components. Journal of Thermal Spray Technology, 2009. 18(3): p. 364-379Co-authors: T. Hussain, D.G. McCartney, P.H. Shipway and D. Zhang
Books
Characteristics of Feedstock Materials in Cold spray in Modern Cold Spray: Materials, Process, and Applications, Springer International Publishing, Switzerland, September, 2015, ISBN 978-3-319-16771-8 Co-authors: T. Hussain, S. Yue, C.–J. Li
Peer reviewed key conference papers
Steam oxidation of HVOF thermal sprayed Ni50Cr coating at 700 °C: microstructure and scale morphology, EPRI International Conference on Corrosion in Power Plants, 13- 15 October, (San Diego, USA)
Co-authors: B. Song, T. Hussain and K.T. Voisey
The effect of KCl on Fe-Cr-Al sputter coatings in the high temperature chloride environment at 550 °C, Eurocorr 2015, 6- 10 September 2015, (Graz, Austria)
Co-authors: D. Orlicka, N. J. Simms, T. Hussain and J.R. Nicholls
Fireside corrosion performance of NiCr coatings in simulated coal-biomass combustion environment, International Thermal Spray Conference and Exposition, C. Moreau, D. Puerta, 11-14 May 2015, (Long Beach, USA)
Co-authors: T. Hussain, N. J. Simms and J.R. Nicholls
Fireside Corrosion of Ni-based Alloys in Simulated Co-firing Combustion Environment, Baltica IX, International Conference on Life Management and Maintenance for Power Plants- New Tools and Solutions, 11- 13 June 2013, (Helsinki- Stockholm)
Co-authors: T. Hussain, N. J. Simms and J.E. Oakey
Fireside Corrosion of Superheater Materials in Oxy-fired Power Plants. Developing Solutions for the Global Challenge: EUROCORR, 4-8 September 2011, (Stockholm, Sweden), CD-ROM, p. 1062- 1078
Co-authors: A. U. Syed, T. Hussain, J. E. Oakey and N. J. Simms
Microscopy of Fireside Corrosion on Superheater Materials for Advanced Power Plants. 8th International Conference on Microscopy of Oxidation, G. J. Tatlock, H. E. Evans, 11-13 April 2011, (Liverpool, UK), Science Reviews 2000, p. 104- 113
Co-authors: A. U. Syed, T. Hussain, N. J. Simms and J. E. Oakey
Effect of Heat Treatment on Porosity and Corrosion Performance of Cold Sprayed Titanium Deposits. Thermal spray: Global Solutions for Future Application, Marple, B. R., Agarwal, A., Hyland, M. M., Lau, Y. -C., Li, C.-J., Lima, R. S., and Montavon, G., Eds., 3- 5 May 2010, (Singapore), ASM International, CD- ROM, p. 393-399
Co-authors: T. Hussain, D. G. McCartney, P. H. Shipway, and T. Marrocco
Characterisation of Corrosion Resistant Deposits by Cold Gas Dynamic Spray. Thermal spray: Global Solutions for Future Application, Marple, B. R., Agarwal, A., Hyland, M. M., Lau, Y. -C., Li, C.-J., Lima, R. S., and Montavon, G., Eds., 3- 5 May 2010, (Singapore), ASM International, CD-ROM, p. 496-501
Co-authors: T. Marrocco, D. Harvey, and T. Hussain
HVOF thermal sprayed Ni50Cr coating using gas fuelled and liquid-fuelled systems: microstructure and high temperature corrosion, 7th RIPT, 09-11 December 2015, (Limoges, France)
E.C. Shaw, Z. Pala, F. Wu, B. Song and T. Hussain, Suspension HVOF Sprayed TiO2 Coating: A Quantitative Approach To Phase Composition, 7th RIPT, 09-11 December 2015, (Limoges, France)
Co-authors: B. Song , Z. Pala, F. Wu , K. T. Voisey and T. Hussain
Fireside Corrosion of HVOF thermal sprayed and laser cladded Ni50Cr in biomass combustion environment, High Temperature Corrosion, Gordon Research Conference, 26-31 July 2015, (New London, NH)
Co-authors: B. Song, T. Hussain, K. T. Voisey and D. G. McCartney
Steam oxidation of 347HFG and Sanicro 25 at 700, 750 and 800 °C for USC boiler applications, 9th International Conference on Microscopy of Oxidation, G. J. Tatlock, H. E. Evans, 14-16 April 2014, (Nottingham, UK)
Co-authors: T. Hussain, N. J. Simms, J. E. Oakey and J.R. Nicholls
Fireside corrosion performance of FeCrAl coating at 700, 750 and 800 °C in simulated coal-biomass combustion environment for USC boilers, 6th RIPT, 11-13 December 2013, (Limoges, France)
Co-authors: T. Hussain, N. J. Simms, and J.R. Nicholls
Protection of Superheater Materials From Fireside Corrosion by Application of Thermal Sprayed Coatings in Coal/Biomass Co-fired Power Plants, EFC (European Federation of Corrosion) workshop: Beyond Single Oxidants-DECHEMA, 19- 21 September 2012, (Frankfurt am Main, Germany)
Co-authors: T. Hussain, N.J. Simms, J.E. Oakey and J.R. Nicholls
T. Hussain, A. H. M. Khodier and N. J. Simms, Co- combustion of Cereal Co-Product (CCP) with a UK Coal (Daw Mill): Combustion Gas Composition and Deposition, 9th European Conference on Coal Research and its Applications: ECCRIA9, University of Nottingham, 10- 12 September 2012, (Nottingham, UK)
T. Hussain, A. U. Syed and N. J. Simms, Trends in Fireside Corrosion Damage to Superheaters in Air and Oxy- firing of Coal/ Biomass, 9th European Conference on Coal Research and its Applications: ECCRIA9, University of Nottingham, 10- 12 September 2012, (Nottingham, UK)
T. Hussain, A. H. M. Khodier, N. J. Simms and J.E. Oakey, Pilot Plant Experiments of Cofiring Various Levels of Cereal Co-product (CCP) with El-Cerrejon Coal, International Energy Agency (IEA) Clean Coal Centre 2nd Workshop on Co-firing Biomass with Coal, 27- 28 March 2012, (Copenhagen, Denmark)
M. Asgaryan, N. J. Simms, T. Hussain, A. H. M. Khodier and S. Wu, Prediction of the Remaining Service Life of Heat Exchangers in Coal-Biomass Fired Power Plants, 7th International Conference on Modelling in Industrial Maintenance and Reliability, 18-19 April 2011, (Cambridge, UK)
A. U. Syed, T. Hussain, N. J. Simms and J. E. Oakey, Fireside Corrosion of Superheater Materials in Advanced Biomass/Coal Air- and Oxy-fired Power Plants, High Temperature Corrosion, Gordon Research Conference, 24-29 July 2011, (New London, NH)
T. Marrocco, T. Hussain, D. G. McCartney, P. H. Shipway, and, Corrosion Performance of Laser Post-treated Cold Sprayed Titanium Coatings, TSS: Cold Spray Conference, 27 – 28 Sep 2010, (Akron, Ohio USA), ASM International
T. Hussain, DG McCartney, PH Shipway, and T Marrocco Metal deposition for repair of titanium based components using cold gas dynamic spraying, Gas Turbines: High Temperature Coatings and Life Extension, 9-10 Dec 2009, The Institute of Materials, Minerals and Mining, (London, UK)