Mechanical and Aerospace Systems Research Group

Publications

Content
ALIYU, A.M., KIM, Y.K., CHOI, S.H., AHN, J.H. and KIM, K.C., 2017. Development of a dual optical fiber probe for the hydrodynamic investigation of a horizontal annular drive gas/liquid ejector Flow Measurement and Instrumentation. 56,

Content
ALIYU, A.M., ALMABROK, A.A., BABA, Y.D., ARCHIBONG, A.-E., LAO, L., YEUNG, H. and KIM, K.C., 2017. Prediction of entrained droplet fraction in co-current annular gas–liquid flow in vertical pipes Experimental Thermal and Fluid Science. 85,

Content
ALIYU, A.M., ALMABROK, A.A., BABA, Y.D., LAO, L., YEUNG, H. and KIM, K.C., 2017. Upward gas–liquid two-phase flow after a U-bend in a large-diameter serpentine pipe International Journal of Heat and Mass Transfer. 108,

Content
ALIYU, A.M., BABA, Y.D., LAO, L., YEUNG, H. and KIM, K.C., 2017. Interfacial friction in upward annular gas–liquid two-phase flow in pipes Experimental Thermal and Fluid Science. 84,

Content
BABA, Y.D., ARCHIBONG, A.E., ALIYU, A.M. and AMEEN, A.I., 2017. Slug frequency in high viscosity oil-gas two-phase flow: Experiment and prediction Flow Measurement and Instrumentation. 54,

Content
AMBROSE, S., LOWNDES, I.S., HARGREAVES, D.M. and AZZOPARDI, B., 2017. Numerical modelling of the rise of Taylor bubbles through a change in pipe diameter Computers and Fluids. 148, 10-25

Content
MAGNINI, M., BEISEL, A. M., FERRARI, A. and THOME, J. R., 2017. Pore-scale analysis of the minimum liquid film thickness around elongated bubbles in confined gas-liquid flows ADVANCES IN WATER RESOURCES. 109, 84-93

Content
FALSETTI, C., MAGNINI, M. and THOME, J. R., 2017. Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator PROCEEDINGS OF THE SIXTEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017. 736-743

Content
MAGNINI, M., FERRARI, A., THOME, J. R. and STONE, H. A., 2017. Undulations on the surface of elongated bubbles in confined gas-liquid flows PHYSICAL REVIEW FLUIDS. 2(8),

Content
FALSETTI, C., MAGNINI, M. and THOME, J. R., 2017. Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator JOURNAL OF ELECTRONIC PACKAGING. 139(3),

Content
MAGNINI, M. and THOME, J. R., 2017. An updated three-zone heat transfer model for slug flow boiling in microchannels INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 91, 296-314

Content
FERRARI, ANDREA, MAGNINI, MIRCO and THOME, JOHN R., 2017. A Flexible Coupled Level Set and Volume of Fluid (flexCLV) method to simulate microscale two-phase flow in non-uniform and unstructured meshes INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 91, 276-295

Content
FALSETTI, C., JAFARPOORCHEKAB, H., MAGNINI, M., BORHANI, N. and THOME, J. R., 2017. Two-phase operational maps, pressure drop, and heat transfer for flow boiling of R236fa in a micro-pin fin evaporator INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 107, 805-819

Content
M LI, FW SUN, RA BARRETT, E MEADE, DF LI, PE O’DONOGHUE, SB LEEN and NP O’DOWD, 2017. Influence of material inhomogeneity on the mechanical response of a tempered martensite steel Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 231(1-2), 14-22

Content
LI, ZHIHUI and ZHENG, XINQIAN, 2017. Review of design optimization methods for turbomachinery aerodynamics Progress in Aerospace Sciences. 93, 1-23
Displaying 541 to 555 of 1769
Previous … 35 36 37 38 39 … Next

Mechanical and Aerospace Systems Research Group

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:mas@nottingham.ac.uk