Mechanical and Aerospace Systems Research Group

Publications

Content
MOHAMMED, M.B., BENNETT, C.J., SHIPWAY, P.H. and HYDE, T.H., 2010. Optimization of heat transfer in the finite element process modelling of inertia friction welding of SCMV and AerMet 100 In: WIT Transactions on Engineering Sciences. 10. 253-265

Content
TANNER, D. W. J., BECKER, A. A. and HYDE, T. H., 2010. Creep and Low Cycle Fatigue Characterisation of IN718 TIG Butt-Welds at 620 degrees C ADVANCED MATERIALS FORUM V, PT 1 AND 2. 636-637, 1504-1510

Content
HYDE, T.H., SABER, M. and SUN, W., 2010. Testing and modelling of creep crack growth in compact tension specimens from a P91 weld at 650°C Engineering Fracture Mechanics. 77(15), 2946-2957

Content
HYDE, T. H., SABER, M. and SUN, W., 2010. Creep crack growth data and prediction for a P91 weld at 650 degrees C INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING. 87(12), 721-729

Content
YAGHI, A. H., HYDE, T. H., BECKER, A. A., SUN, W., HILSON, G., SIMANDJUNTAK, S., FLEWITT, P. E. J., PAVIER, M. J. and SMITH, D. J., 2010. A Comparison Between Measured and Modeled Residual Stresses in a Circumferentially Butt-Welded P91 Steel Pipe JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME. 132(1),

Content
HYDE, T. H., LI, R., SUN, W. and SABER, M., 2010. A simplified method for predicting the creep crack growth in P91 welds at 650 degrees C PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS. 224(L4), 208-219

Content
DESHPANDE, A. A., LEEN, S. B. and HYDE, T. H., 2010. Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. 19(4), 452-466

Content
HYDE, C. J., SUN, W., HYDE, T. H. and BECKER, A. A., 2010. THE EFFECT OF A STARTER NOTCH ON THE ISOTHERMAL AND THERMOMECHANICAL FATIGUE LIFE OF A NICKEL-BASED SUPERALLOY In: ASME Pressure Vessels & Piping Division / K-PVP Conference. 347-356

Content
HYDE, C. J., SUN, W., HYDE, T. H. and BECKER, A. A., 2010. THE EFFECT OF A STARTER NOTCH ON THE ISOTHERMAL AND THERMOMECHANICAL FATIGUE LIFE OF A NICKEL-BASED SUPERALLOY PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B. 347-356

Content
MOHAMMED, M. B., BENNETT, C. J., SHIPWAY, P. H. and HYDE, T. H., 2010. Optimization of heat transfer in the finite element process modelling of inertia friction welding of SCMV and AerMet 100 ADVANCED COMPUTATIONAL METHODS AND EXPERIMENTS IN HEAT TRANSFER XI. 68, 253-265

Content
GARVEY, S.D., 2010. Structural capacity and the 20 MW wind turbine Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 224(8), 1083-1115

Content
KALITA, K, KHOO, WKS, GARVEY, SD, HILL-COTTINGHAM, RJ, RODGER, D and EASTHAM, JF, 2010. Passive Contra-Magnetized Parallel-Airgap Serial Flux Magnetic Bearings Proceedings Of The Institution Of Mechanical Engineers Part C-Journal Of Mechanical Engineering Science. 224(C11), 2515-2524

Content
KHOO, WKS, KALITA, K, GARVEY, SD, HILL-COTTINGHAM, RJ, RODGER, D and EASTHAM, JF, 2010. Active Axial-Magnetomotive Force Parallel-Airgap Serial Flux Magnetic Bearings Ieee Transactions On Magnetics. 46(7), 2596-2602

Content
JEFFERSON-LOVEDAY RJ, TUCKER PG, 2010. LES of impingement heat transfer on a concave surface Numerical Heat Transfer.

Content
TUCKER, PAUL, EASTWOOD, SIMON, KLOSTERMEIER, CHRISTIAN, JEFFERSON-LOVEDAY, RICHARD, TYACKE, JAMES and LIU, YAN, 2010. HYBRID LES APPROACH FOR PRACTICAL TURBOMACHINERY FLOWS: PART 1-HIERARCHY AND EXAMPLE SIMULATIONS PROCEEDINGS OF THE ASME TURBO EXPO 2010: TURBOMACHINERY: AXIAL FLOW FAN AND COMPRESSOR AERODYNAMICS DESIGN METHODS, AND CFD MODELING FOR TURBOMACHINERY, VOL 7, PTS A-C. 997-1009
Displaying 1021 to 1035 of 1769
Previous … 67 68 69 70 71 … Next

Mechanical and Aerospace Systems Research Group

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:mas@nottingham.ac.uk