3.1 Introduction

In this section I would like to look at a complete play script to examine how ethics and ethical issues are dealt with. I've chosen this particular play because Katie Hims, the author, is particularly good at writing natural sounding dialogue, and this ‘naturalness’ is something that is sometimes missing in some scenarios specifically created to illustrate ethical questions within technological contexts. The play was originally written for and broadcast on the BBC Radio 4 as part of the C
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

7.3.6 Laser ablation deposition

Another close cousin to sputter deposition is laser ablation deposition. Ion bombardment of the target is replaced by a focused pulse of light from an ultraviolet laser. Although each pulse may carry only 1 J of energy, this is delivered within 1 ns to a 1 mm spot on the target surface. This represents an astonishing power density and the target surface explodes into vapour that can be caught on the waiting wafer surface. It is vital to scan the focus point across the target surface or you wi
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

3.6.1 Stiffness

Just how compliant does an AFM cantilever have to be to enable it to follow the undulations in a surface on an atomic scale? How can we find out? It turns out that this is easier than at first it seems.

A simple assumption we can make is that the compliance of the cantilever should be appreciably greater than that of a typical bond that holds atoms to one another. Here's one way in which a rough estimate of the stiffness (the force required to cause a given deflection) of the bonds in a
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

3.5.4 Other modes

The investigation of new scanning modes for the AFM has been something of a playground for researchers: think of any interaction between materials in which a force plays a part and you have a potential scanning mode. Coating the probe with a magnetic material, appropriately magnetised, enables samples to be scanned in magnetic-force mode. An obvious industrial use for this technique is the investigation of the structure of magnetic storage media. Electrostatic forces too have been used. Using
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

2.5 Review

The materials from which this simple sensor is made have been carefully chosen. They have had to be compatible with one another during the manufacturing process – so that for example, etching the material in one layer did not affect another material laid down previously. It had to be possible to shape them into the desired form, though some compromises also had to be struck. For instance, the V-groove trench is not the ideal geometry for the pit behind the beam but it is very easily made in
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

5.12 Pole and Stewart report

Apparently prepared using the same methodology as Law, Pole and Stewart produced a report that calculated the loads at various points in the bridge under live locomotive loads and wind loading at various pressures. Stewart was employed by Bouch to perform the original design calculations for the bridge, while Pole was brought in as an independent expert. He had extensive experience of use of different materials in bridges, and indeed, had written a standard text book for engineers on the subj
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

Acknowledgements

Except for third party materials and otherwise stated (see terms and conditions), this content is made available under a Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Licence

Grateful acknowledgement is made to the following sources for permission to reproduce material in this unit:

Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

5.1 Phase and phase difference

In this section I am considering sine waves that have the same frequency, but are out of step with each other.

Suppose we have two detectors at fixed points, A and B. At this moment in time A is in a high pressure region and B in a low pressure region. If we were to look again shortly later B would now in a high pressure region and A in a low pressure region. The pressures at A and B would be out of step with each other. The pressure variation at B is not in phase with that at A. The ex
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

3.2 Summary

The number of cycles of oscillation per second, both for a vibrating source and a pressure wave, is known as the frequency, symbol f Frequency is specified in hertz (Hz) or kilohertz (kHz). One hertz is one cycle per second; one kilohertz is one thousand cycles per second. Frequency and period are directly related. Frequency is the reciprocal of period:

Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

1.1 Music and technology

Music technology in one guise or another is part of everybody's life, because music is a part of almost everybody's life. For instance, if you are an instrumental performer of music, professional or not, then your instrument, be it the harp or the rock'n'roll drums, will be the result of considerable technological expertise on the part of the instrument maker. On the other hand, if you are not a performer but like to listen to music, the chances are that most of your listening is done via a h
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

5.9 Developing other systems methods

There are many more methods that are regarded as systems approaches for managing complexity (e.g. Rosenhead, 1989a; Flood and Carson, 1988; Flood and Jackson, 1991; Mingers and Gill, 1997; Francois, 1997; Flood, 1999; Jackson, 2000). The systems practitioners responsible for developing these come from a varied background, but in the main their experiences are similar to those described for Checkland, Beer, Espejo and the T301 team. All wanted to be able either to take action that stakeholders
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

2.3 Taking responsibility for your own learning

Not much of this unit conforms to the traditional pattern I mentioned earlier – the theory-example-exercise pattern. In particular, you will find you are expected to discover much of it for yourself. Why is this? This is a legitimate question and deserves a full answer. One year, a student at a residential summer school complained I had not taught him properly. I was, he told me, an expert and so why did I not demonstrate how to tackle the problem he was working on and pass my expertise on
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

10.3.1 Cats eyes and road conditions

Sometimes the discontent comes from the fact that there isn't a product to satisfy a particular need. Percy Shaw was a road mender who was aware of the dangers of driving along unlit, often fog-bound, roads. One night in 1933 he was driving his car near his home in the north of England when his headlights were reflected in the eyes of a cat. This inspired him to invent the cat's-eye reflector that, when embedded at intervals in the centre of the road, reflected a vehicle's headlights and made
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

4.1 An explanation

I will now elaborate on my answer from Exercise 1. I'm doing this because my internet search revealed more than I've written in the above answer, and to show that the invention of the telephone and its use by consumers is not as plain and simple as you may think. You we
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

1 Part 1 Investigating the innovation process

In Part 1 I invite you to look around at the technological products in your home or at work and consider their development history and their impact on the lives of you and your family. I then define the key concepts associated with the process of invention, design, innovation and diffusion.


Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

Introduction

This unit aims to provide an understanding of invention, design, innovation and diffusion as ongoing processes with a range of factors affecting success at each stage. You will gain an understanding of the factors that motivate individuals and organisations to invent, and the creative process by which individuals come up with ideas for new inventions and designs, and you will gain an understanding of the obstacles that have to be overcome to bring an invention to market and the factors that i
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

1.1.3 Features of diagrams

As there is variety in the types of diagrams we can see and use we need to think more broadly about what diagrams are trying to represent. One distinction which follows on from the discussion above is:

  • Analogue representations: these diagrams look similar to the object or objects they portray. At their simplest they are photographs of real objects and at their most complicated they are colourful, fully labelled drawings of the inner workings o
    Author(s): The Open University

    License information
    Related content

    Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

5.8 Additional treatment

As a result of strict standards set by the EU Directive on the Quality of Drinking Water, it is now often necessary for drinking water to have further treatment to remove components such as nitrates and trace of organics.


Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

3.4.3 Simulated environmental tests

The investigators wanted to know about the fatigue properties of the component, to find a feasible explanation of why it took 39 years for the eye bar to break. They needed information on the several stress corrosion mechanisms that were possible in the material, including hydrogen embrittlement, the effects of sulphur compounds such as H2S (hydrogen sulphide) and the effects of moisture and salt. Notched eye-bar material was loaded to failure in various environments.

In fact
Author(s): The Open University

License information
Related content

Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share

2.1 Meanings of ‘imagination’

A natural starting point is to consider the ways in which ‘imagination’ and related terms such as ‘imagine’ and ‘image’ are used in everyday contexts.

Activity 1

  1. Imagine someone aski
    Author(s): The Open University

    License information
    Related content

    Except for third party materials and/or otherwise stated (see terms and conditions) the content in OpenLearn is released for use under the terms of the Creative Commons Attribution-NonCommercial-Share