Power Electronics and Machines Centre

PEMC Papers 2014

Journal Papers 

Díaz, M., Cárdenas, R., Rojas, F., Clare, J. 3-Phase 4-wire matrix converter-based voltage sag/ swell generator to test low-voltage ride through in wind energy conversion systems IET Power Electronics
Papini, L., Raminosoa, T., Gerada, D., Gerada, C. A high-speed permanent-magnet machine for fault-tolerant drivetrains IEEE Transactions on Industrial Electronics
Tarisciotti, L., Zanchetta, P., Watson, A., Bifaretti, S., Clare, J.C., Wheeler, P.W. Active DC voltage balancing PWM technique for high-power cascaded multilevel converters IEEE Transactions on Industrial Electronics
Jia, K. Christopher, E.; Thomas, D.; Sumner, M.; Bi, T. Advanced DC zonal marine power system protection IET Generation, Transmission & Distribution
Arumugam, P. , Hamiti, T. , Brunson, C. , Gerada, C.    Analysis of vertical strip wound fault-tolerant permanent magnet synchronous machines IEEE Transactions on Industrial Electronics
Musallam, M., Yin, C., Bailey, C., Johnson, C.M.  Application of coupled electro-thermal and physics-of-failure-based analysis to the design of accelerated life tests for power modules Microelectronics Reliability
Yang, L., Agyakwa, P.A., Johnson, C.M. Calibration of a novel microstructural damage model for wire bonds IEEE Transactions on Device and Materials Reliability
Bifaretti, S., Zanchetta, P., Lavopa, E. Comparison of two three-phase pll systems for more electric aircraft converters IEEE Transactions on Power Electronics
Feldman, R., Farr, E., Watson, A.J., Clare, J.C., Wheeler, P.W., Trainer, D.R., Crookes, R.W.   Dc fault ride-through capability and STATCOM operation of a HVDC hybrid voltage source converter IET Generation, Transmission and Distribution
Galea, M., Buticchi, G., Empringham, L., De Lillo, L., Gerada, C. Design of a high-force-density tubular motor  IEEE Transactions on Industry Applications
Cupertino, F., Pellegrino, G., Gerada, C. Design of synchronous reluctance motors with multiobjective optimization algorithms IEEE Tranactions on Industry Applications
Teerakawanich, N. , Johnson, C.M.    Design optimization of quasi-active gate control for series-connected power devices IEEE Transactions on Power Electronics
Safari, S. , Castellazzi, A. , Wheeler, P.    Experimental and analytical performance evaluation of sic power devices in the matrix converter IEEE Transactions on Power Electronics
Boglietti, A., Gerada, C., Cavagnino, A. High-speed electrical machines and drives IEEE Transactions on Industrial Electronics
Gerada, D., Mebarki, A., Brown, N.L., Gerada, C., Cavagnino, A., Boglietti, A. High-speed electrical machines: Technologies, trends, and developments IEEE Transactions on Industrial Electronics
Riedemann, J., Peña, R., Cárdenas, R., Blasco, R., Clare, J. Indirect matrix converter modulation strategies for open-end winding induction machine IEEE Latin America Transactions
Kakosimos, P.E., Sarigiannidis, A.G., Beniakar, M.E., Kladas, A.G., Gerada, C.   Induction motors versus permanent-magnet actuators for aerospace applications IEEE Transactions on Industrial Electronics
J.F. Li, P.A. Agyakwa, C.M. Johnson Interdiffusion coefficients of binary multiphase systems with consideration of variation in Molar volumes International Journal of Materials Engineering and Technology
Vazquez, S., Leon, J.I., Franquelo, L.G., Rodriguez, J., Young, H.A., Marquez, A., Zanchetta, P. Model predictive control: A review of its applications in power electronics IEEE Industrial Electronics Magazine
Arumugam, P., Dusek, J., Mezani, S., Hamiti, T., Gerada, C. Modeling and analysis of eddy current losses in permanent magnet machines with multi-stranded bundle conductors Mathmatics and Computers in Simulation
T. Yang, S. Bozhko, and G. M. Asher Modelling of Uncontrolled Rectifiers Using the Dynamic phasor Approach IET Transactions on Power Electronics
Tarisciotti, L., Zanchetta, P., Watson, A., Bifaretti, S., Clare, J.C. Modulated model predictive control for a seven-level cascaded h-bridge back-to-back converter IEEE Transactions on Industrial Electronics
Wang, X. , Castellazzi, A. , Zanchetta, P.    Observer based temperature control for reduced thermal cycling in power electronic cooling Applied Thermal Engineering
Townsend, C.D., Summers, T.J., Vodden, J., Watson, A.J., Betz, R.E., Clare, J.C. Optimization of switching losses and capacitor voltage ripple using model predictive control of a cascaded H-bridge multilevel statcom IEEE Transactions on Power Electronics
Supono, I., Urresti, J., Castellazzi, A., Flores, D. Overload robust IGBT design for SSCB application Microelectronics Reliability
N. Lophitis, J. Vobecky, M. Arnold, T. Wikström, I. Nistor, M. Antoniou, and F. Udrea Parameters influencing the maximum controllable current in gate commutated thyristors IET Circuits, Devices & Systems
Lina, W., Kun, X., De Lillo, L., Empringham, L., Wheeler, P. PI controller relay auto-tuning using delay and phase margin in PMSM drives Chinese Journal of Aeronautics
Trentin, A. , Zanchetta, P., Wheeler, P., Clare, J.   Power conversion for a novel AC/DC aircraft electrical distribution system IET Electrical Systems in Transportation
Wang, Y., Li, J., Agyakwa, P., Johnson, C.M., Li, S. Quantitative Microstructure Characterization of Ag Nanoparticle Sintered Joints for Power Die Attachment Molecular Crystals and Liquid Crystals
Sumner, M., Abusorrah, A., Thomas, D., Zanchetta, P. Real time parameter estimation for power quality control and intelligent protection of grid-connected power electronic converters IEEE Transactions on Smart Grid
Espina, J.,  Ortega, C.,  De Lillo, L.,  Empringham, L.,  Balcells, J.c,  Arias, A. Reduction of output common mode voltage using a novel SVM implementation in matrix converters for improved motor lifetime IEEE Transactions on Industrial Electronics
Arjmand, E. , Agyakwa, P.A., Johnson, C.M.  Reliability of thick Al wire: A study of the effects of wire bonding parameters on thermal cycling degradation rate using non-destructive methods Microelectronics Reliability
Ji, C., Zanchetta, P., Carastro, F., Clare, J. Repetitive control for high-performance resonant pulsed power supply in radio frequency applications IEEE Transactions on Industry Applications
Giuliani, F. , Dipankar, D., Delmonte, N., Castellazzi, A., Cova, P.   Robust snubberless soft-switching power converter using SiC power MOSFETs and bespoke thermal design Microelectronics Reliability
Odhano, S.A.,  Giangrande, P.,  Bojoi, R.I.,  Gerada, C. Self-commissioning of interior permanent- magnet synchronous motor drives with high-frequency current injection IEEE Transactions on Industry Applications
Nicola Bianchi ; Michele Degano ; Emanuele Fornasiero Sensitivity Analysis of Torque Ripple Reduction of
Synchronous Reluctance and Interior PM Motors		 IEEE Transactions on Industry Applications 
Fayyaz, A.,  Yang, L.,  Riccio, M.,  Castellazzi, A.,  Irace, A. Single pulse avalanche robustness and repetitive stress ageing of SiC power MOSFETs Microelectronics Reliability
Effah, F.B.; Wheeler, P.; Clare, J.; Watson, A.  Space-Vector-Modulated Three-Level Inverters With a Single Z-Source Network IEEE Transactions on Power Electronics
Sanchez, S. , Molinas, M., Degano, M., Zanchetta, P. Stability evaluation of a DC micro-grid and future interconnection toan AC system Renewable Energy
Li, J.F. , Agyakwa, P.A., Johnson, C.M. Suitable thicknesses of base metal and interlayer, and evolution of phases for Ag/Sn/Ag transient liquid-phase joints used for power die attachment Journal of Electronic Materials
Wheeler, P. ,  Bozhko, S.  The more electric aircraft: Technology and challenges IEEE Electrification Magazine

 

Conference Papers

T. Yang, S. Bozhko, G. Asher Modelling of Electrical Power Systems with Dynamic Phasors in Modelica 10th International Modelica Conference
Papadopoulos, S. ; Rashed, M. ; Klumpner, C. ; Wheeler, P.,  A hybrid converter for medium voltage using a low-voltage current source active filter connected via a series capacitor 16th European Conference on Lappeenranta
P. Kulsangcharoen, C. Klumpner. M. Rashed. G. Asher Assessing the accuracy of loss estimation methods for supercapacitor energy storage devices operating under constant power cycling 16th European Conference on Lappeenranta
Riedemann, J., Pena, R., Cárdenas, R., Rivera, M., Blasco-Gimenez, R., Clare, J., Wheeler, P. Control of an open-end winding induction machine via a two-output indirect matrix converter APEC 2014 - 29th Annual IEEE Applied Power Electronics Conference and Exposition
P. L. Evans, A. Castellazzi, C. M. Johnson A Multi-Disciplinary Virtual Prototyping Design Tool for Power Electronics CIPS 2014 - 8th International Conference on  Integrated Power Electronics Systems
P. A. Agyakwa, L. Yang, M. R. Corfield, C. M. Johnson A non-destructive study of crack development during thermal cycling of Al wire bonds using x-ray computed tomography  CIPS 2014 - 8th International Conference on  Integrated Power Electronics Systems
J. Li, I. Yaqub, M. Corfield, P. A. Agyakwa, C. M. Johnson Comparison of thermo-mechanical reliability of high-temperature bonding materials for attachment of SiC devices CIPS 2014 - 8th International Conference on  Integrated Power Electronics Systems
Y. Wang, J. Li, P. Agyakwa, C. M. Johnson, S. Li Surface Profiles of Printed Ag Nanoparticle Paste and Their Implication on the Quality of Sintered Joints CIPS 2014 - 8th International Conference on  Integrated Power Electronics Systems
A. Eleffendi, C. M. Johnson Thermal path integrity monitoring for IGBT Power Electronics Modules CIPS 2014 - 8th International Conference on  Integrated Power Electronics Systems
Gurpinar, E., De, D., Castellazzi, A., Barater, D., Buticchi, G., Francheschini, G. Performance analysis of SiC MOSFET based 3-level ANPC grid-connected inverter with novel modulation scheme COMPEL 2014 - 15th Workshop on Control and Modeling for Power Electronics
Cao, Y. , Li, J., Sumner, M., Christopher, E., Thomas, D.W.P. A new double-ended approach to the series arc fault location DPSP 2014 - 12th IET International Conference on Developments in Power System Protection
Li, J. , Thomas, D.W.P., Sumner, M., Christopher, E., Cao, Y. DC series arc generation, characteristic and modelling with arc demonstrator and shaking table DPSP 2014 - 12th IET International Conference on Developments in Power System Protection
C. Rose, D. Thomas, M. Sumner, E. Christopher, S. L. Arevalo  Impedance based intelligent fault location for zonal power systems DPSP 2014 - 12th IET International Conference on Developments in Power System Protection
Rose, C. , Thomas, D., Sumner, M., Christopher, E., Arevalo, S.L. Intelligent impedance based fault-location for zonal power systems DPSP 2014 - 12th IET International Conference on Developments in Power System Protection
Papadopoulos, S. ; Rashed, M. ; Klumpner, C. ; Wheeler, P.,  A hybrid inverter system for medium voltage applications using a low voltage auxiliary CS ECCE 2014 - IEEE Energy Conversion Congress and Exposition
Goodman, A.,  Watson, A.,  Dey, A.,  Clare, J.,  Wheeler, P.,  Zushi, Y. DC side ripple cancellation in a cascaded multi-level topology for automotive applications ECCE 2014 - IEEE Energy Conversion Congress and Exposition
Shao, S. ,  Clare, J.C.,  Watson, A.J.,  Wheeler, P.W. Detection and isolation of multiple faults in a modular multilevel converter based on a sliding mode observer ECCE 2014 - IEEE Energy Conversion Congress and Exposition
Tarisciotti, L.,  Zanchetta, P.,  Watson, A.,  Clare, J.,  Bifaretti, S. Improving power quality with multi-objective modulated Model Predictive Control ECCE 2014 - IEEE Energy Conversion Congress and Exposition
Arif, B. ,  Tarisciotti, L.,  Zanchetta, P.,  Clare, J.,  Degano, M. Integrated grid inductance estimation technique for finite control set model predictive control in grid connected converters ECCE 2014 - IEEE Energy Conversion Congress and Exposition
Hill, C.I. , Zanchetta, P. , Okaeme, N.A., Bozhko, S.V. Continuous, non-linear, optimal speed control of a Distributed Generation Power Pack using Artificial Neural Networks ENERGYCON 2014 - IEEE International Energy Conference
Riedemann, J.a,  Peña, R. ,  Cárdenas, R.,  Clare, J.,  Wheeler, P.,  Blasco-Gimenez, R.    Control strategy of a dual-inverter system for an open-end winding induction machine based on indirect matrix converter EPE-ECCE Europe 2014 - 16th European Conference on Power Electronics and Applications
Abodhir, N.A. ,  Watson, A.J.,  Ji, C.,  Clare, J.C.   Resonant converter based modulator control for magnetron with variable load EPE-ECCE Europe 2014 - 16th European Conference on Power Electronics and Applications
Solomon, A.K. ,  Castellazzi, A. Alternative integration scheme for half-bridge switch using double etched Si3N4 substrate ESTC 2014 - 5th Electronics System-Integration Technology Conference
T. Yang, S. Bozhko, G. Asher Development of Dynamic Phasors for the Modelling of Aircraft Electrical Power Systems Greener Aviation Conference 2014
Jianfeng Li, Pearl Agyakwa, Paul Evans, Christopher Mark Johnson, Yimin Zhao, Yibo Wu, Kim Evans Packaging/Assembling Technologies for a High Performance SiC-Based Planar Power Module Greener Aviation Conference 2014
Galea, M. ,  Xu, Z. ,  Tighe, C. ,  Hamiti, T. ,  Gerada, C. ,  Pickering, S.  Development of an aircraft wheel actuator for green taxiing ICEM 2014 - 21st International Conference on Electrical Machines
Aigbomian, A.,  Arumugam, P.,  Hamiti, T.,  Gerada, C. Fast computing tool for performance evaluation in Interior Permanent Magnet machines ICEM 2014 - 21st International Conference on Electrical Machines
Bartolo, J.B. ,  Gerada, C.  The electromagnetic design of a high speed, 45kW, switched reluctance machine having a novel rotor geometry for aerospace application ICEM 2014 - 21st International Conference on Electrical Machines
Xu, Z. ,  Tighe, C. ,  Galea, M. ,  Hamiti, T. ,  Gerada, C. ,  Pickering, S.J.  Thermal design of a permanent magnetic motor for direct drive wheel actuator ICEM 2014 - 21st International Conference on Electrical Machines
Galea, M. ,  Roggia, S.,  Papini, L.,  Xu, Z.,  Tighe, C.,  Hamiti, M.,  Gerada, C.,  Pickering, S. Design aspects of a high torque density machine for an aerospace traction application ICEMS 2014 - 17th International Conference on Electrical Machines and Systems
Papini, L.,  Gerada, C.,  Gerada, D.,  Mebarki, A. High speed solid rotor induction machine: Analysis and performances ICEMS 2014 - 17th International Conference on Electrical Machines and Systems
Xu, Z. ,  Galea, M.,  Tighe, C.,  Hamiti, T.,  Gerada, C.,  Pickering, S.J. Mechanical and thermal management design of a motor for an aircraft wheel actuator ICEMS 2014 - 17th International Conference on Electrical Machines and Systems
Evans, P.,  Castellazzi, A.,  Johnson, C.M.,  Lu, H.,  Bailey, C. The optimization of thermal performance in power electronics modules ICEPT 2014 - 15th International Conference on Electronic Packaging Technology
Rawa, M.J.H. , Thomas, D.W.P. , Sumner, M.  Factors affecting the harmonics generated by a cluster of personal computers ICHQP 2014 - 16th International Conference on Harmonics and Quality of Power
Bozhko, S., Yeoh, S.S., Gao, F., Hill, C. Aircraft starter-generator system based on permanent-magnet machine fed by active front-end rectifier IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society 
F. Gao, S. Bozhko, and G. Asher An improved voltage compensation method for droop-controlled system in dc microgrid IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society 
Buticchi, G., Galea, M., Empringham, L., De Lillo, L., Gerada, C., Bianchini, C. Enabling technologies for a fault tolerant linear actuation drive IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society 
Wang, X., Castellazzi, A., Zanchetta, P. Full-order observer based IGBT temperature online estimation IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society 
Calzo, G.L., Zanchetta, P., Gerada, C., Lidozzi, A., Degano, M., Crescimbini, F., Solero, L. Performance evaluation of converter topologies for high speed Starter/Generator in aircraft applications IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society 
Rivera, M., Rodriguez, J., Espinoza, J., Olloqui, A., Wheeler, P., Zanchetta, P., Baier, C., Munoz, J.  Two predictive control techniques for output voltage control and improvement of the source currents in an indirect matrix converter IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014
Rawa, M.J.H. , Thomas, D.W.P. , Sumner, M.    Background voltage distortion and percentage of nonlinear load impacts on the harmonics produced by a group of personal computers  IEEE International Symposium on Electromagnetic Compatibility
Ivry, P.M. , Oke, O.A. , Thomas, D.W.P. , Sumner, M.    Method of efficiently predicting the conducted emissions of multiple VSCs IEEE International Symposium on Electromagnetic Compatibility
Arumugam, P., Dusek, J., Aigbomian, A., Vakil, G., Bozhko, S., Hamiti, T., Gerada, C., Fernando, W. Comparative design analysis of Permanent Magnet rotor topologies for an aircraft starter-generator IEPS 2014 -IEEE International Conference on Intelligent Energy and Power Systems
Gao, F., Bozhko, S., Yeoh, S., Asher, G., Wheeler, P. Stability of multi-source droop-controlled Electrical Power System for more-electric aircraft IEPS 2014 -IEEE International Conference on Intelligent Energy and Power Systems
De, D., Castellazzi, A., Lamantia, A. 1.2kW dual-active bridge converter using SiC power MOSFETs and planar magnetics IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Giangrande, P. , Hill, C.I., Bozhko, S.V., Gerada, C. A novel multi-level electro-mechanical actuator virtual testing and analysis tool IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Romlie, M.F., Rashed, M., Klumpner, C., Asher, G.M. An analysis of efficiency improvement with the installation of energy storage in power systems IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Li, J., Gurpinar, E., Lopez-Arevalo, S., Castellazzi, A., Mills, L. Built-in reliability design of a high-frequency SiC MOSFET power module IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
J.F Li, E. Gurpinar, S. Lopez-Arevalo, D. De, A. Castellazzi, L. Mills Design of a lightweight SiC-based half-bridge power module for avionic applications IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
La Rocca, A., Pickering, S.J., Eastwick, C., Gerada, C. Enhanced cooling for an electric starter-generator for aerospace application IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Kulsangcharoen, P. , Rashed, M., Klumpner, C., De, D., Patel, C., Asher, G. Experimental evaluation and efficiency optimisation of a grid-connected converter for household energy storage applications IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Lopez-Arevalo, S., Degano, M.a Gerada, C., Paciura, K., Ernest, E., Palmer, B.K., Hunt, M. Implementation of a battery back-up system for generator set downsizing IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Solomon, A.K., Skuriat, R., Castellazzi, A. , Wheeler, P. Modular integration of a matrix converter IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Barater, D. , Buticchi, G., Concari, C., Franceschini, G., Gurpinar, E., De, D., Castellazzi, A. Performance analysis of UniTL-H6 inverter with SiC MOSFETs IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Papini, L., Gerada, C. Thermal-electromagnetic analysis of solid rotor induction machine IPEC-Hiroshima - ECCE Asia 2014 - 7th International Power Electronics Conference
Castellazzi, A., Fayyaz, A., Yang, L., Riccio, M., Irace, A. Short-circuit robustness of SiC Power MOSFETs: Experimental analysis ISPSD 2014 - 26th International Symposium on Power Semiconductor Devices and Ics
D'Alessandro, V., Magnani, A., Riccio, M.a Breglio, G., Irace, A., Rinaldi, N., Castellazzi, A. SPICE modeling and dynamic electrothermal simulation of SiC power MOSFETs ISPSD 2014 - 26th International Symposium on Power Semiconductor Devices and Ics
C.I. Hill, P. Giangrande, C. Gerada, S.V. Bozhko Implementation of a Multi-Level Power Electronic Inverter Library in Modelica Modelica
Franciscus van der Linden, Clemens Schlegel, Markus Christmann, Gergely Regula, Christopher Hill, Paolo Giangrande, Jean-Charles Maré and Imanol Egaña Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters Modelica 2014
Tenti, P., Caldognetto, T., Buso, S., Costabeber, A. Control of utility interfaces in low voltage microgrids PEDG 2014 - 5th International Symposium on Power Electronics for Distributed Generation Systems
Papadopoulos, S. , Rashed, M., Klumpner, C., Wheeler, P. A hybrid inverter solution for medium voltage applications using series capacitor and a CSI active power filter (SC-APF) PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Shen, L., Asher, G., Bozhko, S., Chintanbhai, P., Wheeler, P. Active DC bus capacitor harmonic current minimization method for back-to-back converters PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Farr, E.M., Feldman, R., Watson, A.J., Burgos, R.P., Clare, J.C., Wheeler, P.W., Boroyevich, D. Alternate arm converter (AAC) operation under faulted AC-grid conditions PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
M F Romlie, M Rashed, C Klumpner, G M Asher An Analysis of Efficiency Improvement with the Installation of Energy Storage in Power Systems PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Degano, M., Arumugam, P., Fernando, W., Yang, T., Zhang, H., Bartolo, J.B., Bozhko, S., Wheeler, P., Gerada, C. An optimized Bi-directional, wide speed range electric starter-generator for aerospace application PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Mebarki, A., Gerada, D., Brown, N.L. Analysis of an axial PM flux machine with field weakening capability for engine integration PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Yang, L. , Fayyaz, A., Castellazzi, A. Characterization of high-voltage SiC MOSFETs under UIS avalanche stress PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Abodhir, N.A. , Watson, A.J., Clare, J.C. Control of high voltage series resonant power supply for industrial magnetrons PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Rottach, M. , Gerada, C., Wheeler, P.W. Design optimisation of a fault-tolerant PM motor drive for an aerospace actuation application PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Davies, R. ,  Sumner, M.,  Christopher, E. Energy storage control for a small community microgrid  PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
P. Kulsangcharoen, M. Rashed, C. Klumpner, D. De, C. Patel, G. Asher Experimental Evaluation and Efficiency Optimisation of a Grid- Connected Converter for Household Energy Storage Applications PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Arif, B. , Tarisciotti, L., Zanchetta, P., Clare, J. Finite set model predictive control with a novel online grid inductance estimation technique PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Zacharis, E.a, Cross, A.M., Godfrey, B. , Safari, S., Castellazzi, A., Ward, P., Mosely, I.  High efficiency SiC AC chopper for LV networks PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Safari, S. , Castellazzi, A., Wheeler, P. Influence of commutation delay on waveform distortion in high frequency sic matrix converter PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
De, D., Castellazzi, A., Lopez-Arevalo, S., Lamantia, A. SiC MOSFET based avionic power supply PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
Gurpinar, E., Lopez-Arevalo, S., Li, J., De, D., Castellazzi, A., Mills, L. Testing of a lightweight SiC power module for avionic applications PEMD 2014 -7th IET International Conference on Power Electronics, Machines and Drives
CHAO J., WATSON A. J., ABODHIR N. and CLARE J. High Efficiency Operating Popint Tracking Techniques For Resonant Power Converters In High Power RF Applications PPS 2014 - UK Pulsed Power Symposium
WATSON A. J., CHAO J., CLARE J., WHEELER P., REYES-MORAGA E. and ABODHIR N Resonant Power Electronics For Pulsed Power And High Voltage Applications PPS 2014 - UK Pulsed Power Symposium
F. Gao, S. Bozhko, and G. Asher Drooping strategies for paralleling sources and their effect on electric power system stability Proc. SAE 2014 Aerospace Systems and Technology Conference
Watson, A.J., Ji, C., Clare, J.C. A phase locked loop system for soft switching tracking of resonant power converters in high voltage, high power RF applications Proceedings of the 2014 IEEE International Power Modulator and High Voltage Conference
Jankovic, M., Watson, A., Clare, J., Wheeler, P., Aguglia, D. Optimal power system and grid interface design considerations for the CLICs klystron modulators Proceedings of the 2014 IEEE International Power Modulator and High Voltage Conference
Zigliotto, M.,  Carraro, M.,  Antonello, R.,  Costabeber, A. A fast-MPPT low-complexity autonomous PV water pumping scheme for PMSM   RPG 2014 - 3rd Renewable Power Generation Conference
Rose, C. , Sumner, M., Thomas, D.W.P., Christopher, E. Impedance sensitive STATCOM control for systems supported by renewable generation RPG 2014 - 3rd Renewable Power Generation Conference
Fazeli, A., Sumner, M. , Christopher, E., Johnson, M. Power flow control for power and voltage management in future smart energy communities RPG 2014 - 3rd Renewable Power Generation Conference
S.V.Bozhko, T.Yang, F, Gao Control Design for Electric Starter-Generator Based on a High-Speed Permanent-Magnet Machine Fed by an Active Front-End Rectifier SAE 2014 Aerospace Systems and Technology Conference
Johnson, M.; Bailey, C. An Integrated Approach to Thermal Management of
Power Electronic Modules		 Therminic 2014

 

 

Power Electronics and Machines Centre

The University of Nottingham
Address line two
Nottingham, postcode


telephone: +44 (0) 115 XXX XXXX
email: research-group-email@nottingham.ac.uk