DILLINGER, B., BATCHELOR, A., KATRIB, J., DODDS, C., SUCHICITAL, C., KINGMAN, S. and CLARK, D., 2020. Microwave digestion of gibbsite and bauxite in sodium hydroxide: Hydrometallurgy Hydrometallurgy. 192, LAYBOURN, A., LÓPEZ-FERNÁNDEZ, A. M., THOMAS-HILLMAN, I., KATRIB, J., LEWIS, W., DODDS, C., HARVEY, A. P. and KINGMAN, S. W., 2019. Combining continuous flow oscillatory baffled reactors and microwave heating: Process intensification and accelerated synthesis of metal-organic frameworks: Chemical Engineering Journal Chemical Engineering Journal. 356, 170-177 RENSHAW, R. C., DIMITRAKIS, G. A., ROBINSON, J. P. and KINGMAN, S. W., 2019. The relationship of dielectric response and water activity in food: Journal of Food Engineering Journal of Food Engineering. 244, 80-90 BUTTRESS, A. J., RODRIGUEZ, J. M., URE, A., FERRARI, R. S., DODDS, C. and KINGMAN, S. W., 2019. Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment: Minerals Engineering Minerals Engineering. 131, 407-419 ROBINSON, D., IRVINE, D. J., ROBINSON, J. P., LESTER, E. H., KINGMAN, S. W. and DIMITRAKIS, G., 2019. Predicting the behaviour of near-critical and supercritical alcohols at microwave frequencies: Validation of molecular dynamic simulations as a tool that can substitute for measurements under extreme experimental conditions: Journal of Supercritical Fluids Journal of Supercritical Fluids. 146, 165-171 DUNDAS, A. A., HOOK, A. L., ALEXANDER, M. R., KINGMAN, S. W., DIMITRAKIS, G. and IRVINE, D. J., 2019. Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators: Reaction Chemistry and Engineering Reaction Chemistry and Engineering. 4(8), 1472-1476 DUNDAS, A. A., HOOK, A. L., ALEXANDER, M. R., KINGMAN, S. W., DIMITRAKIS, G. and IRVINE, D. J., 2019. Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators: Reaction Chemistry and Engineering Reaction Chemistry and Engineering. 4(8), 1472-1476 WILLIAMS, O., URE, A., STEVENS, L., BINNER, E., DODDS, C., KINGMAN, S., DAS, B., DASH, P. S. and LESTER, E., 2019. Formation of metallurgical coke within minutes through coal densification and microwave energy: Energy and Fuels Energy and Fuels. 33(7), 6817-6828 THOMAS-HILLMAN, I., STEVENS, L. A., LANGE, M., MÖLLMER, J., LEWIS, W., DODDS, C., KINGMAN, S. W. and LAYBOURN, A., 2019. Developing a sustainable route to environmentally relevant metal-organic frameworks: Ultra-rapid synthesis of MFM-300(Al) using microwave heating: Green Chemistry Green Chemistry. 21(18), 5039-5045 DILLINGER, B., SUCHICITAL, C., CLARK, D., BATCHELOR, A., DODDS, C. and KINGMAN, S., 2019. The effects of microwave radiation on the digestion of gibbsite by sodium hydroxide AL-HARAHSHEH, M., ALJARRAH, M., AL-OTOOM, A., ALTARAWNEH, M. and KINGMAN, S., 2018. Pyrolysis kinetics of tetrabromobisphenol a (TBBPA) and electric arc furnace dust mixtures: Thermochimica Acta Thermochimica Acta. 660, 61-69 WILLIAMS, O., TAYLOR, S., LESTER, E., KINGMAN, S., GIDDINGS, D. and EASTWICK, C., 2018. Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications: Materials Materials. 11(8), WILLIAMS, O., TAYLOR, S., LESTER, E., KINGMAN, S., GIDDINGS, D. and EASTWICK, C., 2018. Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications: Materials Materials. 11(8), DURÁN-JIMÉNEZ, G., HERNÁNDEZ-MONTOYA, V., MONTES-MORÁN, M. A., KINGMAN, S. W., MONTI, T. and BINNER, E. R., 2018. Microwave pyrolysis of pecan nut shell and thermogravimetric, textural and spectroscopic characterization of carbonaceous products: Journal of Analytical and Applied Pyrolysis Journal of Analytical and Applied Pyrolysis. WILLIAMS, O., EASTWICK, C., KINGMAN, S., GIDDINGS, D., LORMOR, S. and LESTER, E., 2017. Overcoming the caking phenomenon in olive mill wastes: Industrial Crops and Products Industrial Crops and Products. 101, 92-102 BUTTRESS, A. J., KATRIB, J., JONES, D. A., BATCHELOR, A. R., CRAIG, D. A., ROYAL, T. A., DODDS, C. and KINGMAN, S. W., 2017. Towards large scale microwave treatment of ores: Part 1 – Basis of design, construction and commissioning: Minerals Engineering Minerals Engineering. 109, 169-183 LAYBOURN, A., KATRIB, J., FERRARI-JOHN, R. S., MORRIS, C. G., YANG, S., UDOUDO, O., EASUN, T. L., DODDS, C., CHAMPNESS, N. R., KINGMAN, S. W. and SCHRÖDER, M., 2017. Metal-organic frameworks in seconds via selective microwave heating: Journal of Materials Chemistry A Journal of Materials Chemistry A. 5(16), 7333-7338 FERRARI-JOHN, R. S., KATRIB, J., ZERVA, E., DAVIES, N., COOK, D. J., DODDS, C. and KINGMAN, S., 2017. Electromagnetic Heating for Industrial Kilning of Malt: a Feasibility Study Food and Bioprocess Technology. 10(4), 687-698 JIMENEZ, G. D., MONTI, T., TITMAN, J. J., HERNANDEZ-MONTOYA, V., KINGMAN, S. W. and BINNER, E. R., 2017. New insights into microwave pyrolysis of biomass: Preparation of carbon-based products from pecan nutshells and their application in wastewater treatment: Journal of Analytical and Applied Pyrolysis Journal of Analytical and Applied Pyrolysis. 124, 113-121 MONTI, T., UDOUDO, O. B., SPERIN, K. A., DODDS, C., KINGMAN, S. W. and JACKSON, T. J., 2017. Statistical Description of Inhomogeneous Samples by Scanning Microwave Microscopy: IEEE Transactions on Microwave Theory and Techniques IEEE Transactions on Microwave Theory and Techniques. BATCHELOR, A. R., BUTTRESS, A. J., JONES, D. A., KATRIB, J., WAY, D., CHENJE, T., STOLL, D., DODDS, C. and KINGMAN, S. W., 2017. Towards large scale microwave treatment of ores: Part 2 – Metallurgical testing: Minerals Engineering Minerals Engineering. 111, 5-24 SANCHEZ-SEGADO, S., MONTI, T., KATRIB, J., KINGMAN, S., DODDS, C. and JHA, A., 2017. Towards sustainable processing of columbite group minerals: Elucidating the relation between dielectric properties and physico-chemical transformations in the mineral phase: Scientific Reports Scientific Reports. 7(1), BUTTRESS, A. J., BINNER, E., YI, C., PALADE, P., ROBINSON, J. P. and KINGMAN, S. W., 2016. Development and evaluation of a continuous microwave processing system for hydrocarbon removal from solids: Chemical Engineering Journal Chemical Engineering Journal. 283, 215-222 ZHAO, H., YANG, G., GAO, X., PANG, C. H., KINGMAN, S. W. and WU, T., 2016. Hg0 Capture over CoMoS/γ-Al2O3 with MoS2 Nanosheets at Low Temperatures: Environmental Science and Technology Environmental Science and Technology. 50(2), 1056-1064 LAYBOURN, A., KATRIB, J., PALADE, P. A., EASUN, T. L., CHAMPNESS, N. R., SCHRÖDER, M. and KINGMAN, S. W., 2016. Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies: Physical Chemistry Chemical Physics Physical Chemistry Chemical Physics. 18(7), 5419-5431 FERRARI-JOHN, R. S., KATRIB, J., PALADE, P., BATCHELOR, A. R., DODDS, C. and KINGMAN, S. W., 2016. A Tool for Predicting Heating Uniformity in Industrial Radio Frequency Processing: Food and Bioprocess Technology Food and Bioprocess Technology. 9(11), 1865-1873 RENSHAW, R. C., ROBINSON, J. P., DIMITRAKIS, G. A., BOWS, J. R. and KINGMAN, S. W., 2016. Characterisation of potato crisp effective porosity using micro-CT: Journal of the Science of Food and Agriculture Journal of the Science of Food and Agriculture. 4440-4448 ZHAO, H., YANG, G., GAO, X., PANG, C., KINGMAN, S., LESTER, E. and WU, T., 2016. Hg°-temperature-programmed surface reaction and its application on the investigation of metal oxides for Hg° capture: Fuel Fuel. 181, 1089-1094 MONTI, T., TSELEV, A., UDOUDO, O., IVANOV, I. N., DODDS, C. and KINGMAN, S. W., 2016. High-resolution dielectric characterization of minerals: A step towards understanding the basic interactions between microwaves and rocks: International Journal of Mineral Processing International Journal of Mineral Processing. 151, 8-21 WILLIAMS, O., NEWBOLT, G., EASTWICK, C., KINGMAN, S., GIDDINGS, D., LORMOR, S. and LESTER, E., 2016. Influence of mill type on densified biomass comminution: Applied Energy Applied Energy. 182, 219-231 BATCHELOR, A. R., FERRARI-JOHN, R. S., KATRIB, J., UDOUDO, O., JONES, D. A., DODDS, C. and KINGMAN, S. W., 2016. Pilot scale microwave sorting of porphyry copper ores: Part 1 – Laboratory investigations: Minerals Engineering Minerals Engineering. 98, 303-327 BATCHELOR, A. R., FERRARI-JOHN, R. S., DODDS, C. and KINGMAN, S. W., 2016. Pilot scale microwave sorting of porphyry copper ores: Part 2 – Pilot plant trials: Minerals Engineering Minerals Engineering. 98, 328-338 FERRARI-JOHN, R. S., BATCHELOR, A. R., KATRIB, J., DODDS, C. and KINGMAN, S. W., 2016. Understanding selectivity in radio frequency and microwave sorting of porphyry copper ores: International Journal of Mineral Processing International Journal of Mineral Processing. 155, 64-73 ROBINSON, J., DODDS, C., STAVRINIDES, A., KINGMAN, S., KATRIB, J., WU, Z., MEDRANO, J. and OVEREND, R., 2015. Microwave pyrolysis of biomass: Control of process parameters for high pyrolysis oil yields and enhanced oil quality: Energy and Fuels Energy and Fuels. 29(3), 1701-1709 BUTTRESS, A.J, JONES, D.A, DODDS, C., DIMITRAKIS, G, CAMBELL, C.J, DAWSON, A. and KINGMAN, S.W., 2015. Understanding the scabbling of concrete using microwave energy Cement and Concrete Research. 75, 75-90 BATCHELOR, A. R., JONES, D. A., PLINT, S. and KINGMAN, S. W., 2015. Deriving the ideal ore texture for microwave treatment of metalliferous ores: Minerals Engineering Minerals Engineering. 84, 116-129 KATRIB, J., FOLORUNSO, O., DODDS, C., DIMITRAKIS, G. and KINGMAN, S. W., 2015. Improving the design of industrial microwave processing systems through prediction of the dielectric properties of complex multi-layered materials: Journal of Materials Science Journal of Materials Science. 50(23), 7591-7599 JOHN, R. S., BATCHELOR, A. R., IVANOV, D., UDOUDO, O. B., JONES, D. A., DODDS, C. and KINGMAN, S. W., 2015. Understanding microwave induced sorting of porphyry copper ores: Minerals Engineering Minerals Engineering. 84, 77-87 BINNER, E. R., ROBINSON, J. P., SILVESTER, S. A., KINGMAN, S. W. and LESTER, E. H., 2014. Investigation into the mechanisms by which microwave heating enhances separation of water-in-oil emulsions FUEL. 116, 516-521 KITCHEN, HELEN J., VALLANCE, SIMON K., KENNEDY, JENNIFER L., TAPIA-RUIZ, NURIA, CARASSITI, LUCIA, HARRISON, ANDREW, WHITTAKER, A. GAVIN, DRYSDALE, TIMOTHY D., KINGMAN, SAMUEL W. and GREGORY, DUNCAN H., 2014. Modern Microwave Methods in Solid-State Inorganic Materials Chemistry: From Fundamentals to Manufacturing CHEMICAL REVIEWS. 114(2), 1170-1206 NGUYEN, NAM T., GREENHALGH, EDWARD, KAMARUDDIN, MOHD J., EL HARFI, JAOUAD, CARMICHAEL, KIM, DIMITRAKIS, GEORGIOS, KINGMAN, SAMUEL W., ROBINSON, JOHN P. and IRVINE, DEREK J., 2014. Understanding the acceleration in the ring-opening of lactones delivered by microwave heating TETRAHEDRON. 70(4), 996-1003 KAMARUDDIN, MOHD J., NGUYEN, NAM T., DIMITRAKIS, GEORGIOS A., EL HARFI, JAOUAD, BINNER, ELEANOR R., KINGMAN, SAM W., LESTER, EDWARD, ROBINSON, JOHN P. and IRVINE, DEREK J., 2014. Continuous and direct 'in situ' reaction monitoring of chemical reactions via dielectric property measurement: controlled polymerisation RSC ADVANCES. 4(11), 5709-5717 BINNER, E., MEDIERO-MUNOYERRO, M., HUDDLE, T., KINGMAN, S., DODDS, C., DIMITRAKIS, G., ROBINSON, J. and LESTER, E., 2014. Factors affecting the microwave coking of coals and the implications on microwave cavity design: Fuel Processing Technology Fuel Processing Technology. 125, 8-17 ADLINGTON, K., MCSWEENEY, R., DIMITRAKIS, G., KINGMAN, S. W., ROBINSON, J. P. and IRVINE, D. J., 2014. Enhanced 'in situ' catalysis via microwave selective heating: Catalytic chain transfer polymerisation: RSC Advances RSC Advances. 4(31), 16172-16180 ROBINSON, J., BINNER, E., SAEID, A., AL-HARAHSHEH, M. and KINGMAN, S., 2014. Microwave processing of Oil Sands and contribution of clay minerals: Fuel Fuel. 135, 153-161 BINNER, E.R., ROBINSON, J.P., KINGMAN, S.W., LESTER, E.H., AZZOPARDI, B.J., DIMITRAKIS, G. and BRIGGS, J., 2013. Separation of oil/water emulsions in continuous flow using microwave heating Energy and Fuels. 27(6), 3173-3178 ADLINGTON, K., JONES, G.J., EL HARFI, J., DIMITRAKIS, G., SMITH, A., KINGMAN, S.W., ROBINSON, J.P. and IRVINE, D.J., 2013. Mechanistic investigation into the accelerated synthesis of methacrylate oligomers via the application of catalytic chain transfer polymerization and selective microwave heating Macromolecules. 46(10), 3922-3930 ZHAO, H., WU, T., HE, J., KINGMAN, S., SHI, K., SHEN, D. and ZHANG, Y., 2013. Simultaneous removal of SOx and NOx in flue gas at power stations over a Cu/Na-13X zeolite catalyst Advanced Materials Research. 650, 125-129 AL-OTOOM, A., AL-HARAHSHEH, M., ALLAWZI, M., KINGMAN, S., ROBINSON, J., AL-HARAHSHEH, A. and SAEID, A., 2013. Physical and thermal properties of Jordanian tar sand Fuel Processing Technology. 106, 174-180 CHANG, H., DIMITRAKIS, G., XU, F., YI, C., KINGMAN, S. and ZHU, Y., 2013. Microwave dielectric properties of inorganic fullerene-like tungsten disulfide nanoparticles Chemical Physics Letters. 555, 159-163 A. AL-OTOOM, M. AL-HARAHSHEH, M. ALLAWZI, S. KINGMAN, J. ROBINSON and A. AL-HARAHSHEH, 2012. Physical and thermal properties of Jordanian tar sand Fuel Processing Technology. EL HARFI, J., KINGMAN, S.W., DIMITRAKIS, G., ROBINSON, J.P. and IRVINE, D.J., 2012. Dielectric properties of free radical initiators-investigation of thermal decomposition products Industrial and Engineering Chemistry Research. 51(49), 15811-15820 FOLORUNSO, O., DODDS, C., DIMITRAKIS, G. and KINGMAN, S., 2012. Continuous energy efficient exfoliation of vermiculite through microwave heating International Journal of Mineral Processing. 114-117, 69-79 ROBINSON, J.P., KINGMAN, S.W., LESTER, E.H. and YI, C., 2012. Microwave remediation of hydrocarbon-contaminated soils - Scale-up using batch reactors Separation and Purification Technology. 96, 12-19 VALLANCE, S.R., KITCHEN, H.J., RITTER, C., KINGMAN, S., DIMITRAKIS, G. and GREGORY, D.H., 2012. Probing the microwave interaction mechanisms and reaction pathways in the energy-efficient, ultra-rapid synthesis of tungsten carbide Green Chemistry. 14(8), 2184-2192 CARASSITI, L., JONES, A., HARRISON, P., DOBSON, P.S., KINGMAN, S., MACLAREN, I. and GREGORY, D.H., 2011. Ultra-rapid, sustainable and selective synthesis of silicon carbide powders and nanomaterials via microwave heating Energy & Environmental Science. 4(4), 1503-1510 PEREIRA, I.S.M., ROBINSON, J.P. and KINGMAN, S.W., 2011. Effect of agglomerate size on oil removal during microwave treatment of oil contaminated drill cuttings Industrial & Engineering Chemistry Research. 50(16), 9727-9734 KAMARUDDIN, M.J., EL HARFI, J., DIMITRAKIS, G., NGUYEN, N.T., KINGMAN, S.W., LESTER, E., ROBINSON, J.P., IRVINE, D.J., 2011. Continuous direct on-line reaction monitoring of a controlled polymerisation via dielectric measurement Green Chemistry. 13(5), 1147-1151 ROBINSON, J.P., KINGMAN, S.W., SNAPE, C.E., BRADSHAW, S.M., BRADLEY, M.S.A., SHANG, H. and BARRANCO, R., 2010. Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings Chemical Engineering Research and Design. 88(2), 146-154 ROBINSON, J.P., KINGMAN, S.W., BARRANCO, R., SNAPE, C.E. and AL-SAYEGH, H., 2010. Microwave pyrolysis of wood pellets Industrial & Engineering Chemistry Research. 49(2), 459-463 ROBINSON, J., KINGMAN, S., IRVINE, D., LICENCE, P., SMITH, A., DIMITRAKIS, G., OBERMAYER, D. and KAPPE, C.O., 2010. Electromagnetic simulations of microwave heating experiments using reaction vessels made out of silicon carbide Physical Chemistry Chemical Physics. 12(36), 10793-10800 2010. Microwave treatment of oil contaminated drill cuttings - Towards a commercial scale system Society of Petroleum Engineers - SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production. 4, 2280-2285 ROBINSON, J., KINGMAN, S., IRVINE, D., LICENCE, P., SMITH, A., DIMITRAKIS, G., OBERMAYER, D. and KAPPE, C.O., 2010. Understanding microwave heating effects in single mode type cavities: theory and experiment Physical Chemistry Chemical Physics. 12(18), 4750-4758 SMITH, A.D., LESTER, E.H., THURECHT, K.J., KINGMAN, S.W., HARFI, J.E., DIMITRAKIS, G., ROBINSON, J.P., IRVINE, D.J., 2010. Temperature dependence of the dielectric properties of 2,2'-azobis(2- methyl-butyronitrile) (AMBN) Industrial and Engineering Chemistry Research. 49(6), 3011-3014 SMITH, A.D., LESTER, E., THURECHT, K.J., HARFI, J.E., DIMITRAKIS, G., KINGMAN, S.W., ROBINSON, J.P., IRVINE, D.J., 2010. Dielectric properties of free-radical polymerizations: Molecularly symmetrical initiators during thermal decomposition Industrial and Engineering Chemistry Research. 49(4), 1703-1710 FOKEER, S., LOWNDES, I. and KINGMAN, S., 2009. An experimental investigation of pneumatic swirl flow induced by a three lobed helical pipe International Journal of Heat and Fluid Flow. 30(2), 369-379 ROBINSON, J.P., KINGMAN, S.W., SNAPE, C.E., BARRANCO, R., SHANG, H., BRADLEY, M.S.A. and BRADSHAW, S.M., 2009. Remediation of oil-contaminated drill cuttings using continuous microwave heating Chemical Engineering Journal. 152(2-3), 458-463 ROBINSON, J.P., KINGMAN, S.W., SNAPE, C.E., SHANG, H., BARRANCO, R. and SAEID, A., 2009. Separation of polyaromatic hydrocarbons from contaminated soils using microwave heating Separation and Purification Technology. 69(3), 249-254 VALLANCE, S.R., ROUND, D.M., RITTER, C., CUSSEN, E.J., KINGMAN, S. and GREGORY, D.H., 2009. Ultrarapid microwave synthesis of superconducting refractory carbides Advanced Materials. 21(44), 4502-4504 2009. Dielectric properties of Jordanian oil shales Fuel Processing Technology. 90(10), 1259-1264 2009. A new technology of microwave treatment of oil contaminated drilling waste in a single mode cavity Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section). 25(3), 358-362 DIMITRAKIS, G.A., GEORGE, M., POLIAKOFF, M., HARRISON, I., ROBINSON, J., KINGMAN, S., LESTER, E., GREGORY, A.P. and LEES, K., 2009. A system for traceable measurement of the microwave complex permittivity of liquids at high pressures and temperatures Measurement Science and Technology. 20(4), 045901 WANG, X., MILES, N.J. and KINGMAN, S., 2008. Segregation of ultrafine particles in a centrifugal fluidized bed separator ADVANCED POWDER TECHNOLOGY. VOL 19(NUMB 4), 335-348 DIMITRAKIS, G., VILLAR-GARCIA, I.J., LESTER, E., LICENCE, P. and KINGMAN, S., 2008. Dielectric spectroscopy: a technique for the determination of water coordination within ionic liquids Physical Chemistry Chemical Physics. 10(20), 2947-2951 PINERO-HERNANZ, R., DODDS, C., HYDE, J., GARCIA-SERNA, J., POLIAKOFF, M., LESTER, E., COCERO, M. J., KINGMAN, S., PICKERING, S. and WONG, K. H., 2008. Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water COMPOSITES PART A. VOL 39(NUMBER 3), 454-461 ROBINSON, J. P., SNAPE, C. E., KINGMAN, S. W. and SHANG, H., 2008. Thermal desorption and pyrolysis of oil contaminated drill cuttings by microwave heating JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS. VOL 81(NUMBER 1), 27-32 ROBINSON, J. and KINGMAN, S., 2008. Cooking up drill cuttings The Chemical Engineer. 38-39
KINGMAN, S.W., LOWNDES, I.S., PETAVRATZI, E. and WHITTLES, D.N., 2008. An investigation into the mechanism of dust generation in a tumbling mill Journal of Rock Mechanics and Tunnelling Technology. 14(2), 77-102
ROBINSON, J.P., KINGMAN, S.W. and ONOBRAKPEYA, O., 2008. Microwave-assisted stripping of oil contaminated drill cuttings Journal of Environmental Management. 88, 211-218 JACKSON, K., KINGMAN, S.W., WHITTLES, D.N., LOWNDES, I.S. and REDDISH, D.J., 2008. The effect of strain rate on the breakage behaviour of rock Archives of Mining Sciences. 53(1), 3-22
2008. Microwave thermal remediation technique of organic contaminated soil Yadian Yu Shengguang/Piezoelectrics and Acoustooptics. 30(2), 39-41 2008. Microwave treatment of oil-contaminated drill cuttings at pilot scale Society of Petroleum Engineers - 9th International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production 2008 - "In Search of Sustainable Excellence". 2, 899-905 PIÑERO-HERNANZ, R., GARCIA-SERNA, J., DODDS, C., HYDE, J., POLIAKOFF, M., COCERO, M.J., KINGMAN, S., PICKERING, S. and LESTER, E., 2008. Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions Journal of Supercritical Fluids. 46(1), 83-92 SILVESTER, S.A., LOWNDES, I.S., KINGMAN, S.W. and ARROUSSI, A., 2007. Improved dust capture methods for crushing plant Applied Mathematical Modelling. 31(2), 311-331 WHITTLES, D.N., LOWNDES, I.S., KINGMAN, S.W., YATES, C. and JOBLING, S., 2007. The stability of methane capture boreholes around a long wall coal panel International Journal of Coal Geology. 71(2-3), 313-328 JONES, D. A., KINGMAN, S. W., WHITTLES, D. N. and LOWNDES, I. S., 2007. The influence of microwave energy delivery method on strength reduction in ore samples Chemical Engineering and Processing: Process Intensification. 46(4), 291-299 PETAVRATZI, E., KINGMAN, S. W. and LOWNDES, I. S., 2007. Assessment of the dustiness and the dust liberation mechanisms of limestone quarry operations Chemical Engineering and Processing: Process Intensification. 46(12), 1412-1423 SHANG, H., ROBINSON, J. P., KINGMAN, S. W., SNAPE, C. E. and WU, Q., 2007. Theoretical Study of Microwave Enhanced Thermal Decontamination of Oil Contaminated Waste CHEMICAL ENGINEERING AND TECHNOLOGY. VOL 30(NUMBER 1), 121-130 ROBINSON, J.P., KINGMAN, S.W., SNAPE, C.E. and SHANG, H., 2007. Pyrolysis of biodegradable wastes using microwaves PROCEEDINGS- INSTITUTION OF CIVIL ENGINEERS WASTE AND RESOURCE MANAGEMENT. VOL 160(ISSU 3), 97-104 VALLANCE, S.R., KINGMAN, S. and GREGORY, D.H., 2007. Ultrarapid materials processing: synthesis of tungsten carbide on subminute timescales Advanced Materials. 19(1), 138-142 DOCX, J., KINGMAN, S.W., LESTER, E.H., LOWNDES, I.S., SILVESTER, S.A. and WU, T., 2007. An investigation into unpaved road emissions from a UK surface limestone quarry using cylindrical adhesive pad collectors and image analysis International Journal of Mining, Reclamation and Environment. 21(2), 126-143
AL-HARAHSHEH, M. and KINGMAN, S., 2007. The influence of microwaves on the leaching of sphalerite in ferric chloride CHEMICAL ENGINEERING AND PROCESSING. VOL 46(NUMBER 10), 883-888 WANG, X., MILES, N. J. and KINGMAN, S., 2006. Numerical study of centrifugal fluidized bed separation Minerals Engineering. VOL 19(NO 10), 1109-1114 WHITTLES, D.N., LOWNDES, I.S., KINGMAN, S.W., YATES, C. and JOBLING, S., 2006. Influence of geotechnical factors on gas flow experienced in a UK longwall coal mine panel International Journal of Rock Mechanics and Mining Sciences. 43(3), 369-387 APPLETON, T.J., KINGMAN, S.W., LOWNDES, I.S. and SILVESTER, S.A., 2006. The development of a modelling strategy for the simulation of fugitive dust emissions from in-pit quarrying activities: a UK case study International Journal of Mining, Reclamation and Environment. 20(1), 57-82 WHITTLES, D. N., KINGMAN, S., LOWNDES, I. and JACKSON, K., 2006. Laboratory and numerical investigation into the characteristics of rock fragmentation Minerals Engineering. 19(14), 1418-1429 LOWNDES, I. S., YANG, Z. Y., KINGMAN, S. W., SILVESTER, S. A. and TUCK, M. A., 2006. A parametric study of a longwall district climatic prediction and planning model Transactions of the Institution of Mining and Metallurgy: Section A Mining Technology. 115(3), 99-121
HYDE, J. R., LESTER, E., KINGMAN, S., PICKERING, S. and WONG, K. H., 2006. Supercritical propanol, a possible route to composite carbon fibre recovery: A viability study Composites Part A: Applied Science and Manufacturing. VOL 37(NUMBER 11), 2171-2175 LESTER, E., KINGMAN, S., DODDS, C. and PATRICK, J., 2006. The potential for rapid coke making using microwave energy FUEL -GUILDFORD-. VOL 85(NUMBER 14-15), 2057-2063
SHANG, H., SNAPE, C.E., KINGMAN, S.W. and ROBINSON, J.P., 2006. Microwave treatment of oil-contaminated North Sea drill cuttings in a high power multimode cavity Separation and Purification Technology. 49(1), 84-90 WHITTLES, D., LOWNDES, I.S., KINGMAN, S., YATES, C. and JOBLING, S., 2006. Geomechanical factors affecting the installation and stability of a surface goaf well at a deep UK coal mine Archives of Mining Sciences. 51(2), 197-230
AL-HARAHSHEH, M., KINGMAN, S., RUTTEN, F. and BRIGGS, D., 2006. ToF-SIMS and SEM study on the preferential oxidation of chalcopyrite INTERNATIONAL JOURNAL OF MINERAL PROCESSING. VOL 80(NUMBER 2-4), 205-214 AL-HARAHSHEH, M., KINGMAN, S. and BRADSHAW, S., 2006. The reality of non-thermal effects in microwave assisted leaching systems? HYDROMETALLURGY -AMSTERDAM-. VOL 84(NUMBER 1-2), 1-13 KINGMAN, S.W., 2006. Recent developments in microwave processing of minerals International Materials Reviews. 51(1), 1-12 AL-HARAHSHEH, M., KINGMAN, S. and BRADSHAW, S., 2006. Scale up possibilities for microwave leaching of chalcopyrite in ferric sulphate INTERNATIONAL JOURNAL OF MINERAL PROCESSING. VOL 80(NUMBER 2-4), 198-204 AL-HARAHSHEH, M., RUTTEN, F., BRIGGS, D. and KINGMAN, S., 2006. Preferential oxidation of chalcopyrite surface facets characterized by ToF-SIMS and SEM APPLIED SURFACE SCIENCE. VOL 252(NUMBER 19), 7155-7158 LEAPER, M.C., SMITH, A.J., SWIFT, M.R., KING, P.J., WEBSTER, H.E., MILES, N.J. and KINGMAN, S.W., 2005. The behaviour of water-immersed glass-bronze particulate systems under vertical vibration Granular Matter. 7(2-3), 57-67 JONES, D.A., KINGMAN, S.W., WHITTLES, D.N. and LOWNDES, I.S., 2005. Understanding microwave assisted breakage Minerals Engineering. 18(7), 659-669 WHITTLES, D. N., KINGMAN, S., LOWNDES, I. S. and GRIFFITHS, R., 2005. An investigation into the parameters affecting mass flow rate of ore material through a microwave continuous feed system Advanced Powder Technology. VOL 16(NUMB 6), 585-610 PETAVRATZI, E., KINGMAN, S. and LOWNDES, I., 2005. Particulates from mining operations: A review of sources, effects and regulations Minerals Engineering. 18(12), 1183-1199 APPLETON, T.J., COLDER, R.I., KINGMAN, S.W., LOWNDES, I.S. and READ, A.G., 2005. Microwave technology for energy-efficient processing of waste Applied Energy. 81(1), 85-113 AL-HARAHSHEH, M., KINGMAN, S., HANKINS, N., SOMERFIELD, C., BRADSHAW, S. and LOUW, W., 2005. The influence of microwaves on the leaching kinetics of chalcopyrite Minerals Engineering. 18(13-14), 1259-1268 SHANG, H., SNAPE, C.E., KINGMAN, S.W. and ROBINSON, J.P., 2005. Treatment of oil-contaminated drill cuttings by microwave heating in a high-power single-mode cavity Industrial and Engineering Chemistry Research. 44(17), 6837-6844 ROBINSON, J. and KINGMAN, S., 2005. Microwave magic The Chemical Engineer. 26-28
SAHYOUN, C., ROWSON, N. A., KINGMAN, S. W., GROVES, L. and BRADSHAW, S. M., 2005. The influence of microwave pre-treatment on copper flotation South African Institute of Mining and Metallurgy. Journal. VOL 105(NUMB 1), 7-14
SILVESTER, S.A., LOWNDES, I.S. and KINGMAN, S.W., 2004. The ventilation of an underground crushing plant Transactions of the Institution of Mining and Metallurgy. Section A: Mining Industry. 113(4), 201-214 FOKEER, S., KINGMAN, S., LOWNDES, I. and REYNOLDS, A., 2004. Characterisation of the cross sectional particle concentration distribution in horizontal dilute flow conveying - a review Chemical Engineering and Processing. VOL 43(NUMBER 6), 677-691 LESTER, E., KINGMAN, S., WONG, K.H., RUDD, C., PICKERING, S. and HILAL, N., 2004. Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study Materials Research Bulletin. 39(10), 1549-1556 LESTER, E. and KINGMAN, S., 2004. The effect of microwave pre-heating on five different coals Fuel. VOL 83(NUMBER 14-15), 1941-1947 KINGMAN, S.W., JACKSON, K., CUMBANE, A., BRADSHAW, S.M., ROWSON, N.A. and GREENWOOD, R., 2004. Recent developments in microwave-assisted comminution International Journal of Mineral Processing. 74(1-4), 71-83 LEAPER, M.C., SEVILLE, J.P., HILAL, N., KINGMAN, S.W. and BURBIDGE, A.S., 2004. Examining predictive correlations for equilibrium concentration profiles in jetsam-rich systems Advanced Powder Technology. 15(3), 311-320 LEAPER, M. C., HILAL, N. and KINGMAN, S. W., 2004. Investigating binary mixtures fluidized using a porous plate Advanced Powder Technology. VOL 15(PART 4), 435-446 LEAPER, M. C., SEVILLE, J. P., HILAL, N., KINGMAN, S. W. and BURBIDGE, A. S., 2004. Investigating the dynamics of segregation of high jetsam binary batch fluidised bed systems Chemical Engineering and Processing. VOL 43(NUMBER 2), 187-192 HILAL, N., HASTAOGLU, M. A., LEAPER, M. C. and KINGMAN, S. W., 2004. The relationship between particle properties and fluidizing velocity during fluidized bed heat transfer Advanced Powder Technology. VOL 15(NUMB 5), 583-594 BAI, B., HANKINS, N. P., HEY, M. J. and KINGMAN, S. W., 2004. In situ mechanistic study of SDS adsorption on hematite for optimized froth flotation Industrial and Engineering Chemistry Research. VOL 43(NUMB 17), 5326-5338 KINGMAN, S. W., JACKSON, K., BRADSHAW, S. M., ROWSON, N. A. and GREENWOOD, R., 2004. An investigation into the influence of microwave treatment on mineral ore comminution Powder Technology. VOL 146(NUMBER 3), 176-184 AL-HARAHSHEH, M. and KINGMAN, S. W., 2004. Microwave-assisted leaching-a review Hydrometallurgy. VOL 73(NUMBER 3-4), 189-203 WHITTLES, D.N., KINGMAN, S.W. and REDDISH, D.J., 2003. Application of numerical modelling for prediction of the influence of power density on microwave-assisted breakage International Journal of Mineral Processing. 68(1-4), 71-91 KINGMAN, S.W., WHITTLES, D., JACKSON, K. and BRADSHAW, S., 2003. Application of high electric field strength microwave energy for processing ores and minerals In: XXII International Mineral Processing Congress.
SAHYOUN, C., KINGMAN, S.W. and ROWSON, N.A., 2003. The effect of heat treatment on chalcopyrite Physical Separation in Science and Engineering. 12(1), 23-30 JONES, D. A., LELYVELD, T. P., MAVROFIDIS, S. D., KINGMAN, S. W. and MILES, N. J., 2002. Microwave heating applications in environmental engineering - a review Resources, Conservation and Recycling. VOL 34(NUMBER 2), 75-90 LEAPER, M.C., KINGMAN, S.W. and SEVILLE, J.P., 2002. Application of permanent dry high intensity magnetic separation for the processing of spent FCC catalyst Magnetic and Electrical Separation. 11(3), 141-153 GREENWOOD, R., ROWSON, N., KINGMAN, S. and BROWN, G., 2002. A new method for determining the optimum dispersant concentration in aqueous grinding Powder Technology. VOL 123(NUMBER 2-3), 199-207 VORSTER, W., ROWSON, N. A. and KINGMAN, S. W., 2001. The effect of microwave radiation upon the processing of Neves Corvo copper ore International Journal of Mineral Processing. VOL 63(NUMBER 1), 29-44 KINGMAN, S. W., VORSTER, W. and ROWSON, N. A., 2000. The influence of mineralogy on microwave assisted grinding Minerals Engineering. VOL 13(NUMBER 3), 313-327 KINGMAN, S. W., VORSTER, W. and ROWSON, N. A., 2000. The effect of microwave radiation on the processing of Palabora copper ore South African Institute of Mining and Metallurgy. Journal. VOL 100(PART 3), 197-204
CORFIELD, G.M., ROWSON, N.A. and KINGMAN, S.W., 1999. Effect of microwave radiation upon the magnetic processing of a massive Norwegian ilmenite ore Magnetic and Electrical Separation. 9, 131-148
KINGMAN, S. W. and ROWSON, N. A., 1998. Microwave treatment of minerals Minerals Engineering. VOL 11(NUMBER 11), 1081-1088