Advanced Manufacturing Technology Research Group
  • Print
   
   

Publications

Content
MACULOTTI G, FENG X, SU R, GALETTO M and LEACH R K, 2019. Residual flatness and scale calibration for a point autofocus surface topography measuring instrument Meas. Sci. Technol.. 30, 075005

Content
FENG X, SENIN N, SU R, RAMASAMY S and LEACH R K, 2019. Optical measurement of surface topographies with transparent coatings Optics and Lasers in Engineering. 121, 261-270

Content
AZWZKI Y, LEPETRE F, PSOTA P, SU R, HEIKKINEN V, ZHANG X, CAI N, BITOU Y, LEACH R K, LEDL V, ANWAR N, MEHDI-SOUZANI C and HOUIRA H, 2019. Material standards design for minimum zone fitting of freeform optics In: Proc. 19th Int. euspen Conf., Bilboa, Spain, Jun..

Content
THOMAS M, SU R, NIKOLAEV N, COUPLAND J M and LEACH R K, 2019. Modelling of coherence scanning interferometry for complex surfaces based on a boundary element method In: Proc. SPIE.

Content
GOMEZ C, CAMPANELLI C, SU R, LAWES S and LEACH R K, 2019. Characterisation of the surface topography evolution of an ink-jet printed transparent fluoroplastic with coherence scanning interferometry In: Proc. 22nd Met. & Props, Lyon, France, Jul..

Content
SU, R. and LEACH, R. K., 2019. Extending the linear regime of coherence scanning interferometry

Content
LEACH, R, BOINTON, P, FENG, X, LAWES, S, PIANO, S, SENIN, N, SIMS-WATERHOUSE, D, STAVROULAKIS, P, SU, R, SYAM, W and THOMAS, M, 2019. Information-rich manufacturing metrology: IFIP Advances in Information and Communication Technology IFIP Advances in Information and Communication Technology. 530, 145-157

Content
ZORIN, IVAN, KILGUS, JAKOB, SU, RONG, LENDL, BERNHARD, BRANDSTETTER, MARKUS and HEISE, BETTINA, 2019. Multimodal mid-infrared optical coherence tomography and spectroscopy for non-destructive testing and art diagnosis

Content
HEISE, B., ZORIN, I., HANNESCHL√ĄGER, G. and SU, R., 2019. Optical coherence tomography imaging through the scales

Content
ZORIN, IVAN, KILGUS, JAKOB, BRANDSTETTER, MARKUS, SU, RONG and HEISE, BETTINA, 2019. Supercontinuum sources for multimodal MIR-OCT imaging

Content
FENG X, SU R, HAPPONEN T, LIU J and LEACH R K, 2019. All-optical difference engine for in-process defect inspection for roll-to-roll printed electronics In: Proc. SPIE. 11053.

Content
ELMADIH W, SYAM W P, MASKERY I, CHRONOPOULOS D and LEACH R K, 2019. Mechanical vibration bandgaps in surface-based lattices Additive Manufacturing. 25, 421-429

Content
P. PEREZ, WAHYUDIN P. SYAM, J. A. ALBAJEZ, J. SANTOLARIA and R. LEACH, 2019. Lateral error compensation for stitching-free measurement with focus variation microscopy Measurement Science and Technology. (In Press.)

Content
TANAKA, Y., KOYAMA, H., ODAKE, S., MUTSUDA, H., POPOV, A. A., PATEL, R. and MCWILLIAM, S., 2019. Coupled FPEDs using springs for broadband energy harvesting: International Journal of Applied Electromagnetics and Mechanics International Journal of Applied Electromagnetics and Mechanics. 59(2), 557-565

Content
SIEBERER, S., MCWILLIAM, S. and POPOV, A. A., 2019. Nonlinear electrostatic effects in MEMS ring-based rate sensors under shock excitation: International Journal of Mechanical Sciences International Journal of Mechanical Sciences. 157-158, 485-497
Displaying 1 to 15 of 1727
Previous 1 2 3 4 5 Next

Advanced Manufacturing Technology Research Group

The University of Nottingham
Faculty of Engineering
The University of Nottingham
University Park
Nottingham, NG7 2RD



email:AdvManufacturing@nottingham.ac.uk