Gas Turbine and Transmissions Research Centre
  • Print
   
   

Publications

Content
LIN, T.J., LI, R.F. and OU, H., 2005. 3D Transient Seal Analysis of Reactor Pressure Vessel Using Coupled Thermo-Elasto-Plastic Contact Method In: Proc. 13th ACME Annual Conf., Sheffield, UK, March, 2005.. 83-86

Content
BEN D. SHAW and SAM M DAKKA, 2005. Theory of Influence of Fuel Pyrolysis on Soot Shell Standoff Ratios in Reduced-Gravity Droplet Combustion Combustion Science and Technology. 177(10), 1939-1959

Content
EASTWICK, C.N., HEUBNER, K., AZZOPARDI, B.J., SIMMONS, K.A., YOUNG, C. and MORRISON, R., 2005. Film flow around bearing chamber support structures In: Proceedings of ASME Turbo Expo 2005: Power for Land, Sea and Air.

Content
WANG, P., BECKER, A.A., JONES, I.A. and HYDE, T.H., 2004. Boundary element analysis of contact problems using inverse techniques-linear and quadratic elements Journal of Strain Analysis for Engineering Design. 39(4), 371-382

Content
RATCHEV, S., LIU, S., HUANG, W. and BECKER, A.A., 2004. Milling error prediction and compensation in machining of low-rigidity parts International Journal of Machine Tools & Manufacture. 44(15), 1629-1641

Content
HYDE, T.H., SUN, W., BECKER, A.A. and WILLIAMS, J.A., 2004. Life prediction of repaired welds in a pressurised CrMoV pipe with incorporation of initial damage International Journal of Pressure Vessels and Piping. 81(1), 1-12

Content
HYDE, T.H., SUN, W., BECKER, A.A. and WILLIAMS, J.A., 2004. Creep properties and failure assessment of new and fully repaired P91 pipe welds at 923 K Institution of Mechanical Engineers. Proceedings. Part L, Journal of Materials, Design and Applications. 218(3), 211-222

Content
HYDE, T.H., SUN, W., BECKER, A.A. and WILLIAMS, J.A., 2004. Creep properties and failure assessment of new and fully repaired P91 pipe welds at 923 K Institution of Mechanical Engineers. Proceedings. Part L, Journal of Materials, Design and Applications. 218(3), 211-222

Content
RATCHEV, S., HUANG, W., LIU, S. and BECKER, A. A., 2004. Modelling and simulation environment for machining of low-rigidity components Journal of Materials Processing Technology. VOLS 153/154, 67-73

Content
RATCHEV, S., LIU, S., HUANG, W. and BECKER, A. A., 2004. A flexible force model for end milling of low-rigidity parts Journal of Materials Processing Technology. 153-154, 134-138

Content
HYDE, T. H., SUN, W. and BECKER, A. A., 2004. Effect of geometry change on the creep failure life of a thick-walled CrMoV pipe with a circumferential weldment International Journal of Pressure Vessels and Piping. VOL 81(NUMBER 4), 363-371

Content
GU, S., MCCARTNEY, D.G., EASTWICK, C.N. and SIMMONS, K., 2004. Numerical modeling of in-flight characteristics of Inconel 625 particles during high-velocity oxy-fuel thermal spraying Journal of Thermal Spray Technology. 13(2), 200-213

Content
LEE, C.W., JOHNSON, G.R., PALMA, P.C., SIMMONS, K. and PICKERING, S.J., 2004. Factors affecting the behaviour and efficiency of a targetted jet delivering oil to a bearing lubrication system In: 2004 ASME Turbo Expo, Jun 14-17 2004.

Content
LEE, C.W., PALMA, P.C., SIMMONS, K. and PICKERING, S.J., 2004. Comparison of CFD and PIV data for the airflow in an aero-engine bearing chamber In: 2004 ASME Turbo Expo, Jun 14-17 2004.

Content
FARRALL, M., HIBBERD, S., SIMMONS, K. and GIDDINGS, D., 2004. Predictions of air/oil exit flows in a commercial aero-engine bearing chamber In: Seminar Proceedings: Analytic Methods and Tools in Transmission Systems.
Displaying 1111 to 1125 of 1590
Previous 73 74 75 76 77 Next

Gas Turbine and Transmissions Research Centre

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:ez-g2trc@exmail.nottingham.ac.uk