Optics and Photonics Research Group
  • Print
   
   

Publications

Content
D GOMEZ, S P MORGAN, B R HAYES-GILL, R G CORREIA and S KORPOSH, 2018. Polymeric optical fibre sensor coated by SiO2 nanoparticles for humidity sensing in the skin microenvironment Sensors and Actuators B Chemical. 254, 887–895

Content
CORREIA, R., SINHA, R., NORRIS, A., KORPOSH, S., TALBOT, S., HERNANDEZ, F. U., HAYES-GILL, B. R. and MORGAN, S. P., 2017. Optical fibre sensing at the interface between tissue and medical device

Content
HERNANDEZ, F. U., WANG, T., KORPOSH, S., CORREIA, R., HAYES-GILL, B. R., HROMADKA, J., MOHD HAZLAN, N. N., NORRIS, A., EVANS, D., LEE, S. W. and MORGAN, S. P., 2017. Optical fibre sensing during critical care

Content
LIU, C., SUN, S., CORREIA, R., HAYES-GILL, B. R., KORPOSH, S., MCMASTER, S. A. and MORGAN, S. P., 2017. Capillary refill time monitoring using photonic textiles

Content
JUNG, D. S., CROWE, J. A., BIRCHALL, J. P., SOMEKH, M. G. and SEE, C. W., 2017. Anti-confocal assessment of middle ear inflammation: Biomedical Optics Express Biomedical Optics Express. 8(1), 230-242

Content
Q ZHANG, S P MORGAN and M L MATHER, 2017. Nanoscale Ultrasound-Switchable FRET-Based Liposomes for Near-Infrared Fluorescence Imaging in Optically Turbid Media Small. 13(33), 1602895

Content
PATEL, R., LI, W., SMITH, R. J., SHARPLES, S. D. and CLARK, M., 2017. Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy: Scripta Materialia Scripta Materialia. 140, 67-70

Content
COLOMBI, A., AGEEVA, V., SMITH, R. J., CLARE, A., PATEL, R., CLARK, M., COLQUITT, D., ROUX, P., GUENNEAU, S. and CRASTER, R. V., 2017. Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces: Scientific Reports Scientific Reports. 7(1),

Content
HASHMI, A., LIGHT, R. A., KALASHNIKOV, A. N. and MALAKOUTIKHAH, M., 2017. Accurate heat loss evaluation of water-cooled electric motors using a differential ultrasonic calorimeter

Content
HIRSCH M, PATEL R, LI W, GUAN G, LEACH R K, SHARPLES S D and CLARE A T, 2017. Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture Additive Manufacturing. 13, 135-142

Content
MARK, A.F., LI, W., SHARPLES, S. and WITHERS, P.J., 2017. Comparison of grain to grain orientation and stiffness mapping by spatially resolved acoustic spectroscopy and EBSD Journal of Microscopy.

Content
HELAL, M.A., KAUNGA-NYIRENDA, S.N., LANG, L., BULL, S. and LARKINS, E.C., 2017. High-Brightness Laser Diodes with External Feedback. In: PIPREK, J., ed., Handbook of Optoelectronic Device Modeling and Simulation: Volume 2 : Lasers, Modulators, Photodetectors, Solar Cells, and Numerical Methods 2. Taylor & Francis Books.

Content
KAUNGA-NYIRENDA, S.N., DLUBEK, M., LIM, J.J., BULL, S., PHILLIPS, A.J., SUJECKI, S. and LARKINS, E.C., 2017. Wave Mixing Effects in Semiconductor Optical Amplifiers. In: PIPREK, J., ed., Handbook of Optoelectronic Device Modeling and Simulation: Fundamentals, Materials, Nanostructures, LEDs, and Amplifiers - Volume One 1. Taylor & Francis Books.

Content
MOSSAYEBI, M., BELLANCA, G., PARINI, A., WRIGHT, A.J. and LARKINS, E.C., 2017. Engineering of Hybrid Photonic-Plasmonic Devices for Enhanced Light-Matter Interactions. In: AGRAWAL, A., BENSON, T., DE LA RUE, R.M. and WURTZ, G., eds., Recent Trends in Computational Photonics Springer. (In Press.)
Displaying 1 to 15 of 2037
Previous 1 2 3 4 5 Next

Optics and Photonics Research Group

Faculty of Engineering
The University of Nottingham
University Park
Nottingham, NG7 2RD


telephone: +44 (0)115 95 15536
email: optics@nottingham.ac.uk