Mini project : stepper motor control : document transcript
This is Mini Project documentation about stepper motor control. It is part of the 2009/10 BEng in Digital Systems and Computer Engineering (course number 2ELE0065) from the University of Hertfordshire. All the mini projects are designed as level two modules of the undergraduate programmes. It contains a project introduction and tasks for days 1 and 2. The objectives of this project are to design, develop and test software for an embedded system that will smoothly control the rotation of a
Mini project : virtual network project : document transcript
This is Mini Project documentation about virtual networks. It is part of the 2009/10 BSc in Computer and Network Technologies (course number 2ELE0072) from the University of Hertfordshire. All the mini projects are designed as level two modules of the undergraduate programmes. It includes a project introduction and task lists for days 1 and 2. The objectives of the project are to build a virtual local area network environment, including: * Installation and configuration of virtual network
Mini project : digital video editing : document transcript
This is Mini Project documentation about digital video editing. It is part of the 2009/10 BSc ( Hons ) in Multimedia Technology (course number 2ELE0075) from the University of Hertfordshire. All the mini projects are designed as level two modules of the undergraduate programmes. It contains a project introduction and briefings for days 1 and 2 and an exercise. This project entails the creation, editing, and encoding of a video sequence with the intention of distribution over a particular d
The anatomy cookbook : a dissection guide with recipes
The Anatomy Cookbook has been written to accompany an anatomy and physiology course for bioengineers who would otherwise have missed out on the opportunity to study real organ systems at first hand. It is not an alternative to a standard anatomy text, it acts more as a laboratory supplement. The fun bit is that your kitchen takes the place of the dissection room. Each recipe provides an insight into one or more organs, and all you need to do is go to the supermarket and be prepared to think abou
Cardiology Examination - Patient Introduction
Patient Introduction - Introduce yourself and ask for permission to examine the patient. - Ensure the patient is in a warm environment. - Expose patient adequately,preserving dignity. - General inspection for distress. - Observe particularly for malar flush.
Non-renewable resource exploitation: basic models: lecture slides
Lecture slides for an Introduction to Resource Economics course, taught by Aaron Hatcher, of the University of Portsmouth in 2008. Available in PDF format.
TALAT Lecture 2712: Design Example in Fatigue
This is a fully documented calculation example with direct reference to the actual code provisions. Its purpose is to present an outline of necessary steps but also of possible considerations for other cases or possibilities of enhancement of fatigue behaviour in service. It is based on European Standard ENV 1999-2 (Eurocode 9)
TALAT Lecture 4400: Introduction to Friction, Explosive and Ultrasonic Welding Processes of Aluminiu
This lecture gives a brief introduction to friction, explosive and ultrasonic welding techniques of aluminium; it describes the possibilities and results of joining aluminium to different metals, e.g. stainless steel. General mechanical engineering background and basic knowledge in aluminium metallurgy is assumed.
TALAT Lecture 3202: The Liquid Metal
This lecture provides an introduction to factors affecting the quality of molten aluminium. Basic knowledge of foundry practice is assumed. The student should be able to appreciate the differences between good and bad melting practices in a foundry.
TALAT Lecture 2201.01: State of the Art
This lecture gives an introduction into use of aluminium in stressed applications, with examples of the past experiences and likely future developments. A general engineering background is an advantage but the subject matter is suitable for most audiences concerned with transport and structural applications.
TALAT Lecture 3206: The Feeding of Castings
This lecture provides an introduction to the techniques used to compensate for the solidification shrinkage of castings. The students will be able to understand the basic principles of how to design a feeder system to produce a shrinkage-free casting. Basic knowledge of castings production, basic physics and metallurgy background is assumed.
TALAT Lecture 2713: Fire Design Example
Example of fire design of the industrial building. This is a fully documented calculation example with direct reference to the actual code provisions. It is based on European Standard ENV 1999-2 (Eurocode 9)
Introduction to OO Programming in Java - Classes and arithmetic
This reading material forms part of the "Classes and arithmetic" topic in the Introduction to OO Programming in Java module.
Opening access to educational resources for use and reuse
An OOER MEDEV progress report by Suzanne Hardy, Senior Advisor (Information)(March 2010). Presented at UHMLG Spring Forum, Woburn House, London. The Higher Education Funding Council for England (HEFCE) announced an initial £5.7 million of funding for pilot projects that will open up existing high-quality education resources from UK higher education institutions to the world Higher Education Academy and JISC working in partnership to deliver 12-month pilot projects - formally launched in April
Mini project : credit the edit : document transcript
This is Mini Project documentation about creating and editing audio and video content. It is part of the 2009/10 BSc ( Hons ) in Multimedia Technology (course number 2ELE0075) from the University of Hertfordshire. All the mini projects are designed as level two modules of the undergraduate programmes. It includes a project introduction and specification, day 1 and 2 project briefs and a creative brief. The objectives of this module are to demonstrate abilities to: o To plan, generate, s
Economics of Law: module outline
A module outline for a course on the Economics of Law delivered by Professor Antony Dnes at the Central European University. It is typical of a modern law and economics syllabus. The course provides an overview of standard models of the economic analysis of law, based on common-law and civil-law countries: studying property rights, contracts, torts, crime, legal costs regimes, and litigation issues from an economic perspective.
Rapid Application Development - Introduction to 4GLs and Access 2007 development
This practical forms part of the "Introduction to 4GLs and Access 2007 development" topic in the Rapid Application Development module.
Uniform convergence and pointwise convergence
The aim of this material is to introduce the student to two notions of convergence for sequences of real-valued functions. The notion of pointwise convergence is relatively straightforward, but the notion of uniform convergence is more subtle. Uniform convergence is explained in terms of closed function balls and the new notion of sets absorbing sequences. The differences between the two types of convergence are illustrated with several examples. Some standard facts are also discussed: a uniform
Readme file for Introduction to Artificial Intelligence
This readme file contains details of links to all the Introduction to Artificial Intelligence module's material held on Jorum and information about the module as well.
Introduction to modelling for 1st year engineers
These resources cover an introduction to modelling for first year engineering undergraduate. The main focus is on electrical and mechanical systems, but there is also some discussion of dc motors, fluids and heat as well as an introduction to time series modelling. The main emphasis is on why modelling is important and how to go about doing this from first principles (e.g. Kirchhoff's laws, Newton's Laws, etc.). Given the focus is on new students arriving at University, there is no attempt to de