You are here:  

• Print

Publications List

2020

• SMITH, P.H., MURRAY, J.W., JONES, D.O., SEGAL, J., CLARE, A.T., 2020. Magnetic Assisted Directed Energy Deposition. Journal of Materials Processing Technology.
• WADGE, M. D., TURGUT, B., MURRAY, J. W., STUART, B. W., FELFEL, R. M., AHMED, I. and GRANT, D. M., 2020. Developing highly nanoporous titanate structures via wet chemical conversion of DC magnetron sputtered titanium thin films: Journal of Colloid and Interface Science Journal of Colloid and Interface Science. 566, 271-283
• AHMED, N., MURRAY, J. W., YUZAWA, T., NAKAGAWA, T., SARUGAKU, S., SAITO, D., BROWN, P. D. and CLARE, A. T., 2020. Formation of thick electrical discharge coatings: Journal of Materials Processing Technology Journal of Materials Processing Technology. 285,
• G.J. CHAPLAIN, J. M. DE PONTI, A. COLOMBI, R. FUENTES-DOMINGUEZ, P. DRYBURG, D. PIERIS, R.J. SMITH, A.T. CLARE, M. CLARK and R.V. CRASTER, 2020. Tailored elastic surface to body wave Umklapp conversion Nature Communications.
• STEFANO LAURETI, D.A. HUTCHINS, L. ASTOLFI, R.L. WATSON, P.J. THOMAS, P. BURRASCANO, L. NIE, S. FREEAR, M. ASKARI, A.T. CLARE and M. RICCI, 2020. Trapped air metamaterial concept for ultrasonic sub-wavelength imaging in water
• MURRAY, JAMES W., AHMED, NUHAIZE, YUZAWA, TAKASHI, NAKAGAWA, TAKAYUKI, SARUGAKU, SHUN, SAITO, DAIKI and CLARE, ADAM T., 2020. Dry-sliding wear and hardness of thick electrical discharge coatings and laser clads Tribology International. 150
• BOINTON P, TODHUNTER L, CLARE A T and LEACH R K, 2020. Performance verification of a flexible vibration monitoring system Machines. 3, 1-17
• A.SPEIDEL, J. MURRAY, I. BISTEROV, J. MITCHELL-SMITH, C. PARMENTER and A.T CLARE, 2020. Thermal activation of electrochemical seed surfaces for selective and tuneable hydrophobic patterning ACS Applied Materials & Interfaces.
• GORJI, N. E., SAXENA, P., CORFIELD, M., CLARE, A., RUEFF, J. P., BOGAN, J., GONZÁLEZ, P. G. M., SNELGROVE, M., HUGHES, G., O'CONNOR, R., RAGHAVENDRA, R. and BRABAZON, D., 2020. A new method for assessing the utility of powder bed fusion (PBF) feedstock: Materials Characterization Materials Characterization. 161,
• AL-THAMIR, M., MCCARTNEY, D. G., SIMONELLI, M., HAGUE, R. and CLARE, A., 2020. Processability of atypical WC-Co composite feedstock by laser powder-bed fusion: Materials Materials. 13(1),
• SPEIDEL, A., MURRAY, J. W., BISTEROV, I., MITCHELL-SMITH, J., PARMENTER, C. and CLARE, A. T., 2020. Thermal Activation of Electrochemical Seed Surfaces for Selective and Tunable Hydrophobic Patterning: ACS applied materials & interfaces ACS applied materials & interfaces. 12(6), 7744-7759
• M. SIMONELLI, D.G. MCCARTNEY, P. BARRIOBERO-VILA, N.T. ABOULKHAIR, Y.Y. TSE, A.T. CLARE and R. HAGUE, 2020. The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion Metallurgical and Materials Transactions A.
• O. OYELOLA, A. JACKSON-CRISP, P. CRAWFORTH, D.M. PIERIS, R.J.SMITH, R. M’SAOUBI and A.T. CLARE, 2020. Machining of directed energy deposited Ti6Al4V using adaptive control Journal of Manufacturing Processes.
• A.T. CLARE, W.J. REYNOLDS, J.W. MURRAY, N.T. ABOULKHAIR, M. SIMONELLI, M. HARDY, D.M. GRANT and C. TUCK, 2020. Laser calorimetry for assessment of melting behaviour in multi-walled carbon nanotube decorated aluminium by laser powder bed fusion CIRP Annals.
• L BAI, A VELICHKO, A CLARE, P DRYBURGH, B DRINKWATER and D PIERIS, 2020. The effect of distortion models on characterisation of real defects using ultrasonic arrays NDT & E International.
• N. ABOULKHAIR, R. HAGUE, A. CLARE, A. KENNEDY, G. ZHAO and I. ASHCROFT, 2020. Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock Journal of Manufacturing Processes.
• BAI, L., VELICHKO, A., CLARE, A. T., DRYBURGH, P., PIERIS, D. and DRINKWATER, B. W., 2020. The effect of distortion models on characterisation of real defects using ultrasonic arrays: NDT and E International NDT and E International. 113,
• D. HUTCHINS, M. ASKARI, R. WATSON, L. NIE, A. LORENZO, S. FREEAR, S. LAURETI, M. CLARK and A. CLARE, 2020. An ultrasonic metallic Fabry-Pérot metamaterial for use in water Additive Manufacturing.
• ASKARI, M., HUTCHINS, D. A., WATSON, R. L., ASTOLFI, L., NIE, L., FREEAR, S., THOMAS, P. J., LAURETI, S., RICCI, M., CLARK, M. and CLARE, A. T., 2020. An ultrasonic metallic Fabry–Pérot metamaterial for use in water: Additive Manufacturing Additive Manufacturing. 35,

2019

• T.R.WALKER, C.J.BENNETT, T.L.LEE and A.T.CLARE, 2019. A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718 International Journal of Mechanical Sciences.
• J. WALKER, J. MITCHELL-SMITH and A.T. CLARE, 2019. Influence of contact area on the sliding friction and wear behaviour of an electrochemical jet textured Al-Si alloy WEAR.
• A.T. CLARE, J. MITCHELL-SMITH, A. SPEIDEL, I. BISTEROV and J.W MURRAY, 2019. Surface Enhanced Micro Features Using Electrochemical Jet Processing CIRP Annals.
• J.W MURRAY, D GRANT, M SIMONELLI, A.T. CLARE and A SPEIDEL, 2019. Spheroidisation of metal powder by pulsed electron beam irradiation Powder Technology.
• MURRAY, J. W., SIMONELLI, M., SPEIDEL, A., GRANT, D. M. and CLARE, A. T., 2019. Spheroidisation of metal powder by pulsed electron beam irradiation: Powder Technology Powder Technology. 350, 100-106
• PIERIS, D., PATEL, R., DRYBURGH, P., HIRSCH, M., LI, W., SHARPLES, S. D., SMITH, R. J., CLARE, A. T. and CLARK, M., 2019. Spatially resolved acoustic spectroscopy towards online inspection of additive manufacturing: Insight: Non-Destructive Testing and Condition Monitoring Insight: Non-Destructive Testing and Condition Monitoring. 61(3), 132-137
• F ZHANG, T HUA, A.T. CLARE, W. HUANG, J. CHEN, X. LIN and M. GUO, 2019. Microstructure and Properties of Ti-6Al-4V Fabricated by Low-power Pulsed Laser Directed Energy Deposition Journal of Materials Science & Technology.
• P DRYBURGH, D PIERIS, F MARTINA, R PATEL, W LIE, R SMITH, S D. SHARPLES, S WILLIAMS and A.T. CLARE, 2019. Spatially Resolved Acoustic Spectroscopy for Integrity Assessment in Wire-Arc Additive Manufacturing Additive Manufacturing.
• CLARE, A. T., SPEIDEL, A., MITCHELL-SMITH, J., BISTEROV, I. and MURRAY, J. W., 2019. Surface enhanced micro features using electrochemical jet processing: CIRP Annals CIRP Annals.
• MACULOTTI G, SENIN N, OYELOLA O, GALETTO M, CLARE A and LEACH R K, 2019. Multi-sensor data fusion for the characterisation of laser cladded cermet coatings In: Proc. 19th Int. euspen Conf., Bilboa, Spain, Jun..
• K AL-HAMDANY, J.W MURRAY, T. HUSSAIN and A.T. CLARE, 2019. Heat-treatment and mechanical properties of cold-sprayed high strength Al Alloys from satellited feedstocks Surface and Coatings Technology.
• DRYBURGH, P., PIERIS, D., MARTINA, F., PATEL, R., SHARPLES, S., LI, W., CLARE, A. T., WILLIAMS, S. and SMITH, R. J., 2019. Spatially resolved acoustic spectroscopy for integrity assessment in wire–arc additive manufacturing: Additive Manufacturing Additive Manufacturing. 28, 236-251
• H. TAN, T. HU, F. ZHANG, Y. QIU and A.T. CLARE, 2019. Direct Metal Deposition of Satellited Ti‐15Mo: Microstructure and Mechanical Properties
• CLARK, M., CLARE, A., DRYBURGH, P., LI, W., PATEL, R., PIERIS, D., SHARPLES, S. and SMITH, R., 2019. Spatially resolved acoustic spectroscopy (SRAS) microstructural imaging
• DRYBURGH, P., PATEL, R., PIERIS, D. M., HIRSCH, M., LI, W., SHARPLES, S. D., SMITH, R. J., CLARE, A. T. and CLARK, M., 2019. Spatially resolved acoustic spectroscopy for texture imaging in powder bed fusion nickel superalloys
• A GASPER, D HICKMAN, I ASHCROFT, S SHARMA, X WANG, B SZOST, D JOHNS and A.T. CLARE, 2019. Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X Powder Technology.
• A SPEIDEL, J MITCHELL-SMITH, I BISTEROV and A.T. CLARE, 2019. Oscillatory behaviour in the electrochemical jet processing of titanium Journal of Materials Processing Technology.
• AL-HAMDANI, K. S., MURRAY, J. W., HUSSAIN, T. and CLARE, A. T., 2019. Heat-treatment and mechanical properties of cold-sprayed high strength Al alloys from satellited feedstocks: Surface and Coatings Technology Surface and Coatings Technology. 374, 21-31
• TAN, H., GUO, M., CLARE, A. T., LIN, X., CHEN, J. and HUANG, W., 2019. Microstructure and properties of Ti-6Al-4V fabricated by low-power pulsed laser directed energy deposition: Journal of Materials Science and Technology Journal of Materials Science and Technology. 35(9), 2027-2037
• TAN, H., HU, T., ZHANG, F., QIU, Y. and CLARE, A. T., 2019. Direct Metal Deposition of Satellited Ti-15Mo: Microstructure and Mechanical Properties: Advanced Engineering Materials Advanced Engineering Materials.
• SPEIDEL, A., MITCHELL-SMITH, J., BISTEROV, I. and CLARE, A. T., 2019. Oscillatory behaviour in the electrochemical jet processing of titanium: Journal of Materials Processing Technology Journal of Materials Processing Technology. 273,
• GASPER, A. N. D., HICKMAN, D., ASHCROFT, I., SHARMA, S., WANG, X., SZOST, B., JOHNS, D. and CLARE, A. T., 2019. Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X: Powder Technology Powder Technology. 354, 333-337
• WESSEL W.WITS, MARC DE SMIT, KAMAALAL-HAMDANI and ADAM T.CLARE, 2019. Laser powder bed fusion of a Magnesium-SiC metal matrix composite Procedia CIRP. 81, 506-511
• WITS, W. W., DE SMIT, M., AL-HAMDANI, K. and CLARE, A. T., 2019. Laser powder bed fusion of a Magnesium-SiC metal matrix composite
• FARAYIBI, P. K., ABIOYE, T. E., KENNEDY, A. and CLARE, A. T., 2019. Development of metal matrix composites by direct energy deposition of ‘satellited’ powders: Journal of Manufacturing Processes Journal of Manufacturing Processes. 45, 429-437
• CATCHPOLE-SMITH, S., SÉLO, R. R. J., DAVIS, A. W., ASHCROFT, I. A., TUCK, C. J. and CLARE, A., 2019. Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion: Additive Manufacturing Additive Manufacturing. 30,
• K. AL-HAMDANI, J. MURRAY, T. HUSSAIN and A.T CLARE, 2019. Controlling ceramic-reinforcement distribution in laser cladding of MMCs Surface & Coatings Technology.
• DON PIERIS, THEODOSIA STRATOUDAKI, YASHAR JAVADI, PETER LUKACS, SAM CATCHPOLE-SMITH, PAUL D.WILCOX, ADAM T. CLARE and MATT CLARK, 2019. Laser Induced Phased Arrays (LIPA) to detect nested features in Additively Manufactured Components Materials & Design.
• AL-HAMDANI, K. S., MURRAY, J. W., HUSSAIN, T. and CLARE, A. T., 2019. Controlling ceramic-reinforcement distribution in laser cladding of MMCs: Surface and Coatings Technology Surface and Coatings Technology.
• ASTOLFI, L., RICCI, M., WATSON, R. L., HUTCHINS, D. A., THOMAS, P. J., ASKARI, M., CLARE, A. T., NIE, L., FREEAR, S. and LAURETI, S., 2019. Negative refraction in conventional and additively manufactured phononic crystals

2018

• S.J. ALGODI, J. MURRAY, P.D. BROWN and A.T. CLARE, 2018. Wear performance of TiC/Fe cermet electrical discharge coatings Wear. 402-403, 109-123
• J. MITCHELL-SMITH, A. SPEIDEL and A.T. CLARE, 2018. Advancing electrochemical jet methods through manipulation of the angle of address Journal of Materials Processing Technology.
• MITCHELL-SMITH, J., SPEIDEL, A. and CLARE, A. T., 2018. Transitory electrochemical masking for precision jet processing techniques: Journal of Manufacturing Processes Journal of Manufacturing Processes. 31, 273-285
• Z XU, C HYDE, L SEIN, M ANTAR, J DUNLEAVEY, R COOK and A.T CLARE, 2018. The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes International Journal of Fatigue.
• ADAM T. CLARE, ALISTAIR SPEIDEL, IVAN BISTEROV, ALEXANDER JACKSON-CRISP and JONATHON MITCHELL-SMITH, 2018. Precision Enhanced Electrochemical Jet Processing CIRP Annals.
• GE ZHAO, IAN ASHCROFT, RICHARD HAGUE, ANDREW KENNEDY and ADAM, 2018. Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication Materials and Design.
• SAMER J. ALGODI, JAMES W. MURRAY, ADAM T. CLARE and PAUL D. BROWN, 2018. Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings Procedia CIRP.
• ALISTAIR SPEIDEL, JONATHON MITCHELL-SMITH, IVAN BISTEROV and ADAM T. CLARE, 2018. The Dependence of Surface Finish on Material Precondition in Electrochemical Jet Machining Procedia CIRP.
• IVAN BISTEROV, JONATHON MITCHELL-SMITH, ALISTAIR SPEIDEL and ADAM T. CLARE, 2018. Specific and Programmable Surface Structuring by Electrochemical Jet Processing Procedia CIRP.
• JONATHON MITCHELL-SMITH, ALISTAIR SPEIDEL, IVAN BISTEROV and ADAM T. CLARE, 2018. Electrolyte Multiplexing in Electrochemical Jet Processing Procedia CIRP.
• JAMES W MURRAY, RICHARD B COOK, NICOLA SENIN, SAMER J ALGODI and ADAM T CLARE, 2018. Defect-free TiC/Si multi-layer electrical discharge coatings Materials and Design.
• MARCO SIMONELLI, NESMA T ABOULKHAIR, PHILIP COHEN, JAMES MURRAY, ADAM CLARE, CHRISTOPHER TUCK and RICHARD HAGUE, 2018. A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks Materials Characterization.
• ALISTAIR SPEIDEL, RONG SU, JONATHON MITCHELL-SMITH, PAUL DRYBURGH, IVAN BISTEROV, DON M PIERIS, WENQI LI, RIKESH PATEL, MATT CLARK and ADAM THOMAS CLARE, 2018. Crystallographic texture can be rapidly determined by electrochemical surface analytics Acta Materialia.
• ALISTAIR SPEIDEL, JONATHON MITCHELL-SMITH, IVAN BISTEROV and ADAM THOMAS CLARE, 2018. The importance of microstructure in electrochemical jet processing Journal of Materials Processing Technology. 262, 459-470
• MURRAY, J. W., COOK, R. B., SENIN, N., ALGODI, S. J. and CLARE, A. T., 2018. Defect-free TiC/Si multi-layer electrical discharge coatings: Materials and Design Materials and Design. 155, 352-365
• SPEIDEL, A., MITCHELL-SMITH, J., BISTEROV, I. and CLARE, A. T., 2018. The importance of microstructure in electrochemical jet processing: Journal of Materials Processing Technology Journal of Materials Processing Technology. 262, 459-470
• SPEIDEL A, SU R, MITCHELL-SMITH J, DRYBURGH P, BISTEROV I, PIERIS D, LI W, PATEL R, CLARK M and CLARE A T, 2018. Crystallographic texture can be rapidly determined by electrochemical surface analytics: Acta Materialia Acta Materialia. 159, 89-101
• SPEIDEL, A., SU, R., MITCHELL-SMITH, J., DRYBURGH, P., BISTEROV, I., PIERIS, D., LI, W., PATEL, R., CLARK, M. and CLARE, A. T., 2018. Crystallographic texture can be rapidly determined by electrochemical surface analytics: Acta Materialia Acta Materialia. 159, 89-101
• OLUSOLA OYELOLA, P CRAWFORTH, R M’SAOUBI and A.T.CLARE, 2018. Machining of functionally graded Ti6Al4V/ WC produced by Directed Energy Deposition Additive Manufacturing.
• WANG, M., ZHANG, Y., XU, X., CHEN, G., CLARE, A. T. and AHMED, N., 2018. Effects of tool intermittent vibration on helical internal hole processing in electrochemical machining: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
• WANG, M., ZHANG, Y., XU, X., CHEN, G., CLARE, A. T. and AHMED, N., 2018. Effects of tool intermittent vibration on helical internal hole processing in electrochemical machining: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
• OYELOLA, O., CRAWFORTH, P., M'SAOUBI, R. and CLARE, A. T., 2018. Machining of functionally graded Ti6Al4V/ WC produced by directed energy deposition: Additive Manufacturing Additive Manufacturing. 24, 20-29
• A GASPER, I ASHCROFT, D JOHNS, B SZOST, S SHARMA and A T CLARE, 2018. Spatter and oxide formation in laser powder bed fusion of Inconel 718 Additive Manufacturing.
• Z XU, C HYDE, J MURRAY and A T CLARE, 2018. Effect of post processing on the creep performance of laser powder bed fused Inconel Additive Manufacturing.
• JACOB WILLIAMS, PAUL DRYBURGH, PRAHALADA RAO, ADAM CLARE and ASHOK SAMAL, 2018. Defect Detection and Monitoring in Metal Additive Manufactured Parts through Deep Learning of Spatially Resolved Acoustic Spectroscopy Signals Smart and Sustainable Manufacturing Systems.
• BOINTON, P., TODHUNTER, L., STAVROULAKIS, P., CLARE, A. and LEACH, R., 2018. The effects of vibration on fringe projection systems
• PATEL, R., HIRSCH, M., DRYBURGH, P., PIERIS, D., ACHAMFUO-YEBOAH, S., SMITH, R., LIGHT, R., SHARPLES, S., CLARE, A. and CLARK, M., 2018. Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy: Applied Sciences (Switzerland) Applied Sciences (Switzerland). 8(10),
• XU, Z., MURRAY, J. W., HYDE, C. J. and CLARE, A. T., 2018. Effect of post processing on the creep performance of laser powder bed fused Inconel 718: Additive Manufacturing Additive Manufacturing. 24, 486-497
• GASPER, A. N. D., SZOST, B., WANG, X., JOHNS, D., SHARMA, S., CLARE, A. T. and ASHCROFT, I. A., 2018. Spatter and oxide formation in laser powder bed fusion of Inconel 718: Additive Manufacturing Additive Manufacturing. 24, 446-456
• ZHAO, G., ASHCROFT, I. A., HAGUE, R. J. M., KENNEDY, A. R. and CLARE, A. T., 2018. Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication: Materials and Design Materials and Design. 149, 63-72
• PIERIS, D. M., PATEL, R., DRYBURGH, P., HIRSCH, M., LI, W., SHARPLES, S. D., SMITH, R. J., CLARE, A. T. and CLARK, M., 2018. Spatially resolved acoustic spectroscopy additive manufacturing - Towards online inspection

2017

• GASPER, A. N. D., CATCHPOLE-SMITH, S., CLARE, A. T., 2017. In-situ synthesis of titanium aluminides by direct metal deposition Journal of Materials Processing Technology. 239, 230-239
• HIRSCH M, PATEL R, LI W, GUAN G, LEACH R K, SHARPLES S D and CLARE A T, 2017. Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture Additive Manufacturing. 13, 135-142
• J MURRAY, SJ ALGODI, MW FAY, PD BROWN and AT CLARE, 2017. Formation mechanism of electrical discharge TiC-Fe composite coatings Journal of Materials Processing Technology. 243, 143-151
• A SUMNER, C GERADA, N BROWN and A.T. CLARE, 2017. Controlling DC permeability in cast steels Journal of Magnetism and Magnetic Materials.
• S. CATCHPOLE-SMITH, N. ABOULKHAIR, L. PARRY, C. TUCK, I.A. ASHCROFT and A.T. CLARE, 2017. Fractal Scan Strategies for Selective Laser Melting of ‘Unweldable’ Nickel Superalloys Additive Manufacturing.
• K.S. AL-HAMDANI, J.W. MURRAY, A. KENNEDY and A.T. CLARE, 2017. Cold Sprayed Metal-Ceramic Coatings using Satellited Powders Materials Letters.
• T.E. ABIOYE, P. K. FARAYIBI and A.T. CLARE, 2017. A Comparative Study of Inconel 625 Laser Cladding by Wire and Powder Feedstock Materials and Manufacturing Processes.
• A.T CLARE, A SPEIDEL, J. MITCHELL-SMITH and S. PATWARDHAN, 2017. Electrolyte design for suspended particulates in electrolyte jet processing CIRP Annals.
• J MITCHELL-SMITH, A SPEIDEL, J GASKELL and A.T. CLARE, 2017. Energy distribution modulation by mechanical design for electrochemical jet processing techniques International Journal of Machine Tools and Manufacture.
• J.C WALKER, T.J KAMPS, J. MITCHELL-SMITH and A.T. CLARE, 2017. Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material Wear.
• A COLOMBI, V AGEEVA, R SMITH, A CLARE, R PATEL, M CLARK, D COLQUITT, P ROUX, S GUENNEAU and R CRASTER, 2017. Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces Scientific Reports.
• F ZHANG, M YANG, A.T. CLARE, X. LIN, H TAN and Y CHEN, 2017. Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture Journal of Alloys and Compounds.
• XU Z, THOMPSON A, LEACH R K, HYDE C, MASKERY I, TUCK C and CLARE A T, 2017. Staged thermomechanical testing of nickel superalloys produced by selective laser melting Materials and Design. 133, 520-527
• M. HIRSCH, S. CATCHPOLE-SMITH, R. PATEL, P. MARROW, WENQI LI, C. TUCK, S.D. SHARPLES and A.T. CLARE, 2017. Meso-Scale Defect Evaluation of Selective Laser Melting Using Spatially Resolved Acoustic Spectroscopy Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.
• ZHANG, F., YANG, M., CLARE, A. T., LIN, X., TAN, H. and CHEN, Y., 2017. Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture: Journal of Alloys and Compounds Journal of Alloys and Compounds. 727, 821-831
• BOURELL, D., KRUTH, J. P., LEU, M., LEVY, G., ROSEN, D., BEESE, A. M. and CLARE, A., 2017. Materials for additive manufacturing CIRP Annals. 66(2), 659-681
• S.J. ALGODI, A.T CLARE and P.D. BROWN, 2017. Modelling of single spark interactions during electrical discharge coating Journal of Materials Processing Technology. 252, 760-772
• F. ZHANG, M. MEI, K. AL-HAMDANI, H. TAN and A.T CLARE, 2017. Novel Nucleation Mechanisms through Satelliting in Direct Metal Deposition of Ti-15Mo Materials Letters.
• O. OYELOLA, P. CRAWFORTH, R. M'SAOUBI and A.T CLARE, 2017. On the machinability of directed energy deposited Ti6Al4V Additive Manufacturing.
• M. HIRSCH, P. DRYBURGH, S. CATCHPOLE-SMITH, R. PATEL, L. PARRY, S. SHARPLES, I. ASHCROFT and A.T. CLARE, 2017. Targeted Rework Strategies for Powder Bed Additive Manufacture Additive Manufacturing.
• Z. XU, C.J. HYDE, C. TUCK and A.T. CLARE, 2017. Creep Behaviour of Inconel 718 Processed by laser powder bed fusion Journal of Materials Processing Technology.
• J. MITCHELL-SMITH, A. SPEIDEL and A.T. CLARE, 2017. Transitory electrochemical masking for precision jet processing techniques Journal of Manufacturing Processes.
• H. TAN, W. SHANG, K.S. AL-HAMDANI, F. ZHANG, Z. XU and A.T. CLARE, 2017. Direct metal deposition of TiB2/AlSi10Mg composites using satellited powders Materials Letters.
• H TAN, W SHANG, F. ZHANG, A.T CLARE, X. LIN, J. CHEN and W. HUANG, 2017. Process Mechanisms based on Powder Flow Spatial Distribution in Direct Metal Deposition: https://doi.org/10.1016/j.jmatprotec.2017.11.026 Journal of Materials Processing Technology.

2016

• MURRAY, J. W., SUN, J., PATIL, D. V., WOOD, T. A. and CLARE, A. T., 2016. Physical and electrical characteristics of EDM debris Journal of Materials Processing Technology. 229, 54-60
• ABIOYE, T. E., FARAYIBI, P. K., MCCARTNEY, D. G. and CLARE, A. T., 2016. Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating Journal of Materials Processing Technology.
• EVERTON, S., HIRSCH, M., STRAVROULAKIS, P., LEACH, R. K. and CLARE, A. T., 2016. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing Materials and Design. 95, 431–445
• SPEIDEL, A., WALSH, D., MITCHELL-SMITH, J., and CLARE, A. T., 2016. Electrolyte Jet Machining of Titanium Alloys Using Novel Electrolyte Solutions Procedia CIRP.
• MITCHELL-SMITH, J., and CLARE, A. T., 2016. ElectroChemical Jet Machining of Titanium: Overcoming Passivation Layers with Ultrasonic Assistance Procedia CIRP.
• MURRAY, J., 2016. Morphology and Wear Behaviour of Single and Multi-layer Electrical Discharge Coatings Procedia CIRP.
• HIRSCH, M., DEDENBACH, J., LAWES, S. D. S. and CLARE, A. T., 2016. Focussed arc tungsten inert gas brazing of zinc-coated steels MechE Part B: J Engineering Manufacture.
• MASKERY, I., ABOULKHAIR, N. T., CORFIELD, M. R., TUCK, C., CLARE, A. T., LEACH, R. K., WILDMAN, R. D., ASHCROFT, I. A. and HAGUE, R. J. M., 2016. Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography: Materials Characterization Materials Characterization. 111,193-204
• FARAYIBI, P. K., ABIOYE, T. E. and CLARE, A. T., 2016. A parametric study on laser cladding of Ti-6Al-4V wire and WC/W2C powder: International Journal of Advanced Manufacturing Technology International Journal of Advanced Manufacturing Technology. 1-10
• SMITH, R. J., HIRSCH, M., PATEL, R., LI, W., CLARE, A. T. and SHARPLES, S. D., 2016. Spatially resolved acoustic spectroscopy for selective laser melting: Journal of Materials Processing Technology Journal of Materials Processing Technology. 236, 93-102
• GUAN, G., HIRSCH, M., SYAM, W., LEACH, R. K., HUANG, Z, and CLARE, A. T., 2016. Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography Proceedings Royal Society A. 472,20160201

2015

• T.E. ABIOYE, D.G. MCCARTNEY and A.T. CLARE, 2015. Laser cladding of Inconel 625 Wire for Corrosion ProtectionJournal of Materials Processing Technology.
• ABIOYE, T. E., FARAYIBI, P. K., KINNEL, P. and CLARE, A. T., 2015. Functionally graded Ni-Ti microstructures synthesised in process by direct laser metal deposition: International Journal of Advanced Manufacturing Technology International Journal of Advanced Manufacturing Technology.
• ALLWOOD J M, CHILDS T H C, CLARE A T, DESILVA A K M, DHOKAI V, HUTCHINGS I M, LEACH R K, LEAL-AYALA D R, LOWTH S, MAJEWSKI C E, MARZANO A, MEHNEN J, NASSEHI A, OZTURK E, RAFFLES M H, ROY R, SHYHA A and TURNER S, 2015. Manufacturing at double the speed Journal of Materials Processing Technology. 229, 729–757
• HIRSCH, M., DEDENBACH, J., LAWES, S. and CLARE, A. T., 2015. In situ low-cost and adaptable braze tool evaluation system with vision analysis: Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 229(9), 1595-1602
• GUAN, G., HIRSCH, M., LU, Z. H., CHILDS, D. T. D., MATCHER, S. J., GOODRIDGE, R., GROOM, K. M. and CLARE, A. T., 2015. Evaluation of selective laser sintering processes by optical coherence tomography: Materials and Design88, 837-846
• GUAN, G., HIRSCH, M., LU, Z. H., CHILDS, D. T. D., MATCHER, S. J., GOODRIDGE, R., GROOM, K. M. and CLARE, A. T., 2015. Evaluation of selective laser sintering processes by optical coherence tomography: Materials and Design88, 837-846
• MASKERY I, ABOULKHAIR N T, CORFIELD M R, TUCK C, CLARE A T, LEACH R K, WILDMAN R D, ASHCROFT I A and HAGUE R J M, 2015. Quantification and characterisation of porosity in selectively lasermelted Al–Si10–Mg using X-ray computed tomography J. Mater. Process. Technol.. 111, 193-204
• HIRSCH, M., DEDENBACH, J., LAWES, S. and CLARE, A. T., 2015. In situ low-cost and adaptable braze tool evaluation system with vision analysis: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 229(9), 1595-1602

2014

• C.L. LI, J.W. MURRAY, K.T. VOISEY, A.T. CLARE and D.G. MCCARTNEY, 2014. Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy Applied Surface Science. 289, 230–236
• P FARAYIBI, J MURRAY, L HUANG, F BOUD, P KINNELL and A CLARE, 2014. Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling Journal of Materials Processing Technology. 214(3), 710 - 721
• MATTHIAS HIRSCH, SIMON LAWES, JOHANNES DEDENBACH and ADAM T. CLARE, 2014. In situ low-cost and adaptable braze tool evaluation system with vision analysis Proc IMechE Part B: J Engineering Manufacture.
• F. BOUD, J. W. MURRAY, L. F. LOO, A. T. CLARE and P. K. KINNELL, 2014. Soluble Abrasives for Waterjet MachiningMaterials and Manufacturing Processes.
• J.C. WALKER, J.W. MURRAY, M. NIE, R.B. COOK and A.T. CLARE, 2014. The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4 V alloy Applied Surface Science.
• LO PRESTI, D, FECAROTTI, C, CLARE, A.T, AIREY, G, 2014. Toward more realistic viscosity measurements of tyre rubber-bitumen blends Construction and Building Materials.
• KAWANAKA, T, KATO, S, KUNIEDA, M, MURRAY, J.W, CLARE, A.T, 2014. Selective surface texturing using electrolyte jet machining In: Procedia CIRP. 13. 345-349
• C.L. LI, J.W. MURRAY, K.T. VOISEY, A.T. CLARE and D.G. MCCARTNEY, 2014. Corrosion behaviour of a rapidly solidified Al87.4Co7.9Ce4.7 layer prepared by large area electron beam irradiation Applied Surface Science. 320,581-590
• J MURRAY, J WALKER and A T CLARE, 2014. Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation Surface and Coatings Technology.
• LO PRESTI, D., FECAROTTI, C., CLARE, A. T. and AIREY, G., 2014. Toward more realistic viscosity measurements of tyre rubber-bitumen blends: Construction and Building Materials Construction and Building Materials. 67, 270-278
• BOUD, F., MURRAY, J. W., LOO, L. F., CLARE, A. T. and KINNELL, P. K., 2014. Soluble abrasives for waterjet machining: Materials and Manufacturing Processes Materials and Manufacturing Processes. 29(11-12), 1346-1352
• MURRAY, J. W., WALKER, J. C. and CLARE, A. T., 2014. Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation: Surface and Coatings Technology Surface and Coatings Technology.
• P.K. FARAYIBI, T.E. ABIOYE, J.W. MURRAY, P.K. KINNELL and A.T. CLARE, 2014. Surface improvement of laser clad Ti–6Al–4V using plain waterjet and pulsed electron beam irradiation Journal of Materials Processing Technology.218, 1-11
• HIRSCH, MATTHIAS, DEDENBACH, JOHANNES, LAWES, SIMON and CLARE, ADAM T, 2014. In situ low-cost and adaptable braze tool evaluation system with vision analysis Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
• KAWANAKA, T., KATO, S., KUNIEDA, M., MURRAY, J. W. and CLARE, A. T., 2014. Selective surface texturing using electrolyte jet machining. In: AXINTE, D., CLARE, A. and KINNELL, P., eds., 2nd Cirp Conference on Surface Integrity 13. Elsevier Science Bv. 345-349

2013

• MURRAY, J.W., KINNELL, P.K., CANNON, A.H., BAILEY, B. and CLARE, A.T., 2013. Surface finishing of intricate metal mould structures by large-area electron beam irradiation Precision Engineering. 37(2), 443-450
• MURRAY, J.W., FAY, M.W., KUNIEDA, M. and CLARE, A.T., 2013. TEM study on the electrical discharge machined surface of single-crystal silicon Journal of Materials Processing Technology. 213(5), 801-809
• WALKER, J.C., COOK, R.B., MURRAY, J.W. and CLARE, A.T., 2013. Pulsed electron beam surface melting of CoCrMo alloy for biomedical applications Wear. 301(1-2), 250-256
• C.LI, J. MURRAY, K.T. VOISEY, A.T. CLARE and D.G MCCARTNEY, 2013. Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation Applied Surface Science. 280, 431–438
• T.E. ABIOYE, J. FOLKES and A.T. CLARE, 2013. A parametric study of inconel 625 wire laser deposition Journal of Materials Processing Technology.
• OKADA, AKIRA, OKAMOTO, YASUHIRO, CLARE, ADAM and UNO, YOSHIYUKI, 2013. Fundamental study on releasability of molded rubber from mold tool surface The International Journal of Advanced Manufacturing Technology. 1-7
• ABIOYE T.E., FOLKES J., CLARE A.T., MCCARTNEY D.G., 2013. Concurrent Inconel 625 wire and WC powder laser cladding: Process stability and microstructural characterisation Surface Engineering.
• CLARE A.T., OYELOLA O., ABIOYE T.E., FARAYIBI P.K., 2013. Laser cladding of rail steel with Co-Cr Surface Engineering. 29(10), 731-736
• FARAYIBI P.K., FOLKES J.A., CLARE A.T., 2013. Laser deposition of Ti-6Al-4V wire with WC powder for functionally graded components Materials and Manufacturing Processes. 28(5),

2012

• MURRAY, J, CLARE, A.T, 2013. Improved surface properties of EDM components after irradiation by pulsed electronsIn: Proceedings of the 37th International MATADOR 2012 Conference. 71-74
• WALKER, J.C., MURRAY, J., NARANIA, S. and CLARE, A.T., 2012. Dry sliding friction and wear behaviour of an electron beam melted hypereutectic Al–Si alloy Tribology Letters. 45(1), 49-58
• MURRAY, J., ZDEBSKI, D. and CLARE, A.T., 2012. Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM Journal of Materials Processing Technology. 212(7), 1537-1547
• D. LO PRESTI, C.FECAROTTI, A.T. CLARE, A. LA ROCCA and G. AIREY, 2012. NEW HELICOIDAL SPINDLE FOR MIXING AND VISCOSITY MEASUREMENTS OF TIRE RUBBER MODIFIED BINDERS In: 5th Eurasphalt & Eurobitume Congress. (In Press.)
• J. MURRAY and A.T. CLARE*, 2012. Repair of EDM Induced Surface Cracks by Pulsed Electron Beam IrradiationJournal of Materials Processing Technology.
• A. T. CLARE*, OYELOLA O, FARAYIBI, P and FOLKES, J, 2012. LASER CLADDING FOR RAILWAY REPAIR AND PREVENTATIVE MAINTENANCE: RAIL REPAIR AND PREVENTATIVE MAINTENANCE Journal of Laser Applications.
• P. K. FARAYIBI, J. A. FOLKES and A. T. CLARE*, 2012. Laser Deposition of Ti-6Al-4V Wire with WC Powder for Functionally Graded Components Materials and Manufacturing Processes.
• T. E. ABIOYE, J. FOLKES, A. T. CLARE* and D. G. MCCARTNEY, 2012. Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation Surface Engineering.
• A.T. CLARE*, O. OYELOLA, T.E. ABIOYE and P. K. FARAYIBI, 2012. Laser Cladding of Rail Steel with Co-Cr Surface Engineering.
• P. K. FARAYIBI, T.E. ABIOYE and A.T. CLARE, 2012. Microstructural Characterisation and Wear Performance of Laser Deposited Ti-6Al-4V Wire/WC Powder In: 26th International Conference on Surface Modification Technologies at Lyon, France.
• P. K. FARAYIBI, A.T. CLARE, J.A. FOLKES and D.G. MCCARTNEY, 2012. Laser Deposition of Ti-6Al-4V Wire with Varying WC composition for Functionally Graded Components In: 37th MATADOR Conference at The University of Manchester, UK.

2011

• FARAYIBI, P.K., FOLKES, J., CLARE, A. and OYELOLA, O., 2011. Cladding of pre-blended Ti-6Al-4V and WC powder for wear resistant applications Surface and Coatings Technology. 206(2-3), 372-377
• 2011. Laser Cladding For Railway Repair And Preventative Maintenance In: The International Congress on Applications of Lasers & Electro-Optics (ICALEO). 240-249
• FARAYIBI, P, FOLKES, J and CLARE, AT, 2011. Influence Of Process Parameters And Energy Density On The Microstructure Of Ti-6al-4v Wire/Wc Powder Cladding In: The International Congress on Applications of Lasers & Electro-Optics (ICALEO),.
• CLARE, AT, FOLKES, J, FARAYIBI, P, SEGAL J and OYELOLA O, 2011. Laser deposition from white metals to hard facing materials (sic) In: Industrial Laser Applications Symposium (ILAS).
• CLARE, AT, FOLKES, J, FARAYIBI, P and OYELOLA O, 2011. Laser Cladding For Railway Repair And Preventative Maintenance Journal of Laser Applications. 24(3), 240-249

2010 and before

• CLARE, A.T., GAO, L., BRKIĆ, B., CHALKER, P.R. and TAYLOR, S., 2010. Linear ion trap fabricated using rapid manufacturing technology Journal of the American Society for Mass Spectrometry. 21(2), 317-322
• BRKIĆ, B., FRANCE, N., CLARE, A.T., SUTCLIFFE, C.J., CHALKER, P.R. and TAYLOR, S., 2009. Development of quadrupole mass spectrometers using rapid prototyping technology Journal of the American Society for Mass Spectrometry. 20(7), 1359-1365
• ETINDER SINGH, C. HAUSER, A.T. CLARE, P.R. CHALKER and C.J. SUTCLIFFE, 2009. Customized Layer Deposition for Rapid Prototyping In: International Solid Freeform Fabrication Symposium.
• CLARE, AT, CHALKER, PR, JETINDER SINGH, C. HAUSER and SUTCLIFFE, CJ, 2009. Rapid Prototyping for Chemical Reactor and Chemical Analysis Applications In: International Solid Freeform Fabrication Symposium.
• C. HAUSER, CLARE, AT, D.M. LEWIS, P.J. BROADBENT and C.J. SUTCLIFFE, 2009. Polymer Ink Development and Adaptive Slicing Techniques in Three Dimensional Printing In: International Solid Freeform Fabrication Symposium.
• CLARE, AT, CHALKER, PR, DAVIES, S, SUTCLIFFE, CJ and TSOPANOS, S, 2008. Selective Laser Sintering Of Barium Titanate-Polymer Composite Films Journal Of Materials Science. 43(9), 3197-3202
• CHALKER, PR, CLARE, AT, TSOPANOS, S, SUTCLIFFE, CJ and DAVIES, S, 2006. Selective laser melting of high aspect ratio 3D nickel-titanium structures for MEMS applications MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDING. 890, 93-98
• CLARE, AT, CHALKER, PR, DAVIES, S, TSOPANOS, S and SUTCLIFFE, CJ, Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN. 4(2), 181-187