Course information
-
This course is accredited by the Institution of Mechanical Engineers (IMechE) and the Institution of Engineering Designers (IED) on behalf of the Engineering Council indicating that it fully meets the academic requirement for registration as a Chartered Engineer.
This course is accredited by the Institution of Mechanical Engineers (IMechE) and the Institution of Engineering Designers (IED) on behalf of the Engineering Council indicating that it fully meets the academic requirement for registration as a Chartered Engineer.
-
Start date:September 2024September 2024
-
- IB score
- 38
- IB requirements
including Mathematics: Analysis and Approaches - 6 at Higher Level or 7 at Standard Level or Mathematics: Applications and Interpretation – 6 at Higher Level only (plus Physics at Higher or Standard Level).
- IELTS
6.0 (no less than 5.5 in any element)
English language requirements
As well as IELTS (listed above), we also accept other English language qualifications. This includes TOEFL iBT, Pearson PTE, GCSE, IB and O level English. Check our English language policies and equivalencies for further details.
For presessional English or one-year foundation courses, you must take IELTS for UKVI to meet visa regulations.
If you need support to meet the required level, you may be able to attend a Presessional English for Academic Purposes (PEAP) course. Our Centre for English Language Education is accredited by the British Council for the teaching of English in the UK.
If you successfully complete your presessional course to the required level, you can then progress to your degree course. This means that you won't need to retake IELTS or equivalent.
- High school qualifications
Check our country-specific information for guidance on qualifications from your country
- A level
- A*AA
- Required subjects
A in Maths and either Physics (preferred) or Further Maths as a 2nd subject, or Maths with any two of the following: Chemistry, Biology, Design, Economics, Psychology, Electronics, Computer Science. If you are predicted AAA or above and are not taking Physics or Further Maths, we will accept one of Chemistry, Biology, Design, Economics, Psychology, Electronics, Computer Science.
- Excluded subjects
Excluding General Studies, Critical Thinking, Citizenship Studies, CIE Global Perspectives and Research, CIE Thinking Skills.
- Additional entry requirements
All candidates are considered on an individual basis and we accept a broad range of qualifications. The entrance requirements below apply to 2023 entry.
A*AA
Please note: Applicants whose backgrounds or personal circumstances have impacted their academic performance may receive a reduced offer. Please see our contextual admissions policy for more information.
- Non-UK entry requirements
Alternative qualifications
We recognise that applicants have a wealth of different experiences and follow a variety of pathways into higher education.
Consequently we treat all applicants with alternative qualifications (besides A-levels and the International Baccalaureate) on an individual basis, and we gladly accept students with a whole range of less conventional qualifications including:
- Access to HE Diploma
- Advanced Diploma
- BTEC HND/HNC
- BTEC Extended Diploma
This list is not exhaustive. The entry requirements for alternative qualifications can be quite specific; for example you may need to take certain modules and achieve a specified grade in those modules. Please contact us to discuss the transferability of your qualification. Please see the alternative qualifications page for more information.
Contextual offers
We recognise the potential of talented students from all backgrounds. We make contextual offers to students whose personal circumstances may have restricted achievement at school or college. These offers are usually one grade lower than the advertised entry requirements. To qualify for a contextual offer, you must have Home/UK fee status and meet specific criteria – check if you’re eligible.
BTEC or Access courses not accepted for MEng course.
Foundation progression options
A foundation year is available for those with BBB grades
Mature Students
At the University of Nottingham, we have a valuable community of mature students and we appreciate their contribution to the wider student population. You can find lots of useful information on the mature students webpage.
Visa restrictions
International students must have valid UK immigration permissions for any courses or study period where teaching takes place in the UK. Student route visas can be issued for eligible students studying full-time courses. The University of Nottingham does not sponsor a student visa for students studying part-time courses. The Standard Visitor visa route is not appropriate in all cases. Please contact the university’s Visa and Immigration team if you need advice about your visa options.
- Access to HE Diploma
- Other requirements
NA
- Work experience
NA
- A level
- A*AA
- Required subjects
A in Maths and either Physics (preferred) or Further Maths as a 2nd subject, or Maths with any two of the following: Chemistry, Biology, Design, Economics, Psychology, Electronics, Computer Science. If you are predicted AAA or above and are not taking Physics or Further Maths, we will accept one of Chemistry, Biology, Design, Economics, Psychology, Electronics, Computer Science.
- Excluded subjects
Excluding General Studies, Critical Thinking, Citizenship Studies, CIE Global Perspectives and Research, CIE Thinking Skills.
- IB score
- 38
- IB requirements
including Mathematics: Analysis and Approaches - 6 at Higher Level or 7 at Standard Level or Mathematics: Applications and Interpretation – 6 at Higher Level only (plus Physics at Higher or Standard Level).
- Additional entry requirements
All candidates are considered on an individual basis and we accept a broad range of qualifications. The entrance requirements below apply to 2023 entry.
A*AA
Please note: Applicants whose backgrounds or personal circumstances have impacted their academic performance may receive a reduced offer. Please see our contextual admissions policy for more information.
- UK entry requirements
Alternative qualifications
We recognise that applicants have a wealth of different experiences and follow a variety of pathways into higher education.
Consequently we treat all applicants with alternative qualifications (besides A-levels and the International Baccalaureate) on an individual basis, and we gladly accept students with a whole range of less conventional qualifications including:
- Access to HE Diploma
- Advanced Diploma
- BTEC HND/HNC
- BTEC Extended Diploma
This list is not exhaustive. The entry requirements for alternative qualifications can be quite specific; for example you may need to take certain modules and achieve a specified grade in those modules. Please contact us to discuss the transferability of your qualification. Please see the alternative qualifications page for more information.
Contextual offers
We recognise the potential of talented students from all backgrounds. We make contextual offers to students whose personal circumstances may have restricted achievement at school or college. These offers are usually one grade lower than the advertised entry requirements. To qualify for a contextual offer, you must have Home/UK fee status and meet specific criteria – check if you’re eligible.
BTEC or Access courses not accepted for MEng course.
Foundation progression options
A foundation year is available for those with BBB grades
Mature Students
At the University of Nottingham, we have a valuable community of mature students and we appreciate their contribution to the wider student population. You can find lots of useful information on the mature students webpage.
- Access to HE Diploma
- Other requirements
NA
- Work experience
NA
-
UCAS Code:H30VH30V
-
Compulsory year abroad
On this course, you can apply to study abroad in your third year at one of our partner institutions or at University of Nottingham Malaysia.
If you are successful in applying to study abroad, you will get the opportunity to broaden your horizons and enhance your CV by experiencing another culture. Teaching is typically in English, but there may be opportunities to study in another language if you are sufficiently fluent.
Your study abroad year will include compulsory content matched to what you would have studied in the UK with optional content drawn from modules offered at the host university.
Please note
In order to undertake the year abroad, you will need to achieve the relevant academic requirements as set by the university and meet the selection criteria of both the university and the partner institution. The partner institution is under no obligation to accept you even if you do meet the relevant criteria. If you do not secure a year abroad opportunity, or choose not to go abroad, you will be transferred to the version of the course without the year abroad element, and you will complete all years of study at University of Nottingham, UK.
Placements
In addition to your study abroad year you can seek summer industrial placements in the other years of the course.
It is not possible to include a full year industrial placement in this course because of the study abroad year.
Important information
Please be aware that study abroad, compulsory year abroad, optional placements/internships and integrated year in industry opportunities may change at any time for a number of reasons, including curriculum developments, changes to arrangements with partner universities or placement/industry hosts, travel restrictions or other circumstances outside of the university’s control. Every effort will be made to update this information as quickly as possible should a change occur.
Compulsory year abroad
On this course, you can apply to study abroad in your third year at one of our partner institutions or at University of Nottingham Malaysia.
If you are successful in applying to study abroad, you will get the opportunity to broaden your horizons and enhance your CV by experiencing another culture. Teaching is typically in English, but there may be opportunities to study in another language if you are sufficiently fluent.
Your study abroad year will include compulsory content matched to what you would have studied in the UK with optional content drawn from modules offered at the host university.
Please note
In order to undertake the year abroad, you will need to achieve the relevant academic requirements as set by the university and meet the selection criteria of both the university and the partner institution. The partner institution is under no obligation to accept you even if you do meet the relevant criteria. If you do not secure a year abroad opportunity, or choose not to go abroad, you will be transferred to the version of the course without the year abroad element, and you will complete all years of study at University of Nottingham, UK.
Placements
In addition to your study abroad year you can seek summer industrial placements in the other years of the course.
It is not possible to include a full year industrial placement in this course because of the study abroad year.
Important information
Please be aware that study abroad, compulsory year abroad, optional placements/internships and integrated year in industry opportunities may change at any time for a number of reasons, including curriculum developments, changes to arrangements with partner universities or placement/industry hosts, travel restrictions or other circumstances outside of the university’s control. Every effort will be made to update this information as quickly as possible should a change occur.
-
*For full details including fees for part-time students and reduced fees during your time studying abroad or on placement (where applicable), see our fees page.
If you are a student from the EU, EEA or Switzerland, you may be asked to complete a fee status questionnaire and your answers will be assessed using guidance issued by the UK Council for International Student Affairs (UKCISA).
Additional costs
All students will need at least one device to approve security access requests via Multi-Factor Authentication (MFA). We also recommend students have a suitable laptop to work both on and off-campus. For more information, please check the equipment advice.
As a student on this course, you should factor some additional costs into your budget, alongside your tuition fees and living expenses:
- Books - You can access all the essential course books through our libraries and there is usually no need to purchase your own copies. Should you wish to do so, these vary in cost but would be around £30-£80 per book depending upon whether you buy new or pre-owned, paper or electronic.
- Printing – There is little need to print as coursework is submitted online and teaching materials provided electronically. If you do wish to print, black and white printing costs 4p per side.
- Trips – The department covers the travel cost of compulsory field trips.
- PPE – This course does not require PPE items to be bought. Workshop PPE is provided to you in the first year for the duration of your course. Any other essential requirements are met with no cost involved.
- Summer work placement - If you do a work placement, any costs associated with travel or accommodation will need to be factored in as they are not covered by your fees.
- Year abroad - You will need to consider the travel and living costs for the country you choose. This could include visa costs and medical insurance.
- Design Materials – Materials for use in design projects are supplied.
- PC device – Although there are PCs available for your use on campus, you will need to purchase your own device. Read more about our recommended specifications.
- Calculator - While the calculator you used for your former study is usually sufficient some students will choose to purchase a new calculator which will cost around £10.
Please note that these figures are approximate and subject to change.
There may also be costs issued by the university for replacement student ID cards, additional transcripts or certification letters, reassessments and library fines.
Scholarships and bursaries
The University of Nottingham offers a wide range of bursaries and scholarships. These funds can provide you with an additional source of non-repayable financial help. For up to date information regarding tuition fees, visit our fees and finance pages.
Faculty-specific funding
In addition to the above, students applying to the Faculty of Engineering may be eligible for faculty-specific or industry scholarships.
International students
We offer a range of international undergraduate scholarships for high-achieving international scholars who can put their Nottingham degree to great use in their careers.
*For full details including fees for part-time students and reduced fees during your time studying abroad or on placement (where applicable), see our fees page.
If you are a student from the EU, EEA or Switzerland, you may be asked to complete a fee status questionnaire and your answers will be assessed using guidance issued by the UK Council for International Student Affairs (UKCISA).
Additional costs
All students will need at least one device to approve security access requests via Multi-Factor Authentication (MFA). We also recommend students have a suitable laptop to work both on and off-campus. For more information, please check the equipment advice.
As a student on this course, you should factor some additional costs into your budget, alongside your tuition fees and living expenses:
- Books - You can access all the essential course books through our libraries and there is usually no need to purchase your own copies. Should you wish to do so, these vary in cost but would be around £30-£80 per book depending upon whether you buy new or pre-owned, paper or electronic.
- Printing – There is little need to print as coursework is submitted online and teaching materials provided electronically. If you do wish to print, black and white printing costs 4p per side.
- Trips – The department covers the travel cost of compulsory field trips.
- PPE – This course does not require PPE items to be bought. Workshop PPE is provided to you in the first year for the duration of your course. Any other essential requirements are met with no cost involved.
- Summer work placement - If you do a work placement, any costs associated with travel or accommodation will need to be factored in as they are not covered by your fees.
- Year abroad - You will need to consider the travel and living costs for the country you choose. This could include visa costs and medical insurance.
- Design Materials – Materials for use in design projects are supplied.
- PC device – Although there are PCs available for your use on campus, you will need to purchase your own device. Read more about our recommended specifications.
- Calculator - While the calculator you used for your former study is usually sufficient some students will choose to purchase a new calculator which will cost around £10.
Please note that these figures are approximate and subject to change.
There may also be costs issued by the university for replacement student ID cards, additional transcripts or certification letters, reassessments and library fines.
Scholarships and bursaries
The University of Nottingham offers a wide range of bursaries and scholarships. These funds can provide you with an additional source of non-repayable financial help. For up to date information regarding tuition fees, visit our fees and finance pages.
Faculty-specific funding
In addition to the above, students applying to the Faculty of Engineering may be eligible for faculty-specific or industry scholarships.
Home students*
Over one third of our UK students receive our means-tested core bursary, worth up to £1,000 a year. Full details can be found on our financial support pages.
* A 'home' student is one who meets certain UK residence criteria. These are the same criteria as apply to eligibility for home funding from Student Finance.
Course overview
Do you want to push the boundaries of engineering to solve complex problems to improve the sustainability and efficiency of the world we live in? This course will give you opportunity to combine your initiative, numeracy skills and detailed subject knowledge to make modern industry work better for us all.
Mechanical engineering plays a vital role in many industries including aerospace, manufacturing, medicine, renewable energy and Formula 1. In fact, there is little in our daily lives that isn't touched by mechanical engineering innovations, from the cars we drive to the way our food is processed.
Course overview
Do you want to push the boundaries of engineering to solve complex problems to improve the sustainability and efficiency of the world we live in? This course will give you opportunity to combine your initiative, numeracy skills and detailed subject knowledge to make modern industry work better for us all.
Mechanical engineering plays a vital role in many industries including aerospace, manufacturing, medicine, renewable energy and Formula 1. In fact, there is little in our daily lives that isn't touched by mechanical engineering innovations, from the cars we drive to the way our food is processed.
As well as taught sessions, you'll have access excellent manufacturing research facilities, including robotics and 3D printing techniques. You will also apply your knowledge in individual and group project settings.
Mechanical and manufacturing engineering share a common programme for the first two years, where you will learn the fundamentals of engineering science and design. In the third year you will specialise in mechanical engineering options.
This is a four-year course and you will have the opportunity to spend year three studying abroad.
Why choose this course?
- 11th in the UK for Mechanical and Manufacturing Engineering (The Times Good University Guide 2023)
- Get paid experience with opportunities for a year out in industry
- Customise your degree to suit your interests with a wide selection of optional modules
Important information
This online prospectus has been drafted in advance of the academic year to which it applies. Every effort has been made to ensure that the information is accurate at the time of publishing, but changes (for example to course content) are likely to occur given the interval between publishing and commencement of the course. It is therefore very important to check this website for any updates before you apply for the course where there has been an interval between you reading this website and applying.
Modules
Mandatory
Year 1
Dynamics of Mechanical Systems
Mandatory
Year 1
Statistics and Mechanics of Solids
Mandatory
Year 1
Engineering Design and Design Project
Mandatory
Year 1
Materials and Manufacturing
Mandatory
Year 1
Programming, Professional and Laboratory Skills
Mandatory
Year 1
Thermodynamics and Fluid Mechanics 1
Mandatory
Year 1
Mathematics for Engineers
Mandatory
Year 2
Design, Manufacture and Project
Mandatory
Year 2
Dynamics
Mandatory
Year 2
Electromechanical Devices
Mandatory
Year 2
Engineering Management 1
Mandatory
Year 2
Materials in Design
Mandatory
Year 2
Mathematics and Statistics
Mandatory
Year 2
Mechanics of Solids 2
Mandatory
Year 2
Thermodynamics and Fluid Mechanics 2
Mandatory
Year 3
Engineering Management 2
Mandatory
Year 3
Computer Modelling Techniques
Mandatory
Year 3
BEng Individual Project
Optional
Year 3
Advanced Dynamics of Machines
Optional
Year 3
Stress Analysis Techniques
Optional
Year 3
Aerospace
Optional
Year 3
Automotive
Optional
Year 3
Bioengineering
Optional
Year 3
Design
Optional
Year 3
Human Factors
Optional
Year 3
Materials
Optional
Year 3
Manufacturing
Optional
Year 3
Mechatronics
Optional
Year 3
Sustainability
Optional
Year 3
Thermofluids 3
Mandatory
Year 4
Advanced Technology Review (autumn)
Mandatory
Year 4
Integrated Systems Analysis
Mandatory
Year 4
MEng Individual Project
Optional
Year 4
Aerodynamics
Optional
Year 4
Aircraft Propulsion Systems
Optional
Year 4
Analysis and Design of Composites Bioengineering
Optional
Year 4
Automotive Vehicle Dynamics
Optional
Year 4
Computational Fluid Dynamics
Optional
Year 4
Entrepreneurship for Engineers
Optional
Year 4
Finite Element Analysis
Optional
Year 4
Technologies for the Hydrogen Economy
About modules
The above is a sample of the typical modules we offer but is not intended to be construed and/or relied upon as a definitive list of the modules that will be available in any given year. Modules (including methods of assessment) may change or be updated, or modules may be cancelled, over the duration of the course due to a number of reasons such as curriculum developments or staffing changes. This content was last updated on Friday 17 March 2023.
A major Group Design & Make project makes up a third of your studies. This may involve working with industry, local hospitals or schools. The project will help you to develop a number of essential skills, invaluable for your future career. You will also study a mix of compulsory and optional modules, the latter allowing you to tailor the course to your interests.
This year will be spent studying abroad in either China or Malaysia.
Core
- Engineering Management 2
- Computer Modelling Techniques
- BEng Individual Project
Optional
- Advanced Dynamics of Machines
- Stress Analysis Techniques
- Thermofluids
Further optional modules with the following subject areas
- Aerospace
- Automotive
- Bioengineering
- Design
- Human Factors
- Materials
- Manufacturing
- Mechatronics
- Sustainability
Optional modules
Students must take between 10 and 30 credits from:
- Introduction to Automotive Technology
- Computer Aided Engineering
- Introduction to Turbulence and Turbulent Flows
- Internal Combustion Engines
- Studying Human Performance
- Polymer Engineering
And between 20 and 50 credits from:
- Biomechanics
- Computational Fluid Dynamics
- Aerodynamics
- Aircraft Propulsion Systems
- Automotive Vehicle Dynamics
- Finite Element Analysis
- Entrepreneurship for Engineers
- Technologies for the Hydrogen Economy
"
An introductory module covering analysis methods applicable to engineering design including:
Linear and rotational motion: Displacement, velocity and acceleration
Relationship between angular and linear motion
Newton's Laws for linear & rotational motion
Linear and Angular Momentum, including conservation of momentum
Work, Energy & Power, including kinetic & potential energy
Geared systems
Drive systems, including tangential drives and vehicles
Load characteristics and steady-state characteristics
Flywheel design
Static and dynamic balancing
An introductory module covering analysis methods applicable to engineering design including:
Review of basic mechanics: vectors, units, forces and moments, Newton’s laws
Static equilibrium: force and moment analysis in design; frictional forces
Free body diagrams and Pin-jointed structures
Stress, strain and elasticity
Multi-axial stress-strain; thin walled vessels under pressure
Shear stress and torsion of shafts
Plane stress; Mohr's circle analysis
Beam bending: shear force & bending moment diagrams
2nd moments of area of cross-sections
Bending stresses in beams
In this yearlong module you'll gain a deeper understanding of engineering design principles using practical project work. You'll learn CAD from the ground up, and by the end of the module you'll be well versed in the software.
Further you'll undertake practical workshops, where you'll learn how to use fundamental engineering machinery, which forms the basis of more advanced techniques you'll learn in higher level modules.
Topics covered include:
- Process of design supported by practical design activities
- Engineering drawing CAD solid modelling and drawing generation
- Machine elements Group Design Project with Integrated Individual Element
- Machine shop practical training
A deep understanding of both materials and manufacturing techniques used to process these materials is essential for all product designers, to produce effective and commercially viable products. This year long module introduces students to the properties of materials, the main failure mechanisms which a designer will be concerned with (e.g overload, fracture, creep, fatigue) and core manufacturing methods used in engineering applications.
It includes the following topics:
- Role of materials and material properties in the design process.
- Selection and use of materials.
- Basic science underlying material properties Approaches to avoid failure of materials.
- Introduction to manufacturing in the UK.
- Casting, machining, moulding, forming, powder processing, heat treatment, surface finishing and assembly.
- Introduction into additive manufacturing an introduction to manufacturing metrology.
This year long module comprises a number of elements to provide you with:
- professional engineering, information searching, data analysis, health and safety and oral presentations
- laboratory skills and development of house style laboratory report
- writing and understanding of computer programs including, loops, conditional statements, program flow, functions, basic input output, sound processing, image processing, variables, (1/2D) arrays, advanced plotting and simple computer graphics.
- the application of computer code to control mechanical devices as part of a group project.
- introduction to professional responsibilities of engineers including the fundamental role of sustainability, legal issues, patents, ethics and standards
This is an introductory module covering the fundamental concepts and principles of thermofluids and their applications to engineering problems. Topics covered include:
- introductory concepts; properties of fluids, equations of state and the perfect gas law
- hydrostatics The first and second law of thermodynamics, including heat engines
- fluid dynamics: continuity, Euler and Bernoulli equations
- processes undergone by closed systems
- the steady flow energy equation
- momentum flows including linear momentum, friction factors and pipe flows
- heat transfer
This module introduces a range of fundamental elementary mathematical techniques that can be applied to mechanical engineering, manufacturing and product design problems.
The aim of the module is to provide engineering students with a base in mathematical knowledge which can then be built on if required in subsequent years, however as a product design student this will be the only maths module you will undertake.
This module includes:
- The calculus of a single variable, extended to develop techniques used in analysing engineering problems
- Advanced differential and integral calculus of one variable
- First-order ordinary-differential equations
- Algebra of complex numbers
- Matrix algebra and its applications to systems of equations and eigenvalue problems
- Functions and their properties
- Vector spaces and their applications
- Vector calculus
This module will introduce design methodology through the entire design cycle from establishing users' needs and generating creative concepts to developing fabricable engineered solutions.
You will develop knowledge of machine elements and mechanical systems and develop enhanced skills in communicating effectively in a team environment and operating machine tools for manufacturing and testing of design.
This module aims to introduce concepts of rigid body dynamics, vibrations and feedback control, and develop the student's ability to analyse these aspects in simplified engineering situations.
This module seeks to develop an understanding of materials in design across a wide range of engineering applications. The module is arranged in 4 blocks covering designing with light alloys, polymers, composites, and functional materials. This covers important functional ceramics as well as other functional materials. Each block will explore the design requirements in detail of a particular case study followed by other examples, key material properties relevant to the engineering application, manipulation of the microstructure through processing and example calculations against failure of the product/component. This module will explore:
- Material Attributes
- Engineering Context
- Manufacturing of Material
- Production Processes
- Environmental Impact
The aim of this module is to introduce more advanced topics in linear elastic solid mechanics, plasticity and failure, introduce relevant analysis methods for this materials behaviour and demonstrate the application of these methods to the design of engineering components.
In this module you will apply concepts and principles of thermofluids to fluid mechanics, thermodynamics and heat transfer situations in simplified applied situations.
This module aims to provide students with a basic knowledge and understanding of the main stream computer modelling techniques used in modern engineering practice, including Finite Element, Finite Difference and Finite Volume methods.
Topics covered will include:
- Introduction to numerical methods in engineering
- Finite Element Analysis (FEA) of structures
- Computational Fluid Dynamics (CFD) for thermo-fluids problems
- Coursework on running FEA and CFD software
The project aims to give you experience in the practice of manufacturing engineering at a professional level. It involves the planning, execution and reporting of a programme of work which will normally involve a mixture of experimental, theoretical and computational work together with a review of relevant previous work in the field. The detailed content is a matter for discussion between the student and their supervisor.
This module covers advanced concepts and analytical techniques used to analyse the dynamics of mechanical systems. You will develop understanding, familiarity and knowledge of the analysis techniques required to describe the dynamical and vibration behaviour of mechanical systems moving in 2 and 3 dimensions.
This is an advanced module dealing with experimental, analytical and numerical methods for determining stresses and deformations in complex engineering components. Some of the topics covered include: membrane stresses; Beams on elastic foundations; Bending of flat plates; and experimental stress analysis methods.
Delivery
| Activity | Number of Weeks | Number of sessions | Duration of a session |
|---|---|---|---|
| Lecture | 12 weeks | 1 week | 4 hours |
Assessment method
| Assessment Type | Weight | Requirements |
|---|---|---|
| Exam | 100.00 | One 2 hour exam |
This module covers:
• Conduction heat transfer - thermal conductivity, thermal resistance networks. Analytical and numerical solutions for one- and two-dimensional steady-state conduction and for one-dimensional transient and unsteady conduction.
• Convection heat transfer - general concepts and phenomena, velocity and thermal boundary layers, Reynolds analogy, use of experimental correlations for internal and external flows, enhancement techniques for convective heat transfer.
• Introduction to boiling and condensation heat transfer
• Radiation heat transfer - black body emission, emissivity, absorptivity, transmissivity, Kirchhoff's law, black body radiation heat transfer, view factors, grey body radiation exchange, radiation networks.
• Introduction to mass transfer
• Case studies including problems involving combined modes of heat transfer, use of resistance networks for steady and unsteady heat transfer calculations.
This module exposes you to topics relevant to engineers today that are new and/or developing rapidly and which may be associated with important segments of the UK economy. The aim of the Case Study is to develop your skills in acquiring, assimilating, synthesising and presenting technical and business information in an appropriate form based on sound research.
This module covers topics aligned to the design, description and analysis of dynamically complex, integrated systems. The module is motivated by the recognition that the processes and concerns associated with designing and validating systems are distinct from those connected with designing and validating components.
The project aims to give experience in the practice of engineering at a professional level. It involves the planning, execution and reporting of a programme of work which will normally involve a mixture of experimental, theoretical and computational work together with a review of relevant previous work in the field.
This module aims to develop your understanding and application skills of basic concepts and fundamental knowledge in fluid mechanics in aerospace engineering. You will study a range of topics: Applied aerodynamics fundamentals and several relevant theories.
The aim of this module is to provide you with an understanding of the basic thermo-fluid principles of aircraft propulsion and gas turbine engines. You will develop your knowledge of the layout and design principles of jet engines and how individual components can be designed to achieve the required performance.
In this module you’ll develop an advanced understanding of fluid mechanics. You’ll use computational methods in fluid mechanics to further understand how techniques are applied to real fluid engineering problems. For example, you’ll study fluid/structure interactions, air flow, channel flow and water wave propagation. You’ll spend between two and four hours in lectures and two hours in computing sessions each week.
This module will allow the theoretical background needed to understand linear Finite Element analysis. To present a number of examples to illustrate how practical problems can be analysed using FE software.
You will cover the following topics:
- Structural analysis
- Derivation of finite element equations using energy considerations
- Linear and quadratic elements
- Beam, plate and shell elements
- Practical applications of finite elements in stress analysis problems
- Examples of finite element applications
- Introduction to thermal problems
- Introduction to non-linear problems
Teaching methods
- Group study
- Independent study
- Lab sessions
- Lectures
- Practical classes
- Supervision
- Tutorials
- Workshops
Assessment methods
- Coursework
- Dissertation
- Examinations
- Group coursework
- Presentation
- Research project
- Practical assessment
During year three, you will have a unique opportunity to see your academic subject from a different perspective by studying a year abroad in China or Malaysia. As well as starting an international network of contacts, you will discover new strengths and abilities – helping to enhance your future employment prospects. The curriculum is exactly the same as the UK and all teaching is in English.
At the end of the second year, optional modules are available to help tailor your degree to your specific interests and career aspirations.
You will gain a broad knowledge of engineering science and engineering design - the essential skills to work in industry as a mechanical engineer. You will have developed skills in problem solving through group and individual project work and have an appreciation of the business environment in which engineers work.
Our graduates work for a diverse range of employment sectors with companies including:
- Jaguar Land Rover
- Tata Steel
- Procter & Gamble
- Rolls-Royce
- Ford
- Thales
Average starting salary and career progression
83.2% of undergraduates from the Department of Mechanical, Materials and Manufacturing Engineering secured graduate level employment or further study within 15 months of graduation. The average annual salary for these graduates was £29,073.*
* HESA Graduate Outcomes 2020. The Graduate Outcomes % is derived using The Guardian University Guide methodology. The average annual salary is based on graduates working full-time within the UK.
Studying for a degree at the University of Nottingham will provide you with the type of skills and experiences that will prove invaluable in any career, whichever direction you decide to take.
Throughout your time with us, our Careers and Employability Service can work with you to improve your employability skills even further; assisting with job or course applications, searching for appropriate work experience placements and hosting events to bring you closer to a wide range of prospective employers.
Have a look at our careers page for an overview of all the employability support and opportunities that we provide to current students.
The University of Nottingham is consistently named as one of the most targeted universities by Britain’s leading graduate employers (Ranked in the top ten in The Graduate Market in 2013-2023, High Fliers Research).
Your Campus - University Park
University Park Campus covers 300 acres, with green spaces, wildlife, period buildings and modern facilities. It is one of the UK's most beautiful and sustainable campuses, winning a national Green Flag award every year since 2003.
This course has enhanced my love for engineering and I have thoroughly enjoyed the diversity of the engineering modules involved. It has given me the opportunity to explore different sectors and has helped me decide what I want to specialise in.
Maryam Sebzali
Course data
Related courses
Faculty of Engineering
4 years full-time
Aerospace Engineering MEng Hons
Qualification
MEng Hons
Entry requirements
A*AA
UCAS code
H400
Faculty of Engineering
4 years full-time
Electrical Engineering with a Year Abroad MEng Hons
Qualification
MEng Hons
Entry requirements
AAA
UCAS code
H62U
Ask us anything
Our webpages contain detailed information about all processes in your student journey. Check them out alongside our student enquiry centre to find the information you need. If you’re still struggling, head to our help page where you can find details of how to contact us in-person and online.
