Triangle Triangle

Course overview

Spanning five years, our MEng degree including an industrial year will provide you with an advanced understanding of aerospace engineering, with the added benefit of gaining career enhancing industrial experience during your placement year.

Links with giants such as Boeing, Rolls-Royce Aerospace and Airbus coupled with our aerospace teaching and research facilities and our program of industrial guest lecturers bring the industry to life for our undergraduate students.

Years one and two

All students follow a common programme of study for the first two years, studying  material that provides a comprehensive core expertise in aerospace engineering and aircraft technology. Topics include flight mechanics, aircraft design, aerodynamics and engineering design and analysis.

Year two builds on year one, adding more advanced content in all the key areas including propulsion and control of aerospace systems.

Key to these first two years is a systems approach including an integrating design, make and test project along with laboratory and workshop elements. These enable students to not only gain a clear understanding of aerospace and engineering theory but also experience of their practical application.

Year three

In year three MEng students work in small groups on an Aerospace Group Design Project as well as undertaking core modules in management, professional practice, certification, safety and reliability and computer modelling techniques.

There are also a number of optional modules including Introduction to Space, Avionic Systems and Advanced Propulsion which gives students the opportunity to specialise in certain aspects of aerospace.

Year four

At the end of year three you will spend a year working in industry. You will gain first hand experience of the exciting challenges that are faced by aerospace engineers, and will significantly enhance your technical and managerial engineering skills.

During the placement, students are classed as employees of the host company, but also remain fully registered with the University and receive support from their tutor throughout the placement. The faculty has a dedicated  Placements Team who work closely with our Careers and Employability Team to support you in finding the right placement.

Year five

The final study year not only provides students with the opportunity to further advance their knowledge of aerospace engineering through a varied choice of module options, but also provides the chance to work on an individual research project and gain an insight into the aerospace industry with a core module in Aerospace Industry, Management and Technology.

These modules, coupled with the previous years of study, will ensure you're prepared to confidently enter the aerospace industry.

More information 

See also Mechanical EngineeringElectrical and Electronic Engineering and the Engineering and Science Foundation Year Programme.


Entry requirements

All candidates are considered on an individual basis and we accept a broad range of qualifications. The entrance requirements below apply to 2020 entry.

UK entry requirements
A level A*AA-AAA
Required subjects Maths is essential and physics is highly preferred; excluding General Studies, Critical Thinking, Citizenship Studies, CIE Global Perspectives and Research, CIE Thinking Skills.

A foundation year is available for those with BBB grades but not in the required subjects.
IB score 38-36 (6 in maths at Higher Level or 7 at Standard Level; plus preferably Physics at Higher or Standard Level) excluding Maths Studies.

Learning and assessment

How you will learn

How you will be assessed

Modules

Aerospace Aerodynamics

This module will give you with the knowledge, concepts and principles of fluid mechanics and aerodynamics. You will complete this module over the course of a year.

Topics covered are:

  • atmospheric physics
  • standard atmosphere
  • static pressure
  • hydrostatics
  • inviscid flows – conservation of mass and momentum
  • Euler and Bernoulli equations
  • Introduction to compressible conservation of viscous flows
  • Introduction to shock waves lifting surfaces – aerofoil and wings
  • basic forces
  • pressure distributions
  • fluid structure interaction phenomena
Aerospace Design and Materials

This year long module introduces students on the Aerospace Engineering courses to the basic concepts and practices of design and manufacture in an aerospace context and includes the following topics:

  • The process of concept generation through to detail design in an aerospace context
  • The use of computer aided engineering tools in the design processes
  • Part and assembly design using CATIA
  • Basic machine elements and their function
  • How materials, stress analysis and manufacturing disciplines fit within the framework of design
  • Machining processes and metrology
  • Lab-based demonstration of manufacturing processes
  • Machine shop practical training
  • An appreciation of modern working practices - interaction with technical staff and conveying design intent
Aerospace Electrical and Electronic Engineering 1

This year-long module provides a basic introduction to electrical and electronic devices, power transmission and the distribution and utilisation of electrical energy in an Aerospace Engineering context.

Topics covered are:

  • Electrical circuits: Resistors and Kirchhoff’s Laws, superposition, Gauss and Ampere Laws, Transient analysis of circuits, capacitance and inductance, phasors, AC circuits, 3-phase AC systems
  • Communications: introduction to signals (analogue and digital), basic electronic components (diodes, transistors and operational-amplifiers)
  • Electrical systems: electrical machines, electrical power sources in aircraft, transformers, power distribution to aircraft electrical systems, introduction to electrical loads in aircraft
Aerospace Statics and Dynamics

This year-long module introduces students on the Aerospace Engineering courses to the fundamental concepts and principles of solid mechanics and dynamics. It covers their application to simple engineering scenarios in an aerospace context.

Topics include:

  • Review of basic mechanics : vectors, units, forces and moments, Newton’s laws
  • Static equilibrium: force and moment analysis in design; frictional forces
  • Free body diagrams and Pin-jointed structures
  • Stress, strain and elasticity
  • Multi-axial stress-strain; thin walled vessels under pressure
  • Shear stress and torsion of shafts
  • Plane stress; Mohr's circle analysis
  • Beam bending: shear force & bending moment diagrams
  • 2nd moments of area of cross-sections
  • Bending stresses in beams
  • Linear and rotational motion: Displacement, velocity and acceleration
  • Relationship between angular and linear motion• Newton's Laws for linear & rotational motion
  • Linear and Angular Momentum, including conservation of momentum
  • Work, Energy & Power, including kinetic & potential energy
  • Geared systems
  • Drive systems, including tangential drives and vehicles
  • Load characteristics and steady-state characteristics
  • Flywheel design
  • Static and dynamic balancing
Aircraft Design and Performance

This year-long module introduces students on the Aerospace Engineering courses to the basic concepts and practices of aircraft design and flight mechanics. It covers the following topics:

  • Aircraft classification and configurations
  • Aircraft design procedures
  • Aircraft characteristics and performance
  • Preliminary aerodynamics analysis
  • Flight envelopes
  • Steady flight conditions
  • Static stability
Professional Engineering and Project 1

This year-long module comprises a number of elements and these are:

  • Essential professional engineering elements:, report writing, information searching, data analysis
  • Essential engineering study support elements: Maths, MATLAB, Using MS Excel, Word, Powerpoint
  • Essential project skills: team working, project management, MS Project

These skills will be covered to a level appropriate to first year aerospace engineering students.

In addition the module includes a year-long integrating group project element that draws in technical elements from the other 5 modules running in the first year of the course. An output from the project is a model scale aircraft designed to meet the specification set.

The above is a sample of the typical modules we offer but is not intended to be construed and/or relied upon as a definitive list of the modules that will be available in any given year. Modules (including methods of assessment) may change or be updated, or modules may be cancelled, over the duration of the course due to a number of reasons such as curriculum developments or staffing changes. Please refer to the module catalogue for information on available modules. This content was last updated on Thursday 13 August 2020.
Aerospace Design 2

This year long foundational module is a direct continuation of first year aerospace design, incorporating new information and methods as well as enabling practice of previously learned concepts. The module includes the following topics:

  • Sustainability issues in design
  • Design for manufacture considerations and cost
  • Machine elements function and correct selection
  • CNC processes
  • Group design project with manufacture of the finished design in the January workshop slot
  • Individual design and analysis project
  • Machine shop practical training
Aerospace Propulsion

You will learn fundamental thermodynamics including key underlying equation sets such as the first and second law of thermodynamics, perfect gas relationships and analysis of relevant cycles for Aerospace propulsion such as the Brayton cycle. The principles of aircraft propulsion are further developed with a focus on:

  • jet engines including the principles of gas turbine engines
  • layout and the application of compressible flow and turbomachinery principles
  • Factors influencing design and choice of engine configuration are introduced
Control of Aerospace Systems

This year long module introduces key principles of aerospace systems control, focusing on examples relevant to aerospace applications. Topics covered are:

  • Introduction to control systems design in aerospace context
  • Digital and analogue control systems
  • Fundamentals of aerospace electrical and electronic systems including
    • power generation and conversion
    • electric machines and drives
    • flight control actuation systems
Airframe and Materials

This module extends and deepens your knowledge of materials, concentrating on the composites and alloys used in aerospace structures and engines. An overview of current aerospace research will be used to highlight likely future developments.

Topics include:

  • Introduction to airframe
  • shear stress beams
  • deflection and conditions
  • column buckling
  • thin-walled structures
  • semi-monocoque structures
  • web-boom idealisation
  • static indeterminate structures
  • bending & torsion of single
  • multi-celled thin-walled beams
  • shear center
  • static and fatigue failure
Dynamics and Flight Mechanics

This module introduces concepts of rigid body dynamics and vibrations and develops your ability to analyse aspects in simplified engineering situations, as well as in analysing rigid aircraft dynamics.

This module covers the dynamics of point masses and rigid bodies. It considers both motion in an inertia frame, as well as in a moving reference frame. The principals of linearization of a nonlinear dynamical system are demonstrated and basic characteristics of linear systems are introduced.

Flight mechanics is progressed through the development of equations of motion for rigid aircraft. Ideas of equilibrium and trim are captured by determining the steady control inputs needed to fly simple steady trajectories. Based on the nonlinear equations, linearization about a trimmed point are considered, as well as the linear dynamic response of an aircraft and basic flight control.

Professional Engineering and Project 2

Within this module you will cover essential study skills, such as:

  • Maths
  • Report writing
  • Data analysis
  • Management

A year long group project will play a crucial role in your learning. The project will draw on learning from other modules within the year.

The above is a sample of the typical modules we offer but is not intended to be construed and/or relied upon as a definitive list of the modules that will be available in any given year. Modules (including methods of assessment) may change or be updated, or modules may be cancelled, over the duration of the course due to a number of reasons such as curriculum developments or staffing changes. Please refer to the module catalogue for information on available modules. This content was last updated on

Core

Aerospace Group Design Project

Within this project you will cover whole-vehicle development from requirements to virtual product definition, via concept formulation, preliminary design and performance evaluation. This will be supported by modelling and simulation. Work will be undertaken by teams of 6-8 students (typically). There will be a make and test element to the project and the produced hardware will be evaluated as part of the assessment.

At the end of the project you will have:

  • Technical Handbook (including Vehicle Characteristics)
  • Declaration of Design and Performance (including VCRM)
  • Technical Portfolio (including reports and coordination memos)
  • Management Portfolio (including meeting minutes and progress reports)
  • Virtual Product Model (plus associated models and simulations)
Computer Modelling Techniques

This module aims to provide students with a basic knowledge and understanding of the main stream computer modelling techniques used in modern engineering practice, including Finite Element, Finite Difference and Finite Volume methods.

Topics covered will include:

  • Introduction to numerical methods in engineering
  • Finite Element Analysis (FEA) of structures
  • Computational Fluid Dynamics (CFD) for thermo-fluids problems
  • Coursework on running FEA and CFD software
Management, Professional Practice, Certification, Safety and Reliability

This module covers management and professional practice elements essential to professional engineers. Included here are range of management techniques and tools including:

  • Life Cycle Costing
  • Project selection and evaluation including PERT
  • Financial evaluation
  • Risk Management; Evaluating risk, Risk contingency, Fault trees,
  • Failure Mode and Effect Analysis,
  • Programme Monitoring; Milestones, Earned Value Analysis, Cost and schedule performance indices,
  • Marketing; Marketing methods, Price and volume analysis, Customer evaluation, The power of brands,
  • Quality Management; Six-Sigma quality, Six-Sigma tools, Statistical process control,
  • An introduction to English Law; The origins or English law, The Legal Structure, Civil law, Criminal law, Contract law.Certification, safety and reliability in an aerospace context are covered. The underpinning legal framework is presented along with the relevant legal statutes such as rules of the air, airworthiness and pilot licensing. Case studies and guest lectures are used to support this element of the module.

Optional

Advanced Aerodynamics

This module extends and deepens knowledge of students on the Aerospace Engineering courses in aerodynamics in an aerospace context. It covers the following topics:

  • Lifting wing theories
  • Compressible flow in nozzles and diffusers
  • Shock wave theory and aerothermodynamics
  • Transonic flow – supercritical aerofoils, swept wing theory, wave drag, area rule
  • Supersonic flow – double-wedge aerofoils, delta wings, slender wing theory
  • Hypersonic flow – a brief introduction
  • Low- and high-speed flow control and drag reduction
Advanced Propulsion

This module will build on the knowledge in H42AEP/MECH2028 and widen the context and application to include considerations of the propulsion requirements of light aircraft, military applications and supersonic flight.

Alternative propulsion units such as ramjets, scramjets and rockets will be evaluated.  Propeller design knowledge from H42AEP/MECH2028 will be extended and Helicopter propulsion introduced.  Future propulsion technologies, including electrification of propulsion, will be appraised. 

Throughout these topics factors influencing design and choice of engine configuration will be evaluated.At the end of the module student will have a wider and deeper knowledge relating to propulsion choices for aerospace applications and be in a position to design the key elements of these propulsion system.

Avionic Systems

This module introduces avionics, providing a detailed introduction to all the major avionic systems on current civil and military aircraft and spacecraft. To help in understanding the concepts, a number of application examples will be included throughout the classes.

Topics covered are:

  • History of avionics;
  • Aircraft control including fly-by-wire and autopilot
  • Displays and man-machine interaction
  • Avionic systems in navigation;
  • Sensors in avionics;
  • Radar technology;
  • Electronic warfare;
  • Avionics applications in current aircraft
Fibre Reinforced Composites Engineering (spring)

An introductory module on the design, manufacture and performance of fibre-reinforced composite materials. 

Constituent materials including fibres, resins and additives are described. Processing techniques and the relationships between process and design are highlighted. Design methodologies and computer-aided engineering techniques are demonstrated for component design. Case studies from a variety of industries including automotive and aerospace are presented.

Method and Frequency of Class:

Activity Number of Weeks Number of sessions Duration of a session
Lecture 12 weeks 1 week 2 hours

 Method of Assessment:

Assessment Type Weight Requirements
Exam 1 100.00 2 hour exam
Introduction to Space

The aim of this module is to provide an introduction to Space Missions elements such that the students will have a preliminary idea of what knowledge is required to design a space system. The main topics covered are:

  • A brief history of Space Conquest,
  • The Space Environment and its effects
  • Space Missions Elements and Design Phases
  • Orbital Mechanics and Orbital Transfer Overview
  • Spacecraft Elements ( Structure, EPS, OBDH, AODCS, TT&C, Thermal)
  • Space Debris

As part of the module students will use a range of software to design and analyse the performance of a space mission. The outcome of the study will be presented and assessed via a 5,000 word report.

Manufacturing Automation

The aim of the module is to introduce students to the fundamental concepts of manufacturing automation, present key automation technologies in manufacturing and their advantages and limitations.

The module will introduce the relevant theoretical background and fundamental concepts of different automation approaches and technologies. The focus will be placed on the role of sensors, CNC machine tools, industrial robotics and programmable logic controllers within different manufacturing contexts. Methods and indicators for quantitative production performance and cost analysis will be covered as well.

The above is a sample of the typical modules we offer but is not intended to be construed and/or relied upon as a definitive list of the modules that will be available in any given year. Modules (including methods of assessment) may change or be updated, or modules may be cancelled, over the duration of the course due to a number of reasons such as curriculum developments or staffing changes. Please refer to the module catalogue for information on available modules. This content was last updated on

At the end of year three you will spend a year working in industry. You will gain first hand experience of the exciting challenges that are faced by aerospace engineers, and will significantly enhance your technical and managerial engineering skills.

During the placement, students are classed as employees of the host company, but also remain fully registered with the University and receive support from their tutor throughout the placement. The faculty has a dedicated  Placements Team who work closely with our Careers and Employability Team to support you in finding the right placement.

Core

Aerospace Industry Organisation (autumn)

The module offers a comprehensive account on the organisation practices across the aerospace industry worldwide. It strikes a balance on the discussions between common practices in the industry and individual characteristics of a range of typical/leading companies. 

The contents will cover, but are not restricted to, some of the following aspects:

  • Products (air/space; commercial/military; airplanes/helicopters/UAVs)
  • Markets (airframes/engines/systems - approximate shares of major players)
  • Supply chain
  • Research and development
  • Regulatory aspects (airworthiness certification, regulatory bodies)

In addition to designated lectures delivered by University of Nottingham members of staff, invited speakers will be sought from the front runners in the industry. The intended candidates are as follows:

  • An airframer (probably Airbus or Boeing UK)
  • A major component supplier (e.g. GKN or Rolls Royce)
  • An airline perspective (e.g. BA)
  • A small component or equipment manufacturer, (e.g. an actuator company) 
  • A government perspective (e.g. someone from BIS, the Aerospace and Defence KTN the EU or even the MAA regional aerospace alliance)
  • A certification authority (e.g. CAA or similar).

Method and Frequency of Class:

Activity Number of Weeks Number of sessions Duration of a session
Lecture 11 weeks 1 week 2 hours

 Method of Assessment:

Assessment Type Weight Requirements
Coursework 1 33.00 Aerospace organisation: a report (1,000 words) on the organisation of a typical aerospace company
Coursework 2 33.00 Certification: answering the questions (1,000 words) set by the speakers on the airworthiness certification
Presentation 1 33.00 Supply chain: presentation on the supply chain - max 10 minutes
MEng Individual Project

The project aims to give experience in the practice of engineering at a professional level. It involves the planning, execution and reporting of a programme of work which will normally involve a mixture of experimental, theoretical and computational work together with a review of relevant previous work in the field.

Systems Engineering

This module presents a way of thinking about systems in general and a way of mapping the composition and integration of systems and of system components. It shows how projects are organised and managed in order to translate complex, diverse requirements into integrated, robust design solutions. The main topics are:

  • How to think about systems and systems of systems
  • Requirements and Capabilities
  • Uncertainty, Risk, Sensitivity and Robustness
  • Architectures, Integration and Interoperability
  • A Systems Approach to Design and Optimisation
  • A Systems Approach to Test and Evaluation
  • Safety, Dependability and Predictability of Complex Systems
  • Managing a Systems Engineering Process

The lectures are accompanied by a semester-long design challenge that lets the students gain practical experience of managing a systems engineering process.

Optional

Advanced Dynamics and Vibration

This module covers advanced concepts and analytical methods used to analyse the dynamics and vibration of mechanical systems. Topics covered include:

  • Lagrange’s Equation
  • linearisation of equations of motion
  • 3D Rigid Body Dynamics in moving (translating and rotating) reference frames
  • dynamics and stability of rotating machinery
  • vibration response of complex structures and machines

A number of engineering case studies are presented, including robotics manipulators, gyroscopic sensors, shaft whirl, shock response spectra, vibration absorbers, flight dynamics, and vibration of aerostructures. Skills in modelling and simulation with reference to MATLAB/Simulink are developed.

Additive Manufacturing and 3D printing

The aim of this module is to provide students with detailed knowledge of the various Additive Manufacturing technologies including specific design, material and process principles. Students will gain an insight into current and future applications as well as the research developments required for the advancement of this technology.

This module will cover design, processing and material aspects of Additive Manufacturing and 3D Printing technologies, as well as the current and potential applications of the technology in a wide variety of sectors. Topics covered will include:

  • commercial and experimental systems
  • material requirements
  • design for Additive Manufacturing
  • software and systems
Advanced Materials Characterisation (autumn)

This module adopts a broad approach, covering the principles underpinning a wide range of materials characterisation techniques, for imaging, structural characterisation and chemical analysis.

Emphasis is given to the process, structure, property interrelationship, backed up by appropriate case studies taken from the areas of structural materials, functional materials, biomaterials and nanomaterials.

Detailed content underpinning the module includes particle / material interactions and wave / material interactions; the experimental process; crystallography; defects; reciprocal space and diffraction.

Consideration is given to instrumentation, vacuum systems, electron sources and detectors etc and described with reference to the techniques of SEM, TEM, XRD, XRF and XPS.

An overview of related surface analysis techniques and ion beam techniques is provided. Aspects of sample preparation, including FIB milling are also covered.

Computational Fluid Dynamics

In this module you’ll develop an advanced understanding of fluid mechanics. You’ll use computational methods in fluid mechanics to further understand how techniques are applied to real fluid engineering problems. For example, you’ll study fluid/structure interactions, air flow, channel flow and water wave propagation. You’ll spend between two and four hours in lectures and two hours in computing sessions each week.

Introduction to Turbulence and Turbulent Flows (autumn)

This is an advanced module in fluid mechanics applicable to a wide range of engineering disciplines. You will develop understanding and application skills of basic concepts and fundamental knowledge in turbulence and turbulent flows in engineering.

Topics to be covered include:

  • fundamental theory of turbulence
  • statistical description of turbulence
  • boundary layer structures
  • turbulent flow control
  • turbulence modelling and CFD
  • experimental techniques
  • practical and industrial examples

Delivery

Activity Number of Weeks Number of sessions Duration of a session
Lecture 11 weeks 1 week 2 hours

Assessment method

Assessment Type Weight Requirements
Coursework 30.00

Assessed extended laboratory report based on experimental data on turbulent boundary layer taken in the wind tunnel.

Exam 70.00 Closed book examination.
Finite Element Analysis

This module will allow the theoretical background needed to understand linear Finite Element analysis. To present a number of examples to illustrate how practical problems can be analysed using FE software.

You will cover the following topics: 

  • Structural analysis
  • Derivation of finite element equations using energy considerations
  • Linear and quadratic elements
  • Beam, plate and shell elements
  • Practical applications of finite elements in stress analysis problems
  • Examples of finite element applications
  • Introduction to thermal problems
  • Introduction to non-linear problems
Joining Technology (spring)

This module examines, in-depth, the processes used for joining metallic (e.g. steel, aluminium and titanium alloys) and non-metallic (e.g. polymers and fibre reinforced composites) materials. 

Topics covered include:

  • mechanical joining
  • adhesive bonding
  • soldering and brazing
  • solid state joining (friction welding and diffusion bonding)
  • fusion welding (arc welding and the many classes thereof, resistance, electron beam and laser welding)

The fundamental characteristics of the various processes are examined along with procedures for practical applications. The origins of defects within joints and methods needed to control or eliminate them are also considered. The mechanical behaviour of joints is analysed, as is the effect of joining on the microstructural characteristics and mechanical properties of the base materials. Other features such as residual stress and distortion are addressed. Attention is also given to appropriate design for manufacture in a modern manufacturing context.

Method and Frequency of Class:

Activity Number of Weeks Number of sessions Duration of a session
Lecture 12 weeks 1 week 2 hours

 Method of Assessment:

Assessment Type Weight Requirements
Coursework 1 25.00 Case study review
Exam 1 75.00 1 hour 30 minute unseen written exam
Power Systems for Aerospace, Marine and Automotive Applications

This module aims to develop an understanding of the design and operation of power systems in aerospace, marine and automotive applications. With the introduction of more electrical technologies in these application areas, the understanding and expected performance of the power system has become a critical platform design issue. You’ll have five blocks of four hour lectures to study for this module.

Studying Human Performance (autumn)

This module aims to give a broad review of the measurement techniques which can be used in ergonomic analysis and evaluation of systems or products, together with an understanding of the need for experimental design and control in order to obtain valid and meaningful results. It also provides a theoretical basis for techniques which may be practised during laboratory work and exercises in other human factors modules.

The module covers:

  • Introduction to experimental design; experimental controls; selection and recruitment of subjects; user trials; ethical considerations
  • Observational methods: direct and indirect observation; recording techniques; measurement of behaviour; activity sampling
  • Subjective measurements: ranking methods, rating scales, application in interviews and questionnaires
  • Task analysis: task description; tabular and hierarchical task analysis; applications
  • Introduction to SPSS
  • Descriptive statistics
  • Statistical analysis: Types of data; Normal distribution; Non-parametric tests; Parametric 2 samples tests, Correlation and regression, Chi Square, ANOVA
Spacecraft Systems and Design

The aim of this module is to provide theoretical and practical tools to design a spacecraft mission. The main topics covered are:

  • Fundamentals of Orbital Mechanics and Astrodynamics
  • Space Mission Analysis and Design
  • Design of Spacecraft Subsystems
  • Assembly, Integration, Test and Verification
  • Satellite in orbit operations
  • Spacecraft Mission Performance and Risk Analysis (at Subsystems and Systems levels)

As part of the module, students will use a range of software to design and analyse the space mission and the spacecraft subsystems performances. The outcome of the study will be presented and assessed via a 5,000-word report and a 2-hour exam.

The above is a sample of the typical modules we offer but is not intended to be construed and/or relied upon as a definitive list of the modules that will be available in any given year. Modules (including methods of assessment) may change or be updated, or modules may be cancelled, over the duration of the course due to a number of reasons such as curriculum developments or staffing changes. Please refer to the module catalogue for information on available modules. This content was last updated on

Fees and funding

UK students

£9250
Per year

International students

£23760*
Per year
*For full details including fees for part-time students and reduced fees during your time studying abroad or on placement (where applicable), see our fees page.

If you are a student from the EU, EEA or Switzerland starting your course in the 2021/22 academic year, you will pay international tuition fees.

This does not apply to Irish students, who will be charged tuition fees at the same rate as UK students. UK nationals living in the EU, EEA and Switzerland will also continue to be eligible for ‘home’ fee status at UK universities until 31 December 2027.

For further guidance, check our Brexit information for future students.

Scholarships and bursaries

The University of Nottingham offers a wide range of bursaries and scholarships. These funds can provide you with an additional source of non-repayable financial help. For up to date information regarding tuition fees, visit our fees and finance pages.

Faculty-specific funding

In addition to the above, students applying to the Faculty of Engineering may be eligible for faculty-specific or industry scholarships.

Home students*

Over one third of our UK students receive our means-tested core bursary, worth up to £1,000 a year. Full details can be found on our financial support pages.

* A 'home' student is one who meets certain UK residence criteria. These are the same criteria as apply to eligibility for home funding from Student Finance.

International students

We offer a range of international undergraduate scholarships for high-achieving international scholars who can put their Nottingham degree to great use in their careers.

International scholarships

Careers

Professional recognition

These degrees have been accredited by the Institution of Mechanical Engineers (IMechE) and provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng).

Engineering Council accredited degree

Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

We are currently following the defined and recognised processes for becoming accredited by the Royal Aeronautical Society (RAeS) and the Institute of Engineering and Technology (IET) under licence from the UK regulator, the Engineering Council.

Boost your earning potential

Which university courses boost graduate wages the most? Studying with us could help you to earn more.

  • We are second highest in the UK for female engineering graduate earnings, five years after graduation
  • We are second highest in the Midlands for male engineering graduate earnings, five years after graduation

(Source: Institute for Fiscal Studies data: www.bbc.co.uk/news/education-44413086)

Average starting salary and career progression

83.2% of undergraduates from the Department of Mechanical, Materials and Manufacturing Engineering secured graduate level employment or further study within 15 months of graduation. The average annual salary for these graduates was £29,073.00.*

* HESA Graduate Outcomes 2020. The Graduate Outcomes % is derived using The Guardian University Guide methodology. The average annual salary is based on graduates working full-time within the UK.

Studying for a degree at the University of Nottingham will provide you with the type of skills and experiences that will prove invaluable in any career, whichever direction you decide to take.

Throughout your time with us, our Careers and Employability Service can work with you to improve your employability skills even further; assisting with job or course applications, searching for appropriate work experience placements and hosting events to bring you closer to a wide range of prospective employers.

Have a look at our careers page for an overview of all the employability support and opportunities that we provide to current students.

The University of Nottingham is consistently named as one of the most targeted universities by Britain’s leading graduate employers (Ranked in the top ten in The Graduate Market in 2013-2020, High Fliers Research).

Dummy placeholder image

Related courses

Important information

This online prospectus has been drafted in advance of the academic year to which it applies. Every effort has been made to ensure that the information is accurate at the time of publishing, but changes (for example to course content) are likely to occur given the interval between publishing and commencement of the course. It is therefore very important to check this website for any updates before you apply for the course where there has been an interval between you reading this website and applying.